From: Charles Chiou <ch1102chiou@gmail.com>
To: JBottomley@parallels.com, martin.petersen@oracle.com,
jthumshirn@suse.de, hch@infradead.org, oneukum@suse.de,
linus.chen@tw.promise.com, grace.chang@tw.promise.com,
victor.p@promise.com, eva.cheng@tw.promise.com,
charles.chiou@tw.promise.com
Cc: linux-scsi@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [v2 PATCH 2/3] scsi:stex.c Add hotplug support
Date: Mon, 22 Feb 2016 20:04:25 +0800 [thread overview]
Message-ID: <1456142665-25327-1-git-send-email-ch1102chiou@gmail.com> (raw)
From: Charles <charles.chiou@tw.promise.com>
1. Add hotplug support. Pegasus support surprise removal. To this end, I
use return_abnormal_state function to return DID_NO_CONNECT for all
commands which sent to driver.
2. Remove stex_hba_stop in stex_remove because we cannot send command to
device after hotplug.
3. Add new device status: MU_STATE_STOP, MU_STATE_NOCONNECT,
MU_STATE_STOP. MU_STATE_STOP is currently not referenced.
MU_STATE_NOCONNECT represent that device is plugged out from the host.
4. Use return_abnormal_function() to substitute part of code in stex_do_reset.
Signed-off-by: Charles Chiou <charles.chiou@tw.promise.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
---
drivers/scsi/stex.c | 53 ++++++++++++++++++++++++++++++++++-------------------
1 file changed, 34 insertions(+), 19 deletions(-)
diff --git a/drivers/scsi/stex.c b/drivers/scsi/stex.c
index 495d632..1994603 100644
--- a/drivers/scsi/stex.c
+++ b/drivers/scsi/stex.c
@@ -84,6 +84,8 @@ enum {
MU_STATE_STARTED = 2,
MU_STATE_RESETTING = 3,
MU_STATE_FAILED = 4,
+ MU_STATE_STOP = 5,
+ MU_STATE_NOCONNECT = 6,
MU_MAX_DELAY = 120,
MU_HANDSHAKE_SIGNATURE = 0x55aaaa55,
@@ -537,6 +539,27 @@ stex_ss_send_cmd(struct st_hba *hba, struct req_msg *req, u16 tag)
readl(hba->mmio_base + YH2I_REQ); /* flush */
}
+static void return_abnormal_state(struct st_hba *hba, int status)
+{
+ struct st_ccb *ccb;
+ unsigned long flags;
+ u16 tag;
+
+ spin_lock_irqsave(hba->host->host_lock, flags);
+ for (tag = 0; tag < hba->host->can_queue; tag++) {
+ ccb = &hba->ccb[tag];
+ if (ccb->req == NULL)
+ continue;
+ ccb->req = NULL;
+ if (ccb->cmd) {
+ scsi_dma_unmap(ccb->cmd);
+ ccb->cmd->result = status << 16;
+ ccb->cmd->scsi_done(ccb->cmd);
+ ccb->cmd = NULL;
+ }
+ }
+ spin_unlock_irqrestore(hba->host->host_lock, flags);
+}
static int
stex_slave_config(struct scsi_device *sdev)
{
@@ -560,8 +583,12 @@ stex_queuecommand_lck(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
id = cmd->device->id;
lun = cmd->device->lun;
hba = (struct st_hba *) &host->hostdata[0];
-
- if (unlikely(hba->mu_status == MU_STATE_RESETTING))
+ if (hba->mu_status == MU_STATE_NOCONNECT) {
+ cmd->result = DID_NO_CONNECT;
+ done(cmd);
+ return 0;
+ }
+ if (unlikely(hba->mu_status != MU_STATE_STARTED))
return SCSI_MLQUEUE_HOST_BUSY;
switch (cmd->cmnd[0]) {
@@ -1260,10 +1287,8 @@ static void stex_ss_reset(struct st_hba *hba)
static int stex_do_reset(struct st_hba *hba)
{
- struct st_ccb *ccb;
unsigned long flags;
unsigned int mu_status = MU_STATE_RESETTING;
- u16 tag;
spin_lock_irqsave(hba->host->host_lock, flags);
if (hba->mu_status == MU_STATE_STARTING) {
@@ -1297,20 +1322,8 @@ static int stex_do_reset(struct st_hba *hba)
else if (hba->cardtype == st_yel)
stex_ss_reset(hba);
- spin_lock_irqsave(hba->host->host_lock, flags);
- for (tag = 0; tag < hba->host->can_queue; tag++) {
- ccb = &hba->ccb[tag];
- if (ccb->req == NULL)
- continue;
- ccb->req = NULL;
- if (ccb->cmd) {
- scsi_dma_unmap(ccb->cmd);
- ccb->cmd->result = DID_RESET << 16;
- ccb->cmd->scsi_done(ccb->cmd);
- ccb->cmd = NULL;
- }
- }
- spin_unlock_irqrestore(hba->host->host_lock, flags);
+
+ return_abnormal_state(hba, DID_RESET);
if (stex_handshake(hba) == 0)
return 0;
@@ -1771,9 +1784,11 @@ static void stex_remove(struct pci_dev *pdev)
{
struct st_hba *hba = pci_get_drvdata(pdev);
+ hba->mu_status = MU_STATE_NOCONNECT;
+ return_abnormal_state(hba, DID_NO_CONNECT);
scsi_remove_host(hba->host);
- stex_hba_stop(hba);
+ scsi_block_requests(hba->host);
stex_hba_free(hba);
--
1.9.1
next reply other threads:[~2016-02-22 12:04 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-22 12:04 Charles Chiou [this message]
-- strict thread matches above, loose matches on Subject: below --
2015-09-03 12:31 [v2 PATCH 2/3] scsi:stex.c Add hotplug support Charles Chiou
2015-09-03 14:01 ` Johannes Thumshirn
2016-01-29 11:22 ` Charles Chiou
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1456142665-25327-1-git-send-email-ch1102chiou@gmail.com \
--to=ch1102chiou@gmail.com \
--cc=JBottomley@parallels.com \
--cc=charles.chiou@tw.promise.com \
--cc=eva.cheng@tw.promise.com \
--cc=grace.chang@tw.promise.com \
--cc=hch@infradead.org \
--cc=jthumshirn@suse.de \
--cc=linus.chen@tw.promise.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=oneukum@suse.de \
--cc=victor.p@promise.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).