From: Martin Wilck <mwilck@suse.de>
To: Don Brace <don.brace@microsemi.com>
Cc: dl-esc-Team ESD Storage Dev Support
<esc-TeamESDStorageDevSupport@microsemi.com>,
"iss_storagedev@hp.com" <iss_storagedev@hp.com>,
"linux-scsi@vger.kernel.org" <linux-scsi@vger.kernel.org>,
James Bottomley <jejb@linux.vnet.ibm.com>,
"hch@lst.de" <hch@lst.de>, "hare@suse.de" <hare@suse.de>,
jthumshirn@suse.com
Subject: Re: [PATCH 0/2] hpsa: fix rmmod issues
Date: Fri, 02 Dec 2016 09:58:58 +0100 [thread overview]
Message-ID: <1480669138.3552.23.camel@suse.de> (raw)
In-Reply-To: <4993A297653ECB4581FA5C3C31323D194180229D@avsrvexchmbx1.microsemi.net>
On Thu, 2016-12-01 at 23:22 +0000, Don Brace wrote:
> > -----Original Message-----
> > From: Martin Wilck [mailto:mwilck@suse.de]
> > Sent: Monday, November 21, 2016 8:04 AM
> > To: Don Brace
> > Cc: dl-esc-Team ESD Storage Dev Support; iss_storagedev@hp.com;
> > linux-
> > scsi@vger.kernel.org; JBottomley@odin.com; hch@lst.de; hare@suse.de
> > ;
> > Martin Wilck
> > Subject: [PATCH 0/2] hpsa: fix rmmod issues
> >
> > EXTERNAL EMAIL
> >
> >
> > This patch set fixes two issues I encountered when removing the
> > hpsa modules with rmmod.
> >
> > Comments and reviews are welcome.
> >
> > Martin Wilck (2):
> > hpsa: cleanup sas_phy structures in sysfs when unloading
> > hpsa: destroy sas transport properties before scsi_host
> >
> > drivers/scsi/hpsa.c | 4 ++--
> > 1 file changed, 2 insertions(+), 2 deletions(-)
> >
> > --
> > 2.10.1
>
> I have both patches applied and I still get stack traces.
Hm,
there must be a difference between 4.9.0 and the SUSE kernel that I
tested with, then. To be certain, you did NOT see a stack trace at
rmmod before applying my patches?
I can see that your trace occurs in a different code path
(bsg_unregister_queue()) than the ones I observed
(sas_port_delete()/sas_phy_delete()). CC'ing Johannes who alluded to a
generic problem in the SCSI stack during our internal discussion.
Anyway, I'll have another look.
Regards
Martin
>
>
>
> [252338.604903] ------------[ cut here ]------------
> [252338.627899] WARNING: CPU: 69 PID: 23977 at fs/sysfs/group.c:237
> sysfs_remove_group+0x8e/0x90
> [252338.668726] sysfs group 'power' not found for kobject '5:0:0:0'
> [252338.697526] Modules linked in: hpsa(OE-) scsi_transport_sas(OE)
> ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 nf_conntrack_ipv6
> nf_defrag_ipv6 ipt_REJECT nf_reject_ipv4 nf_conntrack_ipv4
> nf_defrag_ipv4 xt_conntrack nf_conntrack cfg80211 rfkill ebtable_nat
> ebtable_broute bridge stp llc ebtable_filter ebtables ip6table_mangle
> ip6table_security ip6table_raw ip6table_filter ip6_tables
> iptable_mangle iptable_security iptable_raw iptable_filter ip_tables
> osst ch st sb_edac edac_core x86_pkg_temp_thermal coretemp
> crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel lrw
> iTCO_wdt gf128mul glue_helper iTCO_vendor_support ablk_helper cryptd
> pcspkr ioatdma lpc_ich hpwdt hpilo mfd_core dca ipmi_si wmi
> ipmi_msghandler pcc_cpufreq acpi_cpufreq acpi_power_meter uinput
> mgag200 i2c_algo_bit drm_kms_helper syscopyarea
> [252339.038528] sysfillrect sysimgblt fb_sys_fops ttm drm
> crc32c_intel serio_raw tg3 ptp usb_storage i2c_core pps_core
> dm_mirror dm_region_hash dm_log dm_mod [last unloaded:
> scsi_transport_sas]
> [252339.113923] CPU: 69 PID: 23977 Comm: rmmod Tainted:
> G W OE 4.9.0-rc71+ #24
> [252339.151296] Hardware name: HP ProLiant DL580 Gen8, BIOS P79
> 08/18/2016
> [252339.183354] ffffc9000ff1bbf0 ffffffff815909bd ffffc9000ff1bc40
> 0000000000000000
> [252339.219046] ffffc9000ff1bc30 ffffffff81090901 000000ed00000246
> 0000000000000000
> [252339.255044] ffffffff81f71560 ffff88204584dd38 ffff882051e93670
> 0000000000ae1090
> [252339.290927] Call Trace:
> [252339.303968] [<ffffffff815909bd>] dump_stack+0x85/0xc8
> [252339.329624] [<ffffffff81090901>] __warn+0xd1/0xf0
> [252339.354037] [<ffffffff8109097f>] warn_slowpath_fmt+0x5f/0x80
> [252339.382084] [<ffffffff8196e5de>] ? mutex_unlock+0xe/0x10
> [252339.408515] [<ffffffff812f1a6a>] ?
> kernfs_find_and_get_ns+0x4a/0x60
> [252339.439571] [<ffffffff812f56ae>] sysfs_remove_group+0x8e/0x90
> [252339.468069] [<ffffffff816dd1b7>] dpm_sysfs_remove+0x57/0x60
> [252339.495701] [<ffffffff816cf928>] device_del+0x58/0x270
> [252339.521474] [<ffffffff816cfb5a>] device_unregister+0x1a/0x60
> [252339.549796] [<ffffffff8157d470>] bsg_unregister_queue+0x60/0xa0
> [252339.578999] [<ffffffff8170e2ea>] __scsi_remove_device+0xaa/0xd0
> [252339.608230] [<ffffffff8170c369>] scsi_forget_host+0x69/0x70
> [252339.635723] [<ffffffff816ff292>] scsi_remove_host+0x82/0x130
> [252339.663738] [<ffffffffa038cfc3>] hpsa_remove_one+0x93/0x190
> [hpsa]
> [252339.694960] [<ffffffff815dd8d9>] pci_device_remove+0x39/0xc0
> [252339.723128] [<ffffffff816d4aca>]
> __device_release_driver+0x9a/0x150
> [252339.753539] [<ffffffff816d4ca1>] driver_detach+0xc1/0xd0
> [252339.779784] [<ffffffff816d3a98>] bus_remove_driver+0x58/0xd0
> [252339.807519] [<ffffffff816d572c>] driver_unregister+0x2c/0x50
> [252339.835948] [<ffffffff815dbf3a>] pci_unregister_driver+0x2a/0x80
> [252339.865660] [<ffffffffa0395869>] hpsa_cleanup+0x10/0x7a7 [hpsa]
> [252339.894682] [<ffffffff8113571c>] SyS_delete_module+0x1bc/0x220
> [252339.924020] [<ffffffff81003c0c>] do_syscall_64+0x6c/0x200
> [252339.950862] [<ffffffff81971d49>]
> entry_SYSCALL64_slow_path+0x25/0x25
> [252339.982292] ---[ end trace 03cf2c42f2f658e5 ]---
next prev parent reply other threads:[~2016-12-02 8:59 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-21 14:04 [PATCH 0/2] hpsa: fix rmmod issues Martin Wilck
2016-11-21 14:04 ` [PATCH 1/2] hpsa: cleanup sas_phy structures in sysfs when unloading Martin Wilck
2016-11-21 14:13 ` Johannes Thumshirn
2016-11-21 15:13 ` Martin Wilck
2016-11-22 3:47 ` Martin K. Petersen
2016-11-22 8:10 ` Johannes Thumshirn
2016-11-29 1:52 ` Don Brace
2016-11-29 9:16 ` Martin Wilck
2016-11-21 14:04 ` [PATCH 2/2] hpsa: destroy sas transport properties before scsi_host Martin Wilck
2016-11-21 14:14 ` Johannes Thumshirn
2017-10-10 23:04 ` Don Brace
2017-10-11 9:15 ` Martin Wilck
2016-12-01 23:22 ` [PATCH 0/2] hpsa: fix rmmod issues Don Brace
2016-12-02 8:58 ` Martin Wilck [this message]
2016-12-02 15:44 ` Don Brace
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1480669138.3552.23.camel@suse.de \
--to=mwilck@suse.de \
--cc=don.brace@microsemi.com \
--cc=esc-TeamESDStorageDevSupport@microsemi.com \
--cc=hare@suse.de \
--cc=hch@lst.de \
--cc=iss_storagedev@hp.com \
--cc=jejb@linux.vnet.ibm.com \
--cc=jthumshirn@suse.com \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).