From: Subhash Jadavani <subhashj@codeaurora.org>
To: vinholikatti@gmail.com, jejb@linux.vnet.ibm.com,
martin.petersen@oracle.com
Cc: linux-scsi@vger.kernel.org,
Sahitya Tummala <stummala@codeaurora.org>,
Subhash Jadavani <subhashj@codeaurora.org>,
open list <linux-kernel@vger.kernel.org>
Subject: [PATCH v2 04/12] scsi: ufs: Add sysfs node to dynamically control clock gating
Date: Tue, 13 Dec 2016 11:49:45 -0800 [thread overview]
Message-ID: <1481658586-31891-1-git-send-email-subhashj@codeaurora.org> (raw)
From: Sahitya Tummala <stummala@codeaurora.org>
Provide an option to enable/disable clock gating during runtime.
Write 1 or 0 to "clkgate_enable" sysfs node to enable/disable
clock gating.
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org>
---
drivers/scsi/ufs/ufshcd.c | 48 ++++++++++++++++++++++++++++++++++++++++++++++-
drivers/scsi/ufs/ufshcd.h | 4 ++++
2 files changed, 51 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index f4cf66a..ccf54c1 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -1011,6 +1011,41 @@ static ssize_t ufshcd_clkgate_delay_store(struct device *dev,
return count;
}
+static ssize_t ufshcd_clkgate_enable_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct ufs_hba *hba = dev_get_drvdata(dev);
+
+ return snprintf(buf, PAGE_SIZE, "%d\n", hba->clk_gating.is_enabled);
+}
+
+static ssize_t ufshcd_clkgate_enable_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct ufs_hba *hba = dev_get_drvdata(dev);
+ unsigned long flags;
+ u32 value;
+
+ if (kstrtou32(buf, 0, &value))
+ return -EINVAL;
+
+ value = !!value;
+ if (value == hba->clk_gating.is_enabled)
+ goto out;
+
+ if (value) {
+ ufshcd_release(hba);
+ } else {
+ spin_lock_irqsave(hba->host->host_lock, flags);
+ hba->clk_gating.active_reqs++;
+ spin_unlock_irqrestore(hba->host->host_lock, flags);
+ }
+
+ hba->clk_gating.is_enabled = value;
+out:
+ return count;
+}
+
static void ufshcd_init_clk_gating(struct ufs_hba *hba)
{
if (!ufshcd_is_clkgating_allowed(hba))
@@ -1020,13 +1055,23 @@ static void ufshcd_init_clk_gating(struct ufs_hba *hba)
INIT_DELAYED_WORK(&hba->clk_gating.gate_work, ufshcd_gate_work);
INIT_WORK(&hba->clk_gating.ungate_work, ufshcd_ungate_work);
+ hba->clk_gating.is_enabled = true;
+
hba->clk_gating.delay_attr.show = ufshcd_clkgate_delay_show;
hba->clk_gating.delay_attr.store = ufshcd_clkgate_delay_store;
sysfs_attr_init(&hba->clk_gating.delay_attr.attr);
hba->clk_gating.delay_attr.attr.name = "clkgate_delay_ms";
- hba->clk_gating.delay_attr.attr.mode = S_IRUGO | S_IWUSR;
+ hba->clk_gating.delay_attr.attr.mode = 0644;
if (device_create_file(hba->dev, &hba->clk_gating.delay_attr))
dev_err(hba->dev, "Failed to create sysfs for clkgate_delay\n");
+
+ hba->clk_gating.enable_attr.show = ufshcd_clkgate_enable_show;
+ hba->clk_gating.enable_attr.store = ufshcd_clkgate_enable_store;
+ sysfs_attr_init(&hba->clk_gating.enable_attr.attr);
+ hba->clk_gating.enable_attr.attr.name = "clkgate_enable";
+ hba->clk_gating.enable_attr.attr.mode = 0644;
+ if (device_create_file(hba->dev, &hba->clk_gating.enable_attr))
+ dev_err(hba->dev, "Failed to create sysfs for clkgate_enable\n");
}
static void ufshcd_exit_clk_gating(struct ufs_hba *hba)
@@ -1034,6 +1079,7 @@ static void ufshcd_exit_clk_gating(struct ufs_hba *hba)
if (!ufshcd_is_clkgating_allowed(hba))
return;
device_remove_file(hba->dev, &hba->clk_gating.delay_attr);
+ device_remove_file(hba->dev, &hba->clk_gating.enable_attr);
cancel_work_sync(&hba->clk_gating.ungate_work);
cancel_delayed_work_sync(&hba->clk_gating.gate_work);
}
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index 08cd26e..0882ba6 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -320,6 +320,8 @@ enum clk_gating_state {
* @is_suspended: clk gating is suspended when set to 1 which can be used
* during suspend/resume
* @delay_attr: sysfs attribute to control delay_attr
+ * @enable_attr: sysfs attribute to enable/disable clock gating
+ * @is_enabled: Indicates the current status of clock gating
* @active_reqs: number of requests that are pending and should be waited for
* completion before gating clocks.
*/
@@ -330,6 +332,8 @@ struct ufs_clk_gating {
unsigned long delay_ms;
bool is_suspended;
struct device_attribute delay_attr;
+ struct device_attribute enable_attr;
+ bool is_enabled;
int active_reqs;
};
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
reply other threads:[~2016-12-13 19:49 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1481658586-31891-1-git-send-email-subhashj@codeaurora.org \
--to=subhashj@codeaurora.org \
--cc=jejb@linux.vnet.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=stummala@codeaurora.org \
--cc=vinholikatti@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).