From: Hans de Goede <hdegoede@redhat.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Gerd Hoffmann <kraxel@redhat.com>
Cc: David Webb <djw@noc.ac.uk>,
linux-usb@vger.kernel.org, linux-scsi@vger.kernel.org,
stable@vger.kernel.org, Hans de Goede <hdegoede@redhat.com>
Subject: [PATCH] uas: Add a new NO_REPORT_LUNS quirk
Date: Thu, 31 Mar 2016 14:22:51 +0200 [thread overview]
Message-ID: <1459426971-11927-1-git-send-email-hdegoede@redhat.com> (raw)
Add a new NO_REPORT_LUNS quirk and set it for Seagate drives with
an usb-id of: 0bc2:331a, as these will fail to respond to a
REPORT_LUNS command.
Cc: stable@vger.kernel.org
Reported-and-tested-by: David Webb <djw@noc.ac.uk>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
drivers/usb/storage/uas.c | 14 +++++++++++++-
drivers/usb/storage/unusual_uas.h | 7 +++++++
drivers/usb/storage/usb.c | 5 ++++-
include/linux/usb_usual.h | 2 ++
4 files changed, 26 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c
index c68e724147..5e15ed03 100644
--- a/drivers/usb/storage/uas.c
+++ b/drivers/usb/storage/uas.c
@@ -2,7 +2,7 @@
* USB Attached SCSI
* Note that this is not the same as the USB Mass Storage driver
*
- * Copyright Hans de Goede <hdegoede@redhat.com> for Red Hat, Inc. 2013 - 2014
+ * Copyright Hans de Goede <hdegoede@redhat.com> for Red Hat, Inc. 2013 - 2016
* Copyright Matthew Wilcox for Intel Corp, 2010
* Copyright Sarah Sharp for Intel Corp, 2010
*
@@ -781,6 +781,17 @@ static int uas_eh_bus_reset_handler(struct scsi_cmnd *cmnd)
return SUCCESS;
}
+static int uas_target_alloc(struct scsi_target *starget)
+{
+ struct uas_dev_info *devinfo = (struct uas_dev_info *)
+ dev_to_shost(starget->dev.parent)->hostdata;
+
+ if (devinfo->flags & US_FL_NO_REPORT_LUNS)
+ starget->no_report_luns = 1;
+
+ return 0;
+}
+
static int uas_slave_alloc(struct scsi_device *sdev)
{
struct uas_dev_info *devinfo =
@@ -831,6 +842,7 @@ static struct scsi_host_template uas_host_template = {
.module = THIS_MODULE,
.name = "uas",
.queuecommand = uas_queuecommand,
+ .target_alloc = uas_target_alloc,
.slave_alloc = uas_slave_alloc,
.slave_configure = uas_slave_configure,
.eh_abort_handler = uas_eh_abort_handler,
diff --git a/drivers/usb/storage/unusual_uas.h b/drivers/usb/storage/unusual_uas.h
index ccc113e..53341a7 100644
--- a/drivers/usb/storage/unusual_uas.h
+++ b/drivers/usb/storage/unusual_uas.h
@@ -64,6 +64,13 @@ UNUSUAL_DEV(0x0bc2, 0x3312, 0x0000, 0x9999,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_NO_ATA_1X),
+/* Reported-by: David Webb <djw@noc.ac.uk> */
+UNUSUAL_DEV(0x0bc2, 0x331a, 0x0000, 0x9999,
+ "Seagate",
+ "Expansion Desk",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_NO_REPORT_LUNS),
+
/* Reported-by: Hans de Goede <hdegoede@redhat.com> */
UNUSUAL_DEV(0x0bc2, 0x3320, 0x0000, 0x9999,
"Seagate",
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index 43576ed..9de988a 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -482,7 +482,7 @@ void usb_stor_adjust_quirks(struct usb_device *udev, unsigned long *fflags)
US_FL_NO_READ_DISC_INFO | US_FL_NO_READ_CAPACITY_16 |
US_FL_INITIAL_READ10 | US_FL_WRITE_CACHE |
US_FL_NO_ATA_1X | US_FL_NO_REPORT_OPCODES |
- US_FL_MAX_SECTORS_240);
+ US_FL_MAX_SECTORS_240 | US_FL_NO_REPORT_LUNS);
p = quirks;
while (*p) {
@@ -532,6 +532,9 @@ void usb_stor_adjust_quirks(struct usb_device *udev, unsigned long *fflags)
case 'i':
f |= US_FL_IGNORE_DEVICE;
break;
+ case 'j':
+ f |= US_FL_NO_REPORT_LUNS;
+ break;
case 'l':
f |= US_FL_NOT_LOCKABLE;
break;
diff --git a/include/linux/usb_usual.h b/include/linux/usb_usual.h
index 7f5f78b..245f57d 100644
--- a/include/linux/usb_usual.h
+++ b/include/linux/usb_usual.h
@@ -79,6 +79,8 @@
/* Cannot handle MI_REPORT_SUPPORTED_OPERATION_CODES */ \
US_FLAG(MAX_SECTORS_240, 0x08000000) \
/* Sets max_sectors to 240 */ \
+ US_FLAG(NO_REPORT_LUNS, 0x10000000) \
+ /* Cannot handle REPORT_LUNS */ \
#define US_FLAG(name, value) US_FL_##name = value ,
enum { US_DO_ALL_FLAGS };
--
2.7.3
next reply other threads:[~2016-03-31 12:22 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-31 12:22 Hans de Goede [this message]
[not found] ` <1459426971-11927-1-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2016-03-31 14:17 ` [PATCH] uas: Add a new NO_REPORT_LUNS quirk Alan Stern
2016-03-31 14:48 ` James Bottomley
2016-03-31 15:03 ` Hans de Goede
[not found] ` <56FD3C27.2050708-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2016-03-31 15:11 ` James Bottomley
2016-03-31 15:23 ` Hans de Goede
[not found] ` <56FD40FE.3030302-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2016-03-31 17:35 ` David Webb
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1459426971-11927-1-git-send-email-hdegoede@redhat.com \
--to=hdegoede@redhat.com \
--cc=djw@noc.ac.uk \
--cc=gregkh@linuxfoundation.org \
--cc=kraxel@redhat.com \
--cc=linux-scsi@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox