From: Hannes Reinecke <hare@suse.de>
To: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: James Bottomley <james.bottomley@hansenpartnership.com>,
Christoph Hellwig <hch@lst.de>,
Bart von Assche <bart.vanassche@sandisk.com>,
Ewan Milne <emilne@redhat.com>,
linux-scsi@vger.kernel.org, Hannes Reinecke <hare@suse.de>
Subject: [PATCHv3 18/24] scsi_dh_alua: update all port states
Date: Wed, 13 Jan 2016 09:09:53 +0100 [thread overview]
Message-ID: <1452672599-9820-19-git-send-email-hare@suse.de> (raw)
In-Reply-To: <1452672599-9820-1-git-send-email-hare@suse.de>
When we read in the target port group state we should be
updating all affected port groups, otherwise we risk
running out of sync.
Signed-off-by: Hannes Reinecke <hare@suse.de>
---
drivers/scsi/device_handler/scsi_dh_alua.c | 31 +++++++++++++++++++++---------
1 file changed, 22 insertions(+), 9 deletions(-)
diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c
index 294551a..e347a31 100644
--- a/drivers/scsi/device_handler/scsi_dh_alua.c
+++ b/drivers/scsi/device_handler/scsi_dh_alua.c
@@ -490,11 +490,13 @@ static int alua_check_sense(struct scsi_device *sdev,
static int alua_rtpg(struct scsi_device *sdev, struct alua_port_group *pg)
{
struct scsi_sense_hdr sense_hdr;
+ struct alua_port_group *tmp_pg;
int len, k, off, valid_states = 0, bufflen = ALUA_RTPG_SIZE;
- unsigned char *ucp, *buff;
+ unsigned char *desc, *buff;
unsigned err, retval;
unsigned int tpg_desc_tbl_off;
unsigned char orig_transition_tmo;
+ unsigned long flags;
if (!pg->expiry) {
unsigned long transition_tmo = ALUA_FAILOVER_TIMEOUT * HZ;
@@ -596,16 +598,27 @@ static int alua_rtpg(struct scsi_device *sdev, struct alua_port_group *pg)
else
tpg_desc_tbl_off = 4;
- for (k = tpg_desc_tbl_off, ucp = buff + tpg_desc_tbl_off;
+ for (k = tpg_desc_tbl_off, desc = buff + tpg_desc_tbl_off;
k < len;
- k += off, ucp += off) {
-
- if (pg->group_id == get_unaligned_be16(&ucp[2])) {
- pg->state = ucp[0] & 0x0f;
- pg->pref = ucp[0] >> 7;
- valid_states = ucp[1];
+ k += off, desc += off) {
+ u16 group_id = get_unaligned_be16(&desc[2]);
+
+ spin_lock_irqsave(&port_group_lock, flags);
+ list_for_each_entry(tmp_pg, &port_group_list, node) {
+ if (tmp_pg->group_id != group_id)
+ continue;
+ if (tmp_pg->device_id_len != pg->device_id_len)
+ continue;
+ if (strncmp(tmp_pg->device_id_str, pg->device_id_str,
+ tmp_pg->device_id_len))
+ continue;
+ tmp_pg->state = desc[0] & 0x0f;
+ tmp_pg->pref = desc[0] >> 7;
+ if (tmp_pg == pg)
+ valid_states = desc[1];
}
- off = 8 + (ucp[7] * 4);
+ spin_unlock_irqrestore(&port_group_lock, flags);
+ off = 8 + (desc[7] * 4);
}
sdev_printk(KERN_INFO, sdev,
--
1.8.5.6
next prev parent reply other threads:[~2016-01-13 8:10 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-13 8:09 [PATCHv3 00/24] ALUA device handler update, part II Hannes Reinecke
2016-01-13 8:09 ` [PATCHv3 01/24] scsi_dh_alua: Pass buffer as function argument Hannes Reinecke
2016-01-13 8:09 ` [PATCHv3 02/24] scsi_dh_alua: separate out alua_stpg() Hannes Reinecke
2016-01-13 8:09 ` [PATCHv3 03/24] scsi_dh_alua: Make stpg synchronous Hannes Reinecke
2016-01-13 8:09 ` [PATCHv3 04/24] scsi_dh_alua: call alua_rtpg() if stpg fails Hannes Reinecke
2016-01-13 8:09 ` [PATCHv3 05/24] scsi_dh_alua: switch to scsi_execute_req_flags() Hannes Reinecke
2016-01-13 8:09 ` [PATCHv3 06/24] scsi_dh_alua: allocate RTPG buffer separately Hannes Reinecke
2016-01-13 8:09 ` [PATCHv3 07/24] scsi_dh_alua: Use separate alua_port_group structure Hannes Reinecke
2016-01-13 8:09 ` [PATCHv3 08/24] scsi_dh_alua: use unique device id Hannes Reinecke
2016-01-18 17:44 ` Christoph Hellwig
2016-01-13 8:09 ` [PATCHv3 09/24] scsi_dh_alua: simplify alua_initialize() Hannes Reinecke
2016-01-13 8:09 ` [PATCHv3 10/24] revert commit a8e5a2d593cb ("[SCSI] scsi_dh_alua: ALUA handler attach should succeed while TPG is transitioning") Hannes Reinecke
2016-01-13 8:09 ` [PATCHv3 11/24] scsi_dh_alua: move optimize_stpg evaluation Hannes Reinecke
2016-01-13 8:09 ` [PATCHv3 12/24] scsi_dh_alua: remove 'rel_port' from alua_dh_data structure Hannes Reinecke
2016-01-13 8:09 ` [PATCHv3 13/24] scsi_dh_alua: Use workqueue for RTPG Hannes Reinecke
2016-01-13 8:09 ` [PATCHv3 14/24] scsi_dh_alua: Allow workqueue to run synchronously Hannes Reinecke
2016-01-18 17:45 ` Christoph Hellwig
2016-01-13 8:09 ` [PATCHv3 15/24] scsi_devinfo: move scsi_get_device_flags into scsi_devinfo.h Hannes Reinecke
2016-01-18 17:49 ` Christoph Hellwig
2016-01-13 8:09 ` [PATCHv3 16/24] scsi_dh_alua: Add new blacklist flag 'BLIST_SYNC_ALUA' Hannes Reinecke
2016-01-18 17:50 ` Christoph Hellwig
2016-01-13 8:09 ` [PATCHv3 17/24] scsi_dh_alua: Recheck state on unit attention Hannes Reinecke
2016-01-13 8:09 ` Hannes Reinecke [this message]
2016-01-18 17:51 ` [PATCHv3 18/24] scsi_dh_alua: update all port states Christoph Hellwig
2016-01-13 8:09 ` [PATCHv3 19/24] scsi_dh_alua: Send TEST UNIT READY to poll for transitioning Hannes Reinecke
2016-01-13 8:09 ` [PATCHv3 20/24] scsi_dh: add 'rescan' callback Hannes Reinecke
2016-01-13 8:09 ` [PATCHv3 21/24] scsi: Add 'access_state' attribute Hannes Reinecke
2016-01-13 8:09 ` [PATCHv3 22/24] scsi_dh_alua: use common definitions for ALUA state Hannes Reinecke
2016-01-13 8:09 ` [PATCHv3 23/24] scsi_dh_alua: update 'access_state' field Hannes Reinecke
2016-01-18 17:52 ` Christoph Hellwig
2016-01-13 8:09 ` [PATCHv3 24/24] scsi_dh_alua: Update version to 2.0 Hannes Reinecke
2016-01-18 17:52 ` Christoph Hellwig
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1452672599-9820-19-git-send-email-hare@suse.de \
--to=hare@suse.de \
--cc=bart.vanassche@sandisk.com \
--cc=emilne@redhat.com \
--cc=hch@lst.de \
--cc=james.bottomley@hansenpartnership.com \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).