[PATCH v3] mvsas: Generalize Marvell 9485 in pci_device_id

[Leonid Moiseichuk <leonid.moiseichuk@gmail.com>]

For generic subvendor has sense to use generic subdevice.
If subdevice ID not equal to 0x9480/0x9485 mvsas will be not activated.

Tested on ASUS P9A-I/C2550/SAS/4L which uses vendor-specific 1043:8635.

v3: add comment and changelog according to Andy's findings
v2: re-phrased commit message

Signed-off-by: Leonid Moiseichuk <leonid.moiseichuk@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
---
 drivers/scsi/mvsas/mv_init.c | 19 +------------------
 1 file changed, 1 insertion(+), 18 deletions(-)

diff --git a/drivers/scsi/mvsas/mv_init.c b/drivers/scsi/mvsas/mv_init.c
index c7c250519c4b..8280046fd1f0 100644
--- a/drivers/scsi/mvsas/mv_init.c
+++ b/drivers/scsi/mvsas/mv_init.c
@@ -704,24 +704,7 @@ static struct pci_device_id mvs_pci_table[] = {
 		.class_mask	= 0,
 		.driver_data	= chip_9445,
 	},
-	{
-		.vendor		= PCI_VENDOR_ID_MARVELL_EXT,
-		.device		= 0x9485,
-		.subvendor	= PCI_ANY_ID,
-		.subdevice	= 0x9480,
-		.class		= 0,
-		.class_mask	= 0,
-		.driver_data	= chip_9485,
-	},
-	{
-		.vendor		= PCI_VENDOR_ID_MARVELL_EXT,
-		.device		= 0x9485,
-		.subvendor	= PCI_ANY_ID,
-		.subdevice	= 0x9485,
-		.class		= 0,
-		.class_mask	= 0,
-		.driver_data	= chip_9485,
-	},
+	{ PCI_VDEVICE(MARVELL_EXT, 0x9485), chip_9485 }, /* Marvell 9480/9485 (any vendor/model) */
 	{ PCI_VDEVICE(OCZ, 0x1021), chip_9485}, /* OCZ RevoDrive3 */
 	{ PCI_VDEVICE(OCZ, 0x1022), chip_9485}, /* OCZ RevoDrive3/zDriveR4 (exact model unknown) */
 	{ PCI_VDEVICE(OCZ, 0x1040), chip_9485}, /* OCZ RevoDrive3/zDriveR4 (exact model unknown) */
-- 
2.8.0.rc3