Re: [PATCH v1 1/3] Fix to cleanup aborted IO to avoid device being offlined by mid-layer

["Ewan D. Milne" <emilne@redhat.com>]

On Fri, 2016-03-18 at 11:22 -0700, Satish Kharat wrote:
> If an I/O times out and an abort issued by host, if the abort is
> successful we need to set scsi status as DID_ABORT. Or else the
> mid-layer error handler which looks for this error code, will
> offline the device. Also if the original I/O is not found in fnic
> firmware, we will consider the abort as successful.
> The start_time assignment is moved because of the new goto.
> Fnic driver version changed from 1.6.0.17a to 1.6.0.19,
> version 1.6.0.18 has been skipped
> 
> Signed-off-by: Satish Kharat <satishkh@cisco.com>
> Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com>
> Reviewed-by: Ewan D. Milne <emilne@redhat.com>
> ---
>  * v1
>  - Moved CMD_ABTS_STATUS assignment to else when not FCPIO_SUCCESS
> 
>  drivers/scsi/fnic/fnic.h      |  2 +-
>  drivers/scsi/fnic/fnic_scsi.c | 35 +++++++++++++++++++++++++++++------
>  2 files changed, 30 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/scsi/fnic/fnic.h b/drivers/scsi/fnic/fnic.h
> index ce129e5..52a53f8 100644
> --- a/drivers/scsi/fnic/fnic.h
> +++ b/drivers/scsi/fnic/fnic.h
> @@ -39,7 +39,7 @@
>  
>  #define DRV_NAME		"fnic"
>  #define DRV_DESCRIPTION		"Cisco FCoE HBA Driver"
> -#define DRV_VERSION		"1.6.0.17a"
> +#define DRV_VERSION		"1.6.0.19"
>  #define PFX			DRV_NAME ": "
>  #define DFX                     DRV_NAME "%d: "
>  
> diff --git a/drivers/scsi/fnic/fnic_scsi.c b/drivers/scsi/fnic/fnic_scsi.c
> index 266b909..b732fa3 100644
> --- a/drivers/scsi/fnic/fnic_scsi.c
> +++ b/drivers/scsi/fnic/fnic_scsi.c
> @@ -1092,6 +1092,11 @@ static void fnic_fcpio_itmf_cmpl_handler(struct fnic *fnic,
>  				atomic64_inc(
>  					&term_stats->terminate_fw_timeouts);
>  			break;
> +		case FCPIO_ITMF_REJECTED:
> +			FNIC_SCSI_DBG(KERN_INFO, fnic->lport->host,
> +				"abort reject recd. id %d\n",
> +				(int)(id & FNIC_TAG_MASK));
> +			break;
>  		case FCPIO_IO_NOT_FOUND:
>  			if (CMD_FLAGS(sc) & FNIC_IO_ABTS_ISSUED)
>  				atomic64_inc(&abts_stats->abort_io_not_found);
> @@ -1112,9 +1117,15 @@ static void fnic_fcpio_itmf_cmpl_handler(struct fnic *fnic,
>  			spin_unlock_irqrestore(io_lock, flags);
>  			return;
>  		}
> -		CMD_ABTS_STATUS(sc) = hdr_status;
> +
>  		CMD_FLAGS(sc) |= FNIC_IO_ABT_TERM_DONE;
>  
> +		/* If the status is IO not found consider it as success */
> +		if (hdr_status == FCPIO_IO_NOT_FOUND)
> +			CMD_ABTS_STATUS(sc) = FCPIO_SUCCESS;
> +		else
> +			CMD_ABTS_STATUS(sc) = hdr_status;
> +
>  		atomic64_dec(&fnic_stats->io_stats.active_ios);
>  		if (atomic64_read(&fnic->io_cmpl_skip))
>  			atomic64_dec(&fnic->io_cmpl_skip);
> @@ -1927,21 +1938,33 @@ int fnic_abort_cmd(struct scsi_cmnd *sc)
>  
>  	CMD_STATE(sc) = FNIC_IOREQ_ABTS_COMPLETE;
>  
> +	start_time = io_req->start_time;
>  	/*
>  	 * firmware completed the abort, check the status,
> -	 * free the io_req irrespective of failure or success
> +	 * free the io_req if successful. If abort fails,
> +	 * Device reset will clean the I/O.
>  	 */
> -	if (CMD_ABTS_STATUS(sc) != FCPIO_SUCCESS)
> +	if (CMD_ABTS_STATUS(sc) == FCPIO_SUCCESS) {
> +		CMD_SP(sc) = NULL;
> +	}
> +	else
> +	{
>  		ret = FAILED;
> -
> -	CMD_SP(sc) = NULL;
> +		spin_unlock_irqrestore(io_lock, flags);
> +		goto fnic_abort_cmd_end;
> +	}
>  
>  	spin_unlock_irqrestore(io_lock, flags);
>  
> -	start_time = io_req->start_time;
>  	fnic_release_ioreq_buf(fnic, io_req, sc);
>  	mempool_free(io_req, fnic->io_req_pool);
>  
> +	if (sc->scsi_done) {
> +	/* Call SCSI completion function to complete the IO */
> +		sc->result = (DID_ABORT << 16);
> +		sc->scsi_done(sc);
> +	}
> +
>  fnic_abort_cmd_end:
>  	FNIC_TRACE(fnic_abort_cmd, sc->device->host->host_no,
>  		  sc->request->tag, sc,

For v1:

Reviewed-by: Ewan D. Milne <emilne@redhat.com>