From: Hannes Reinecke <hare@suse.de>
To: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: James Bottomley <james.bottomley@hansenpartnership.com>,
Christoph Hellwig <hch@lst.de>,
Bart von Assche <bart.vanassche@sandisk.com>,
Ewan Milne <emilne@redhat.com>,
linux-scsi@vger.kernel.org, Hannes Reinecke <hare@suse.de>
Subject: [PATCHv3 01/24] scsi_dh_alua: Pass buffer as function argument
Date: Wed, 13 Jan 2016 09:09:36 +0100 [thread overview]
Message-ID: <1452672599-9820-2-git-send-email-hare@suse.de> (raw)
In-Reply-To: <1452672599-9820-1-git-send-email-hare@suse.de>
Pass in the buffer as a function argument for submit_rtpg().
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
---
drivers/scsi/device_handler/scsi_dh_alua.c | 13 +++++++------
1 file changed, 7 insertions(+), 6 deletions(-)
diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c
index 5a328bf..df71e85 100644
--- a/drivers/scsi/device_handler/scsi_dh_alua.c
+++ b/drivers/scsi/device_handler/scsi_dh_alua.c
@@ -135,12 +135,13 @@ static struct request *get_alua_req(struct scsi_device *sdev,
* submit_rtpg - Issue a REPORT TARGET GROUP STATES command
* @sdev: sdev the command should be sent to
*/
-static unsigned submit_rtpg(struct scsi_device *sdev, struct alua_dh_data *h)
+static unsigned submit_rtpg(struct scsi_device *sdev, unsigned char *buff,
+ int bufflen, unsigned char *sense, int flags)
{
struct request *rq;
int err = 0;
- rq = get_alua_req(sdev, h->buff, h->bufflen, READ);
+ rq = get_alua_req(sdev, buff, bufflen, READ);
if (!rq) {
err = DRIVER_BUSY << 24;
goto done;
@@ -148,14 +149,14 @@ static unsigned submit_rtpg(struct scsi_device *sdev, struct alua_dh_data *h)
/* Prepare the command. */
rq->cmd[0] = MAINTENANCE_IN;
- if (!(h->flags & ALUA_RTPG_EXT_HDR_UNSUPP))
+ if (!(flags & ALUA_RTPG_EXT_HDR_UNSUPP))
rq->cmd[1] = MI_REPORT_TARGET_PGS | MI_EXT_HDR_PARAM_FMT;
else
rq->cmd[1] = MI_REPORT_TARGET_PGS;
- put_unaligned_be32(h->bufflen, &rq->cmd[6]);
+ put_unaligned_be32(bufflen, &rq->cmd[6]);
rq->cmd_len = COMMAND_SIZE(MAINTENANCE_IN);
- rq->sense = h->sense;
+ rq->sense = sense;
memset(rq->sense, 0, SCSI_SENSE_BUFFERSIZE);
rq->sense_len = 0;
@@ -446,7 +447,7 @@ static int alua_rtpg(struct scsi_device *sdev, struct alua_dh_data *h, int wait_
expiry = round_jiffies_up(jiffies + h->transition_tmo * HZ);
retry:
- retval = submit_rtpg(sdev, h);
+ retval = submit_rtpg(sdev, h->buff, h->bufflen, h->sense, h->flags);
if (retval) {
if (!scsi_normalize_sense(h->sense, SCSI_SENSE_BUFFERSIZE,
&sense_hdr)) {
--
1.8.5.6
next prev parent reply other threads:[~2016-01-13 8:10 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-13 8:09 [PATCHv3 00/24] ALUA device handler update, part II Hannes Reinecke
2016-01-13 8:09 ` Hannes Reinecke [this message]
2016-01-13 8:09 ` [PATCHv3 02/24] scsi_dh_alua: separate out alua_stpg() Hannes Reinecke
2016-01-13 8:09 ` [PATCHv3 03/24] scsi_dh_alua: Make stpg synchronous Hannes Reinecke
2016-01-13 8:09 ` [PATCHv3 04/24] scsi_dh_alua: call alua_rtpg() if stpg fails Hannes Reinecke
2016-01-13 8:09 ` [PATCHv3 05/24] scsi_dh_alua: switch to scsi_execute_req_flags() Hannes Reinecke
2016-01-13 8:09 ` [PATCHv3 06/24] scsi_dh_alua: allocate RTPG buffer separately Hannes Reinecke
2016-01-13 8:09 ` [PATCHv3 07/24] scsi_dh_alua: Use separate alua_port_group structure Hannes Reinecke
2016-01-13 8:09 ` [PATCHv3 08/24] scsi_dh_alua: use unique device id Hannes Reinecke
2016-01-18 17:44 ` Christoph Hellwig
2016-01-13 8:09 ` [PATCHv3 09/24] scsi_dh_alua: simplify alua_initialize() Hannes Reinecke
2016-01-13 8:09 ` [PATCHv3 10/24] revert commit a8e5a2d593cb ("[SCSI] scsi_dh_alua: ALUA handler attach should succeed while TPG is transitioning") Hannes Reinecke
2016-01-13 8:09 ` [PATCHv3 11/24] scsi_dh_alua: move optimize_stpg evaluation Hannes Reinecke
2016-01-13 8:09 ` [PATCHv3 12/24] scsi_dh_alua: remove 'rel_port' from alua_dh_data structure Hannes Reinecke
2016-01-13 8:09 ` [PATCHv3 13/24] scsi_dh_alua: Use workqueue for RTPG Hannes Reinecke
2016-01-13 8:09 ` [PATCHv3 14/24] scsi_dh_alua: Allow workqueue to run synchronously Hannes Reinecke
2016-01-18 17:45 ` Christoph Hellwig
2016-01-13 8:09 ` [PATCHv3 15/24] scsi_devinfo: move scsi_get_device_flags into scsi_devinfo.h Hannes Reinecke
2016-01-18 17:49 ` Christoph Hellwig
2016-01-13 8:09 ` [PATCHv3 16/24] scsi_dh_alua: Add new blacklist flag 'BLIST_SYNC_ALUA' Hannes Reinecke
2016-01-18 17:50 ` Christoph Hellwig
2016-01-13 8:09 ` [PATCHv3 17/24] scsi_dh_alua: Recheck state on unit attention Hannes Reinecke
2016-01-13 8:09 ` [PATCHv3 18/24] scsi_dh_alua: update all port states Hannes Reinecke
2016-01-18 17:51 ` Christoph Hellwig
2016-01-13 8:09 ` [PATCHv3 19/24] scsi_dh_alua: Send TEST UNIT READY to poll for transitioning Hannes Reinecke
2016-01-13 8:09 ` [PATCHv3 20/24] scsi_dh: add 'rescan' callback Hannes Reinecke
2016-01-13 8:09 ` [PATCHv3 21/24] scsi: Add 'access_state' attribute Hannes Reinecke
2016-01-13 8:09 ` [PATCHv3 22/24] scsi_dh_alua: use common definitions for ALUA state Hannes Reinecke
2016-01-13 8:09 ` [PATCHv3 23/24] scsi_dh_alua: update 'access_state' field Hannes Reinecke
2016-01-18 17:52 ` Christoph Hellwig
2016-01-13 8:09 ` [PATCHv3 24/24] scsi_dh_alua: Update version to 2.0 Hannes Reinecke
2016-01-18 17:52 ` Christoph Hellwig
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1452672599-9820-2-git-send-email-hare@suse.de \
--to=hare@suse.de \
--cc=bart.vanassche@sandisk.com \
--cc=emilne@redhat.com \
--cc=hch@lst.de \
--cc=james.bottomley@hansenpartnership.com \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).