From: Hannes Reinecke <hare@suse.de>
To: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: James Bottomley <james.bottomley@hansenpartnership.com>,
Christoph Hellwig <hch@lst.de>,
Johannes Thumshirn <jth@kernel.org>,
linux-scsi@vger.kernel.org, Mike Snitzer <snitzer@redhat.com>,
Martin Wilck <martin.wilck@suse.com>,
Hannes Reinecke <hare@suse.de>, Hannes Reinecke <hare@suse.com>
Subject: [PATCH 09/30] libfc: Send LS_RJT responses on frame allocation
Date: Fri, 26 Aug 2016 14:01:32 +0200 [thread overview]
Message-ID: <1472212913-39810-10-git-send-email-hare@suse.de> (raw)
In-Reply-To: <1472212913-39810-1-git-send-email-hare@suse.de>
When we fail to allocate a frame we should be sending an LS_RJT
response and not just silently drop the frame altogether.
Signed-off-by: Hannes Reinecke <hare@suse.com>
---
drivers/scsi/libfc/fc_rport.c | 27 +++++++++++++++++++--------
1 file changed, 19 insertions(+), 8 deletions(-)
diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c
index 29a51c6..f9b6f59 100644
--- a/drivers/scsi/libfc/fc_rport.c
+++ b/drivers/scsi/libfc/fc_rport.c
@@ -926,8 +926,12 @@ static void fc_rport_recv_flogi_req(struct fc_lport *lport,
}
fp = fc_frame_alloc(lport, sizeof(*flp));
- if (!fp)
- goto out;
+ if (!fp) {
+ mutex_unlock(&rdata->rp_mutex);
+ rjt_data.reason = ELS_RJT_UNAB;
+ rjt_data.explan = ELS_EXPL_INSUF_RES;
+ goto reject_put;
+ }
fc_flogi_fill(lport, fp);
flp = fc_frame_payload_get(fp, sizeof(*flp));
@@ -940,7 +944,7 @@ static void fc_rport_recv_flogi_req(struct fc_lport *lport,
fc_rport_enter_plogi(rdata);
else
fc_rport_state_enter(rdata, RPORT_ST_PLOGI_WAIT);
-out:
+
mutex_unlock(&rdata->rp_mutex);
kref_put(&rdata->kref, lport->tt.rport_destroy);
fc_frame_free(rx_fp);
@@ -1503,8 +1507,12 @@ static void fc_rport_recv_adisc_req(struct fc_rport_priv *rdata,
}
fp = fc_frame_alloc(lport, sizeof(*adisc));
- if (!fp)
+ if (!fp) {
+ rjt_data.reason = ELS_RJT_UNAB;
+ rjt_data.explan = ELS_EXPL_INSUF_RES;
+ lport->tt.seq_els_rsp_send(in_fp, ELS_LS_RJT, &rjt_data);
goto drop;
+ }
fc_adisc_fill(lport, fp);
adisc = fc_frame_payload_get(fp, sizeof(*adisc));
adisc->adisc_cmd = ELS_LS_ACC;
@@ -1812,14 +1820,17 @@ static void fc_rport_recv_plogi_req(struct fc_lport *lport,
* Send LS_ACC. If this fails, the originator should retry.
*/
fp = fc_frame_alloc(lport, sizeof(*pl));
- if (!fp)
- goto out;
-
+ if (!fp) {
+ mutex_unlock(&rdata->rp_mutex);
+ rjt_data.reason = ELS_RJT_UNAB;
+ rjt_data.explan = ELS_EXPL_INSUF_RES;
+ goto reject;
+ }
fc_plogi_fill(lport, fp, ELS_LS_ACC);
fc_fill_reply_hdr(fp, rx_fp, FC_RCTL_ELS_REP, 0);
lport->tt.frame_send(lport, fp);
fc_rport_enter_prli(rdata);
-out:
+
mutex_unlock(&rdata->rp_mutex);
fc_frame_free(rx_fp);
return;
--
1.8.5.6
next prev parent reply other threads:[~2016-08-26 12:02 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-26 12:01 [PATCH 00/30] FCoE VN2VN fixes Hannes Reinecke
2016-08-26 12:01 ` [PATCH 01/30] libfc: Revisit kref handling Hannes Reinecke
2016-08-26 13:37 ` Johannes Thumshirn
2016-08-26 12:01 ` [PATCH 02/30] libfc: additional debugging messages Hannes Reinecke
2016-08-26 12:01 ` [PATCH 03/30] libfc: spurious I/O error under high load Hannes Reinecke
2016-08-26 12:01 ` [PATCH 04/30] libfc: Do not login if the port is already started Hannes Reinecke
2016-08-26 12:01 ` [PATCH 05/30] libfc: use configured lport R_A_TOV when sending Hannes Reinecke
2016-08-26 12:01 ` [PATCH 06/30] libfc: use configured e_d_tov for remote port state Hannes Reinecke
2016-08-26 12:01 ` [PATCH 07/30] libfc: do not overwrite DID_TIME_OUT status Hannes Reinecke
2016-08-26 12:01 ` [PATCH 08/30] libfc: use error code for fc_rport_error() Hannes Reinecke
2016-08-26 12:01 ` Hannes Reinecke [this message]
2016-08-26 12:01 ` [PATCH 10/30] libfc: don't advance state machine for incoming FLOGI Hannes Reinecke
2016-08-26 12:01 ` [PATCH 11/30] libfc: Fixup disc_mutex handling Hannes Reinecke
2016-08-26 12:01 ` [PATCH 12/30] libfc: Do not drop down to FLOGI for fc_rport_login() Hannes Reinecke
2016-08-26 12:01 ` [PATCH 13/30] libfc: Implement RTV responder Hannes Reinecke
2016-08-26 12:01 ` [PATCH 14/30] libfc: Rework PRLI handling Hannes Reinecke
2016-08-26 12:01 ` [PATCH 15/30] libfc: Return LS_RJT_BUSY for PRLI in status PLOGI Hannes Reinecke
2016-08-26 12:01 ` [PATCH 16/30] libfc: Clarify ramp-down messages Hannes Reinecke
2016-08-26 12:01 ` [PATCH 17/30] libfc: sanitize E_D_TOV and R_A_TOV setting Hannes Reinecke
2016-08-26 12:01 ` [PATCH 18/30] libfc: safeguard against invalid exchange index Hannes Reinecke
2016-08-26 12:01 ` [PATCH 19/30] libfc: quarantine timed out xids Hannes Reinecke
2016-08-26 12:01 ` [PATCH 20/30] libfc: don't fail sequence abort for completed Hannes Reinecke
2016-08-26 12:01 ` [PATCH 21/30] libfc: Do not drop out-of-order frames Hannes Reinecke
2016-08-26 12:01 ` [PATCH 22/30] libfc: reset timeout on queue full Hannes Reinecke
2016-08-26 12:01 ` [PATCH 23/30] libfc: wait for E_D_TOV when out-of-order sequence is received Hannes Reinecke
2016-08-26 12:01 ` [PATCH 24/30] fcoe: Use kfree_skb() instead of kfree() Hannes Reinecke
2016-08-26 12:01 ` [PATCH 25/30] fcoe: set default TC priority Hannes Reinecke
2016-08-26 12:01 ` [PATCH 26/30] fcoe: inhibit writing invalid values into the 'enabled' Hannes Reinecke
2016-08-26 12:01 ` [PATCH 27/30] fcoe: correct sending FIP VLAN packets on VLAN 0 Hannes Reinecke
2016-08-26 12:01 ` [PATCH 28/30] fcoe: FIP debugging Hannes Reinecke
2016-08-26 12:01 ` [PATCH 29/30] fcoe: filter out frames from invalid vlans Hannes Reinecke
2016-08-26 12:01 ` [PATCH 30/30] fcoe: make R_A_TOV and E_D_TOV configurable Hannes Reinecke
2016-08-26 13:48 ` [PATCH 00/30] FCoE VN2VN fixes Johannes Thumshirn
2016-08-31 2:46 ` Martin K. Petersen
2016-08-31 7:25 ` Johannes Thumshirn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1472212913-39810-10-git-send-email-hare@suse.de \
--to=hare@suse.de \
--cc=hare@suse.com \
--cc=hch@lst.de \
--cc=james.bottomley@hansenpartnership.com \
--cc=jth@kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=martin.wilck@suse.com \
--cc=snitzer@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).