From: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@pmcs.com>
To: JBottomley@odin.com, linux-scsi@vger.kernel.org
Cc: Mahesh.Rajashekhara@pmcs.com, Murthy.Bhat@pmcs.com,
Gana.Sridaran@pmcs.com, aacraid@pmc-sierra.com,
Scott.Benesh@pmcs.com, jthumshirn@suse.de, thenzl@redhat.com,
David.Carroll@pmcs.com, RaghavaAditya.Renukunta@pmcs.com
Subject: [PATCH V2 8/9] aacraid: Fix character device re-initialization
Date: Wed, 6 Jan 2016 23:22:23 -0800 [thread overview]
Message-ID: <1452151344-417-9-git-send-email-RaghavaAditya.Renukunta@pmcs.com> (raw)
In-Reply-To: <1452151344-417-1-git-send-email-RaghavaAditya.Renukunta@pmcs.com>
From: Raghava Aditya Renukunta <raghavaaditya.renukunta@pmcs.com>
During EEH PCI hotplug activity kernel unloads and loads the driver,
causing character device to be unregistered(aac_remove_one).When the
driver is loaded back using aac_probe_one the character device needs
to be registered again for the AIF management tools to work.
Fixed by adding code to register character device in aac_probe_one if
it is unregistered in aac_remove_one.
Changes in V2:
Added macros to track character device state
Signed-off-by: Raghava Aditya Renukunta <raghavaaditya.renukunta@pmcs.com>
---
drivers/scsi/aacraid/aacraid.h | 7 +++++++
drivers/scsi/aacraid/linit.c | 21 ++++++++++++++-------
2 files changed, 21 insertions(+), 7 deletions(-)
diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
index 2916288..a440840 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -94,6 +94,13 @@ enum {
#define aac_phys_to_logical(x) ((x)+1)
#define aac_logical_to_phys(x) ((x)?(x)-1:0)
+/*
+ * These macros are for keeping track of
+ * character device state.
+ */
+#define AAC_CHARDEV_UNREGISTERED (-1)
+#define AAC_CHARDEV_NEEDS_REINIT (-2)
+
/* #define AAC_DETAILED_STATUS_INFO */
struct diskparm
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index 6944560..fea1ba1 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -80,7 +80,7 @@ MODULE_VERSION(AAC_DRIVER_FULL_VERSION);
static DEFINE_MUTEX(aac_mutex);
static LIST_HEAD(aac_devices);
-static int aac_cfg_major = -1;
+static int aac_cfg_major = AAC_CHARDEV_UNREGISTERED;
char aac_driver_version[] = AAC_DRIVER_FULL_VERSION;
/*
@@ -1123,6 +1123,13 @@ static void __aac_shutdown(struct aac_dev * aac)
else if (aac->max_msix > 1)
pci_disable_msix(aac->pdev);
}
+static void aac_init_char(void)
+{
+ aac_cfg_major = register_chrdev(0, "aac", &aac_cfg_fops);
+ if (aac_cfg_major < 0) {
+ pr_err("aacraid: unable to register \"aac\" device.\n");
+ }
+}
static int aac_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
{
@@ -1180,6 +1187,9 @@ static int aac_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
shost->max_cmd_len = 16;
shost->use_cmd_list = 1;
+ if (aac_cfg_major == AAC_CHARDEV_NEEDS_REINIT)
+ aac_init_char();
+
aac = (struct aac_dev *)shost->hostdata;
aac->base_start = pci_resource_start(pdev, 0);
aac->scsi_host_ptr = shost;
@@ -1517,7 +1527,7 @@ static void aac_remove_one(struct pci_dev *pdev)
pci_disable_device(pdev);
if (list_empty(&aac_devices)) {
unregister_chrdev(aac_cfg_major, "aac");
- aac_cfg_major = -1;
+ aac_cfg_major = AAC_CHARDEV_NEEDS_REINIT;
}
}
@@ -1680,11 +1690,8 @@ static int __init aac_init(void)
if (error < 0)
return error;
- aac_cfg_major = register_chrdev( 0, "aac", &aac_cfg_fops);
- if (aac_cfg_major < 0) {
- printk(KERN_WARNING
- "aacraid: unable to register \"aac\" device.\n");
- }
+ aac_init_char();
+
return 0;
}
--
1.9.1
next prev parent reply other threads:[~2016-01-06 23:12 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-07 7:22 [PATCH V2 0/9] aacraid: Patchset for aacraid driver version 41052 Raghava Aditya Renukunta
2016-01-07 7:22 ` [PATCH V2 1/9] aacraid: SCSI blk tag support Raghava Aditya Renukunta
2016-01-07 7:22 ` [PATCH V2 2/9] aacraid: Fix RRQ overload Raghava Aditya Renukunta
2016-01-07 7:22 ` [PATCH V2 3/9] aacraid: Added EEH support Raghava Aditya Renukunta
2016-01-09 23:23 ` kbuild test robot
2016-01-07 7:22 ` [PATCH V2 4/9] aacraid: Fix memory leak in aac_fib_map_free Raghava Aditya Renukunta
2016-01-07 7:22 ` [PATCH V2 5/9] aacraid: Set correct msix count for EEH recovery Raghava Aditya Renukunta
2016-01-08 5:00 ` Seymour, Shane M
2016-01-07 7:22 ` [PATCH V2 6/9] aacraid: Fundamental reset support for Series 7 Raghava Aditya Renukunta
2016-01-07 7:22 ` [PATCH V2 7/9] aacraid: Fix AIF triggered IOP_RESET Raghava Aditya Renukunta
2016-01-08 5:57 ` Seymour, Shane M
2016-01-08 23:37 ` Raghava Aditya Renukunta
2016-01-07 7:22 ` Raghava Aditya Renukunta [this message]
2016-01-08 6:42 ` [PATCH V2 8/9] aacraid: Fix character device re-initialization Seymour, Shane M
2016-01-07 7:22 ` [PATCH V2 9/9] aacraid: Update driver version Raghava Aditya Renukunta
-- strict thread matches above, loose matches on Subject: below --
2015-12-10 18:45 [PATCH V2 0/9] aacraid: Patchset for aacraid driver version 41052 Raghava Aditya Renukunta
2015-12-10 18:45 ` [PATCH v2 8/9] aacraid: Fix character device re-initialization Raghava Aditya Renukunta
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1452151344-417-9-git-send-email-RaghavaAditya.Renukunta@pmcs.com \
--to=raghavaaditya.renukunta@pmcs.com \
--cc=David.Carroll@pmcs.com \
--cc=Gana.Sridaran@pmcs.com \
--cc=JBottomley@odin.com \
--cc=Mahesh.Rajashekhara@pmcs.com \
--cc=Murthy.Bhat@pmcs.com \
--cc=Scott.Benesh@pmcs.com \
--cc=aacraid@pmc-sierra.com \
--cc=jthumshirn@suse.de \
--cc=linux-scsi@vger.kernel.org \
--cc=thenzl@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).