linux-scsi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Satish Kharat <satishkh@cisco.com>
To: satishkh@cisco.com, linux-scsi@vger.kernel.org
Cc: Sesidhar Baddela <sebaddel@cisco.com>
Subject: [PATCH v1 2/3] Cleanup the I/O pending with fw and has timed out and is used to issue LUN reset
Date: Fri, 18 Mar 2016 11:22:49 -0700	[thread overview]
Message-ID: <1458325370-25615-2-git-send-email-satishkh@cisco.com> (raw)
In-Reply-To: <1458325370-25615-1-git-send-email-satishkh@cisco.com>

In case of LUN reset, the device reset command is issued with one of
the I/Os that has timed out on that LUN. The change is to also return
this I/O with error status set to DID_RESET. In case when the reset
is issued using the sg_reset tool (from sg3_utils) it is a new command
and new_sc is set to 1.
Fnic driver version changed from 1.6.0.19 to 1.6.0.20

Signed-off-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com>
---
 * v1
 - new_sc is set to 1 in cases like lunreset from sg_reset
---
 drivers/scsi/fnic/fnic.h      |  2 +-
 drivers/scsi/fnic/fnic_scsi.c | 38 ++++++++++++++++++++++++++++----------
 2 files changed, 29 insertions(+), 11 deletions(-)

diff --git a/drivers/scsi/fnic/fnic.h b/drivers/scsi/fnic/fnic.h
index 52a53f8..1023eae 100644
--- a/drivers/scsi/fnic/fnic.h
+++ b/drivers/scsi/fnic/fnic.h
@@ -39,7 +39,7 @@
 
 #define DRV_NAME		"fnic"
 #define DRV_DESCRIPTION		"Cisco FCoE HBA Driver"
-#define DRV_VERSION		"1.6.0.19"
+#define DRV_VERSION		"1.6.0.20"
 #define PFX			DRV_NAME ": "
 #define DFX                     DRV_NAME "%d: "
 
diff --git a/drivers/scsi/fnic/fnic_scsi.c b/drivers/scsi/fnic/fnic_scsi.c
index b732fa3..026b93d 100644
--- a/drivers/scsi/fnic/fnic_scsi.c
+++ b/drivers/scsi/fnic/fnic_scsi.c
@@ -2042,7 +2042,9 @@ lr_io_req_end:
  * successfully aborted, 1 otherwise
  */
 static int fnic_clean_pending_aborts(struct fnic *fnic,
-				     struct scsi_cmnd *lr_sc)
+				     struct scsi_cmnd *lr_sc,
+					 bool new_sc)
+
 {
 	int tag, abt_tag;
 	struct fnic_io_req *io_req;
@@ -2060,10 +2062,10 @@ static int fnic_clean_pending_aborts(struct fnic *fnic,
 		spin_lock_irqsave(io_lock, flags);
 		sc = scsi_host_find_tag(fnic->lport->host, tag);
 		/*
-		 * ignore this lun reset cmd or cmds that do not belong to
-		 * this lun
+		 * ignore this lun reset cmd if issued using new SC
+		 * or cmds that do not belong to this lun
 		 */
-		if (!sc || sc == lr_sc || sc->device != lun_dev) {
+		if (!sc || ((sc == lr_sc) && new_sc) || sc->device != lun_dev) {
 			spin_unlock_irqrestore(io_lock, flags);
 			continue;
 		}
@@ -2169,11 +2171,27 @@ static int fnic_clean_pending_aborts(struct fnic *fnic,
 			goto clean_pending_aborts_end;
 		}
 		CMD_STATE(sc) = FNIC_IOREQ_ABTS_COMPLETE;
-		CMD_SP(sc) = NULL;
+
+		/* original sc used for lr is handled by dev reset code */
+		if (sc != lr_sc)
+			CMD_SP(sc) = NULL;
 		spin_unlock_irqrestore(io_lock, flags);
 
-		fnic_release_ioreq_buf(fnic, io_req, sc);
-		mempool_free(io_req, fnic->io_req_pool);
+		/* original sc used for lr is handled by dev reset code */
+		if (sc != lr_sc) {
+			fnic_release_ioreq_buf(fnic, io_req, sc);
+			mempool_free(io_req, fnic->io_req_pool);
+		}
+
+		/*
+		 * Any IO is returned during reset, it needs to call scsi_done
+		 * to return the scsi_cmnd to upper layer.
+		 */
+		if (sc->scsi_done) {
+			/* Set result to let upper SCSI layer retry */
+			sc->result = DID_RESET << 16;
+			sc->scsi_done(sc);
+		}
 	}
 
 	schedule_timeout(msecs_to_jiffies(2 * fnic->config.ed_tov));
@@ -2267,6 +2285,7 @@ int fnic_device_reset(struct scsi_cmnd *sc)
 	int tag = 0;
 	DECLARE_COMPLETION_ONSTACK(tm_done);
 	int tag_gen_flag = 0;   /*to track tags allocated by fnic driver*/
+	bool new_sc = 0;
 
 	/* Wait for rport to unblock */
 	fc_block_scsi_eh(sc);
@@ -2312,13 +2331,12 @@ int fnic_device_reset(struct scsi_cmnd *sc)
 		 * fix the way the EH ioctls work for real, but until
 		 * that happens we fail these explicit requests here.
 		 */
-		if (shost_use_blk_mq(sc->device->host))
-			goto fnic_device_reset_end;
 
 		tag = fnic_scsi_host_start_tag(fnic, sc);
 		if (unlikely(tag == SCSI_NO_TAG))
 			goto fnic_device_reset_end;
 		tag_gen_flag = 1;
+		new_sc=1;
 	}
 	io_lock = fnic_io_lock_hash(fnic, sc);
 	spin_lock_irqsave(io_lock, flags);
@@ -2453,7 +2471,7 @@ int fnic_device_reset(struct scsi_cmnd *sc)
 	 * the lun reset cmd. If all cmds get cleaned, the lun reset
 	 * succeeds
 	 */
-	if (fnic_clean_pending_aborts(fnic, sc)) {
+	if (fnic_clean_pending_aborts(fnic, sc, new_sc)) {
 		spin_lock_irqsave(io_lock, flags);
 		io_req = (struct fnic_io_req *)CMD_SP(sc);
 		FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
-- 
2.4.3


  reply	other threads:[~2016-03-18 18:23 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-03-18 18:22 [PATCH v1 1/3] Fix to cleanup aborted IO to avoid device being offlined by mid-layer Satish Kharat
2016-03-18 18:22 ` Satish Kharat [this message]
2016-03-29 14:06   ` [PATCH v1 2/3] Cleanup the I/O pending with fw and has timed out and is used to issue LUN reset Ewan D. Milne
2016-03-18 18:22 ` [PATCH v1 3/3] Using rport->dd_data to check rport online instead of rport_lookup Satish Kharat
2016-03-29 14:06   ` Ewan D. Milne
2016-03-29 14:06 ` [PATCH v1 1/3] Fix to cleanup aborted IO to avoid device being offlined by mid-layer Ewan D. Milne
2016-03-30  0:46 ` Martin K. Petersen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1458325370-25615-2-git-send-email-satishkh@cisco.com \
    --to=satishkh@cisco.com \
    --cc=linux-scsi@vger.kernel.org \
    --cc=sebaddel@cisco.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).