* [PATCH 01/19] aacraid: Remove GFP_DMA for raw srb memory
2017-05-07 13:34 [PATCH 00/19] aacraid: Patchset with reset rework and misc fixes Raghava Aditya Renukunta
@ 2017-05-07 13:34 ` Raghava Aditya Renukunta
2017-05-07 13:34 ` [PATCH 02/19] aacraid: Fix DMAR issues with iommu=pt Raghava Aditya Renukunta
` (18 subsequent siblings)
19 siblings, 0 replies; 22+ messages in thread
From: Raghava Aditya Renukunta @ 2017-05-07 13:34 UTC (permalink / raw)
To: jejb, martin.petersen, linux-scsi
Cc: David.Carroll, Gana.Sridaran, Scott.Benesh, Prasad.Munirathnam
The raw srb commands do not requires memory that in the ZONE_DMA
memory space. For 32bit srb commands use __GFP_DMA32 to limit the memory
to 32bit memory range (4GB).
Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
---
drivers/scsi/aacraid/commctrl.c | 13 ++++++-------
1 file changed, 6 insertions(+), 7 deletions(-)
diff --git a/drivers/scsi/aacraid/commctrl.c b/drivers/scsi/aacraid/commctrl.c
index d2f8d59..da01f9c 100644
--- a/drivers/scsi/aacraid/commctrl.c
+++ b/drivers/scsi/aacraid/commctrl.c
@@ -668,7 +668,7 @@ static int aac_send_raw_srb(struct aac_dev* dev, void __user * arg)
goto cleanup;
}
- p = kmalloc(sg_count[i], GFP_KERNEL|__GFP_DMA);
+ p = kmalloc(sg_count[i], GFP_KERNEL);
if (!p) {
rcode = -ENOMEM;
goto cleanup;
@@ -733,7 +733,7 @@ static int aac_send_raw_srb(struct aac_dev* dev, void __user * arg)
goto cleanup;
}
/* Does this really need to be GFP_DMA? */
- p = kmalloc(sg_count[i], GFP_KERNEL|__GFP_DMA);
+ p = kmalloc(sg_count[i], GFP_KERNEL);
if(!p) {
dprintk((KERN_DEBUG"aacraid: Could not allocate SG buffer - size = %d buffer number %d of %d\n",
sg_count[i], i, upsg->count));
@@ -788,8 +788,8 @@ static int aac_send_raw_srb(struct aac_dev* dev, void __user * arg)
rcode = -EINVAL;
goto cleanup;
}
- /* Does this really need to be GFP_DMA? */
- p = kmalloc(sg_count[i], GFP_KERNEL|__GFP_DMA);
+
+ p = kmalloc(sg_count[i], GFP_KERNEL);
if(!p) {
dprintk((KERN_DEBUG "aacraid: Could not allocate SG buffer - size = %d buffer number %d of %d\n",
sg_count[i], i, usg->count));
@@ -845,8 +845,7 @@ static int aac_send_raw_srb(struct aac_dev* dev, void __user * arg)
rcode = -EINVAL;
goto cleanup;
}
- /* Does this really need to be GFP_DMA? */
- p = kmalloc(sg_count[i], GFP_KERNEL|__GFP_DMA);
+ p = kmalloc(sg_count[i], GFP_KERNEL|GFP_DMA32);
if (!p) {
dprintk((KERN_DEBUG"aacraid: Could not allocate SG buffer - size = %d buffer number %d of %d\n",
sg_count[i], i, usg->count));
@@ -887,7 +886,7 @@ static int aac_send_raw_srb(struct aac_dev* dev, void __user * arg)
rcode = -EINVAL;
goto cleanup;
}
- p = kmalloc(sg_count[i], GFP_KERNEL);
+ p = kmalloc(sg_count[i], GFP_KERNEL|GFP_DMA32);
if (!p) {
dprintk((KERN_DEBUG"aacraid: Could not allocate SG buffer - size = %d buffer number %d of %d\n",
sg_count[i], i, upsg->count));
--
2.7.4
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH 02/19] aacraid: Fix DMAR issues with iommu=pt
2017-05-07 13:34 [PATCH 00/19] aacraid: Patchset with reset rework and misc fixes Raghava Aditya Renukunta
2017-05-07 13:34 ` [PATCH 01/19] aacraid: Remove GFP_DMA for raw srb memory Raghava Aditya Renukunta
@ 2017-05-07 13:34 ` Raghava Aditya Renukunta
2017-05-07 13:34 ` [PATCH 03/19] aacraid: Added 32 and 64 queue depth for arc natives Raghava Aditya Renukunta
` (17 subsequent siblings)
19 siblings, 0 replies; 22+ messages in thread
From: Raghava Aditya Renukunta @ 2017-05-07 13:34 UTC (permalink / raw)
To: jejb, martin.petersen, linux-scsi
Cc: David.Carroll, Gana.Sridaran, Scott.Benesh, Prasad.Munirathnam
The driver changed the DMA consistent map after consistent memory was
allocated, this invalidated the IOMMU identity mapping. The fix was to
make sure that we set the DMA consistent mask setting once depending on
the controller card.
Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
---
drivers/scsi/aacraid/aachba.c | 17 ++++++-----------
drivers/scsi/aacraid/commsup.c | 29 ++++++++++++++++++-----------
drivers/scsi/aacraid/linit.c | 32 +++++++++++++++++++-------------
3 files changed, 43 insertions(+), 35 deletions(-)
diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c
index 43d8838..707ee2f 100644
--- a/drivers/scsi/aacraid/aachba.c
+++ b/drivers/scsi/aacraid/aachba.c
@@ -2071,20 +2071,15 @@ int aac_get_adapter_info(struct aac_dev* dev)
expose_physicals = 0;
}
- if(dev->dac_support != 0) {
- if (!pci_set_dma_mask(dev->pdev, DMA_BIT_MASK(64)) &&
- !pci_set_consistent_dma_mask(dev->pdev, DMA_BIT_MASK(64))) {
+ if (dev->dac_support) {
+ if (!pci_set_dma_mask(dev->pdev, DMA_BIT_MASK(64))) {
if (!dev->in_reset)
- printk(KERN_INFO"%s%d: 64 Bit DAC enabled\n",
- dev->name, dev->id);
- } else if (!pci_set_dma_mask(dev->pdev, DMA_BIT_MASK(32)) &&
- !pci_set_consistent_dma_mask(dev->pdev, DMA_BIT_MASK(32))) {
- printk(KERN_INFO"%s%d: DMA mask set failed, 64 Bit DAC disabled\n",
- dev->name, dev->id);
+ dev_info(&dev->pdev->dev, "64 Bit DAC enabled\n");
+ } else if (!pci_set_dma_mask(dev->pdev, DMA_BIT_MASK(32))) {
+ dev_info(&dev->pdev->dev, "DMA mask set failed, 64 Bit DAC disabled\n");
dev->dac_support = 0;
} else {
- printk(KERN_WARNING"%s%d: No suitable DMA available.\n",
- dev->name, dev->id);
+ dev_info(&dev->pdev->dev, "No suitable DMA available\n");
rcode = -ENOMEM;
}
}
diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c
index d08920d..47068b2 100644
--- a/drivers/scsi/aacraid/commsup.c
+++ b/drivers/scsi/aacraid/commsup.c
@@ -1513,6 +1513,7 @@ static int _aac_reset_adapter(struct aac_dev *aac, int forced, u8 reset_type)
struct scsi_cmnd *command_list;
int jafo = 0;
int bled;
+ u64 dmamask;
/*
* Assumptions:
@@ -1580,21 +1581,27 @@ static int _aac_reset_adapter(struct aac_dev *aac, int forced, u8 reset_type)
aac_free_irq(aac);
kfree(aac->fsa_dev);
aac->fsa_dev = NULL;
+
+ dmamask = DMA_BIT_MASK(32);
quirks = aac_get_driver_ident(index)->quirks;
- if (quirks & AAC_QUIRK_31BIT) {
- if (((retval = pci_set_dma_mask(aac->pdev, DMA_BIT_MASK(31)))) ||
- ((retval = pci_set_consistent_dma_mask(aac->pdev, DMA_BIT_MASK(31)))))
- goto out;
- } else {
- if (((retval = pci_set_dma_mask(aac->pdev, DMA_BIT_MASK(32)))) ||
- ((retval = pci_set_consistent_dma_mask(aac->pdev, DMA_BIT_MASK(32)))))
- goto out;
+ if (quirks & AAC_QUIRK_31BIT)
+ retval = pci_set_dma_mask(aac->pdev, dmamask);
+ else if (!(quirks & AAC_QUIRK_SRC))
+ retval = pci_set_dma_mask(aac->pdev, dmamask);
+ else
+ retval = pci_set_consistent_dma_mask(aac->pdev, dmamask);
+
+ if (quirks & AAC_QUIRK_31BIT && !retval) {
+ dmamask = DMA_BIT_MASK(31);
+ retval = pci_set_consistent_dma_mask(aac->pdev, dmamask);
}
+
+ if (retval)
+ goto out;
+
if ((retval = (*(aac_get_driver_ident(index)->init))(aac)))
goto out;
- if (quirks & AAC_QUIRK_31BIT)
- if ((retval = pci_set_dma_mask(aac->pdev, DMA_BIT_MASK(32))))
- goto out;
+
if (jafo) {
aac->thread = kthread_run(aac_command_thread, aac, "%s",
aac->name);
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index 372a075..5a201da 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -1403,6 +1403,7 @@ static int aac_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
int error = -ENODEV;
int unique_id = 0;
u64 dmamask;
+ int mask_bits = 0;
extern int aac_sync_mode;
/*
@@ -1426,18 +1427,32 @@ static int aac_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
goto out;
error = -ENODEV;
+ if (!(aac_drivers[index].quirks & AAC_QUIRK_SRC)) {
+ error = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (error) {
+ dev_err(&pdev->dev, "PCI 32 BIT dma mask set failed");
+ goto out_disable_pdev;
+ }
+ }
+
/*
* If the quirk31 bit is set, the adapter needs adapter
* to driver communication memory to be allocated below 2gig
*/
- if (aac_drivers[index].quirks & AAC_QUIRK_31BIT)
+ if (aac_drivers[index].quirks & AAC_QUIRK_31BIT) {
dmamask = DMA_BIT_MASK(31);
- else
+ mask_bits = 31;
+ } else {
dmamask = DMA_BIT_MASK(32);
+ mask_bits = 32;
+ }
- if (pci_set_dma_mask(pdev, dmamask) ||
- pci_set_consistent_dma_mask(pdev, dmamask))
+ error = pci_set_consistent_dma_mask(pdev, dmamask);
+ if (error) {
+ dev_err(&pdev->dev, "PCI %d B consistent dma mask set failed\n"
+ , mask_bits);
goto out_disable_pdev;
+ }
pci_set_master(pdev);
@@ -1501,15 +1516,6 @@ static int aac_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
goto out_deinit;
}
- /*
- * If we had set a smaller DMA mask earlier, set it to 4gig
- * now since the adapter can dma data to at least a 4gig
- * address space.
- */
- if (aac_drivers[index].quirks & AAC_QUIRK_31BIT)
- if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)))
- goto out_deinit;
-
aac->maximum_num_channels = aac_drivers[index].channels;
error = aac_get_adapter_info(aac);
if (error < 0)
--
2.7.4
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH 03/19] aacraid: Added 32 and 64 queue depth for arc natives
2017-05-07 13:34 [PATCH 00/19] aacraid: Patchset with reset rework and misc fixes Raghava Aditya Renukunta
2017-05-07 13:34 ` [PATCH 01/19] aacraid: Remove GFP_DMA for raw srb memory Raghava Aditya Renukunta
2017-05-07 13:34 ` [PATCH 02/19] aacraid: Fix DMAR issues with iommu=pt Raghava Aditya Renukunta
@ 2017-05-07 13:34 ` Raghava Aditya Renukunta
2017-05-07 13:34 ` [PATCH 04/19] aacraid: Set correct Queue Depth for HBA1000 RAW disks Raghava Aditya Renukunta
` (16 subsequent siblings)
19 siblings, 0 replies; 22+ messages in thread
From: Raghava Aditya Renukunta @ 2017-05-07 13:34 UTC (permalink / raw)
To: jejb, martin.petersen, linux-scsi
Cc: David.Carroll, Gana.Sridaran, Scott.Benesh, Prasad.Munirathnam
The qd for ARC Native disks is calculated by dividing the max IO 1024
by the number of disks or 256 which ever is lower. This causes poor
disk IO performance.
The fix is set the qd based on the type of disk (SAS - 64 and SATA -
32).
Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
---
drivers/scsi/aacraid/aacraid.h | 1 +
drivers/scsi/aacraid/linit.c | 11 +++++++++++
2 files changed, 12 insertions(+)
diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
index d036a80..3ede6de 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -415,6 +415,7 @@ struct aac_ciss_identify_pd {
* These macros convert from physical channels to virtual channels
*/
#define CONTAINER_CHANNEL (0)
+#define NATIVE_CHANNEL (1)
#define CONTAINER_TO_CHANNEL(cont) (CONTAINER_CHANNEL)
#define CONTAINER_TO_ID(cont) (cont)
#define CONTAINER_TO_LUN(cont) (0)
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index 5a201da..5e1a2d6 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -466,6 +466,17 @@ static int aac_slave_configure(struct scsi_device *sdev)
++num_lsu;
depth = (host->can_queue - num_one) / num_lsu;
+
+ if (sdev_channel(sdev) != NATIVE_CHANNEL)
+ goto common_config;
+
+ /*
+ * Check if SATA drive
+ */
+ if (strncmp(sdev->vendor, "ATA", 3) == 0)
+ depth = 32;
+ else
+ depth = 64;
}
common_config:
--
2.7.4
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH 04/19] aacraid: Set correct Queue Depth for HBA1000 RAW disks
2017-05-07 13:34 [PATCH 00/19] aacraid: Patchset with reset rework and misc fixes Raghava Aditya Renukunta
` (2 preceding siblings ...)
2017-05-07 13:34 ` [PATCH 03/19] aacraid: Added 32 and 64 queue depth for arc natives Raghava Aditya Renukunta
@ 2017-05-07 13:34 ` Raghava Aditya Renukunta
2017-05-07 13:34 ` [PATCH 05/19] aacraid: Remove reset support from check_health Raghava Aditya Renukunta
` (15 subsequent siblings)
19 siblings, 0 replies; 22+ messages in thread
From: Raghava Aditya Renukunta @ 2017-05-07 13:34 UTC (permalink / raw)
To: jejb, martin.petersen, linux-scsi
Cc: David.Carroll, Gana.Sridaran, Scott.Benesh, Prasad.Munirathnam
The default queue depth for non NATIVE RAW disks is calculated from the
number of fibs and number of disks or a max of 256. This causes poor disk
IO performance.
The fix is to set default qd based on the type of disks
(SATA -32 and SAS -64)
Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
---
drivers/scsi/aacraid/linit.c | 28 ++++++++++++++++++++--------
1 file changed, 20 insertions(+), 8 deletions(-)
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index 5e1a2d6..9ef98e4 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -405,17 +405,23 @@ static int aac_slave_configure(struct scsi_device *sdev)
int chn, tid;
unsigned int depth = 0;
unsigned int set_timeout = 0;
+ bool set_qd_dev_type = false;
+ u8 devtype = 0;
chn = aac_logical_to_phys(sdev_channel(sdev));
tid = sdev_id(sdev);
- if (chn < AAC_MAX_BUSES && tid < AAC_MAX_TARGETS &&
- aac->hba_map[chn][tid].devtype == AAC_DEVTYPE_NATIVE_RAW) {
- depth = aac->hba_map[chn][tid].qd_limit;
+ if (chn < AAC_MAX_BUSES && tid < AAC_MAX_TARGETS && aac->sa_firmware) {
+ devtype = aac->hba_map[chn][tid].devtype;
+
+ if (devtype == AAC_DEVTYPE_NATIVE_RAW)
+ depth = aac->hba_map[chn][tid].qd_limit;
+ else if (devtype == AAC_DEVTYPE_ARC_RAW)
+ set_qd_dev_type = true;
+
set_timeout = 1;
goto common_config;
}
-
if (aac->jbod && (sdev->type == TYPE_DISK))
sdev->removable = 1;
@@ -470,16 +476,22 @@ static int aac_slave_configure(struct scsi_device *sdev)
if (sdev_channel(sdev) != NATIVE_CHANNEL)
goto common_config;
- /*
- * Check if SATA drive
- */
+ set_qd_dev_type = true;
+
+ }
+
+common_config:
+
+ /*
+ * Check if SATA drive
+ */
+ if (set_qd_dev_type) {
if (strncmp(sdev->vendor, "ATA", 3) == 0)
depth = 32;
else
depth = 64;
}
-common_config:
/*
* Firmware has an individual device recovery time typically
* of 35 seconds, give us a margin.
--
2.7.4
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH 05/19] aacraid: Remove reset support from check_health
2017-05-07 13:34 [PATCH 00/19] aacraid: Patchset with reset rework and misc fixes Raghava Aditya Renukunta
` (3 preceding siblings ...)
2017-05-07 13:34 ` [PATCH 04/19] aacraid: Set correct Queue Depth for HBA1000 RAW disks Raghava Aditya Renukunta
@ 2017-05-07 13:34 ` Raghava Aditya Renukunta
2017-05-07 13:34 ` [PATCH 06/19] aacraid: Change wait time for fib completion Raghava Aditya Renukunta
` (14 subsequent siblings)
19 siblings, 0 replies; 22+ messages in thread
From: Raghava Aditya Renukunta @ 2017-05-07 13:34 UTC (permalink / raw)
To: jejb, martin.petersen, linux-scsi
Cc: David.Carroll, Gana.Sridaran, Scott.Benesh, Prasad.Munirathnam
Check health does not need to reset the ctrl but just return the
controller health status.
Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
---
drivers/scsi/aacraid/commsup.c | 15 ---------------
1 file changed, 15 deletions(-)
diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c
index 47068b2..3299012 100644
--- a/drivers/scsi/aacraid/commsup.c
+++ b/drivers/scsi/aacraid/commsup.c
@@ -1775,8 +1775,6 @@ int aac_check_health(struct aac_dev * aac)
int BlinkLED;
unsigned long time_now, flagv = 0;
struct list_head * entry;
- struct Scsi_Host * host;
- int bled;
/* Extending the scope of fib_lock slightly to protect aac->in_reset */
if (spin_trylock_irqsave(&aac->fib_lock, flagv) == 0)
@@ -1887,19 +1885,6 @@ int aac_check_health(struct aac_dev * aac)
printk(KERN_ERR "%s: Host adapter BLINK LED 0x%x\n", aac->name, BlinkLED);
- if (!aac_check_reset || ((aac_check_reset == 1) &&
- (aac->supplement_adapter_info.supported_options2 &
- AAC_OPTION_IGNORE_RESET)))
- goto out;
- host = aac->scsi_host_ptr;
- if (aac->thread->pid != current->pid)
- spin_lock_irqsave(host->host_lock, flagv);
- bled = aac_check_reset != 1 ? 1 : 0;
- _aac_reset_adapter(aac, bled, IOP_HWSOFT_RESET);
- if (aac->thread->pid != current->pid)
- spin_unlock_irqrestore(host->host_lock, flagv);
- return BlinkLED;
-
out:
aac->in_reset = 0;
return BlinkLED;
--
2.7.4
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH 06/19] aacraid: Change wait time for fib completion
2017-05-07 13:34 [PATCH 00/19] aacraid: Patchset with reset rework and misc fixes Raghava Aditya Renukunta
` (4 preceding siblings ...)
2017-05-07 13:34 ` [PATCH 05/19] aacraid: Remove reset support from check_health Raghava Aditya Renukunta
@ 2017-05-07 13:34 ` Raghava Aditya Renukunta
2017-05-07 13:34 ` [PATCH 07/19] aacraid: Log count info of scsi cmds before reset Raghava Aditya Renukunta
` (13 subsequent siblings)
19 siblings, 0 replies; 22+ messages in thread
From: Raghava Aditya Renukunta @ 2017-05-07 13:34 UTC (permalink / raw)
To: jejb, martin.petersen, linux-scsi
Cc: David.Carroll, Gana.Sridaran, Scott.Benesh, Prasad.Munirathnam
Change the completion wait time for the fibs in the reset and abort
callback from 2 minutes to 15 seconds.
2 minutes is too long for waiting for completion.
Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
---
drivers/scsi/aacraid/linit.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index 9ef98e4..f6a11af 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -684,8 +684,8 @@ static int aac_eh_abort(struct scsi_cmnd* cmd)
(fib_callback) aac_hba_callback,
(void *) cmd);
- /* Wait up to 2 minutes for completion */
- for (count = 0; count < 120; ++count) {
+ /* Wait up to 15 secs for completion */
+ for (count = 0; count < 15; ++count) {
if (cmd->SCp.sent_command) {
ret = SUCCESS;
break;
@@ -840,8 +840,8 @@ static int aac_eh_reset(struct scsi_cmnd* cmd)
(fib_callback) aac_hba_callback,
(void *) cmd);
- /* Wait up to 2 minutes for completion */
- for (count = 0; count < 120; ++count) {
+ /* Wait up to 15 seconds for completion */
+ for (count = 0; count < 15; ++count) {
if (cmd->SCp.sent_command) {
ret = SUCCESS;
break;
--
2.7.4
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH 07/19] aacraid: Log count info of scsi cmds before reset
2017-05-07 13:34 [PATCH 00/19] aacraid: Patchset with reset rework and misc fixes Raghava Aditya Renukunta
` (5 preceding siblings ...)
2017-05-07 13:34 ` [PATCH 06/19] aacraid: Change wait time for fib completion Raghava Aditya Renukunta
@ 2017-05-07 13:34 ` Raghava Aditya Renukunta
2017-05-07 13:34 ` [PATCH 08/19] aacraid: Print ctrl status before eh reset Raghava Aditya Renukunta
` (12 subsequent siblings)
19 siblings, 0 replies; 22+ messages in thread
From: Raghava Aditya Renukunta @ 2017-05-07 13:34 UTC (permalink / raw)
To: jejb, martin.petersen, linux-scsi
Cc: David.Carroll, Gana.Sridaran, Scott.Benesh, Prasad.Munirathnam
Log the location of the scsi cmds before triggering a reset. This
information is useful for debugging.
Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
---
drivers/scsi/aacraid/linit.c | 90 ++++++++++++++++++++++++++------------------
1 file changed, 53 insertions(+), 37 deletions(-)
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index f6a11af..0a8d303 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -624,6 +624,56 @@ static int aac_ioctl(struct scsi_device *sdev, int cmd, void __user * arg)
return aac_do_ioctl(dev, cmd, arg);
}
+static int get_num_of_incomplete_fibs(struct aac_dev *aac)
+{
+
+ unsigned long flags;
+ struct scsi_device *sdev = NULL;
+ struct Scsi_Host *shost = aac->scsi_host_ptr;
+ struct scsi_cmnd *scmnd = NULL;
+ struct device *ctrl_dev;
+
+ int mlcnt = 0;
+ int llcnt = 0;
+ int ehcnt = 0;
+ int fwcnt = 0;
+ int krlcnt = 0;
+
+ __shost_for_each_device(sdev, shost) {
+ spin_lock_irqsave(&sdev->list_lock, flags);
+ list_for_each_entry(scmnd, &sdev->cmd_list, list) {
+ switch (scmnd->SCp.phase) {
+ case AAC_OWNER_FIRMWARE:
+ fwcnt++;
+ break;
+ case AAC_OWNER_ERROR_HANDLER:
+ ehcnt++;
+ break;
+ case AAC_OWNER_LOWLEVEL:
+ llcnt++;
+ break;
+ case AAC_OWNER_MIDLEVEL:
+ mlcnt++;
+ break;
+ default:
+ krlcnt++;
+ break;
+ }
+ }
+ spin_unlock_irqrestore(&sdev->list_lock, flags);
+ }
+
+ ctrl_dev = &aac->pdev->dev;
+
+ dev_info(ctrl_dev, "outstanding cmd: midlevel-%d\n", mlcnt);
+ dev_info(ctrl_dev, "outstanding cmd: lowlevel-%d\n", llcnt);
+ dev_info(ctrl_dev, "outstanding cmd: error handler-%d\n", ehcnt);
+ dev_info(ctrl_dev, "outstanding cmd: firmware-%d\n", fwcnt);
+ dev_info(ctrl_dev, "outstanding cmd: kernel-%d\n", krlcnt);
+
+ return mlcnt + llcnt + ehcnt + fwcnt;
+}
+
static int aac_eh_abort(struct scsi_cmnd* cmd)
{
struct scsi_device * dev = cmd->device;
@@ -853,8 +903,6 @@ static int aac_eh_reset(struct scsi_cmnd* cmd)
pr_err("%s: Host adapter reset request timed out\n",
AAC_DRIVERNAME);
} else {
- struct scsi_cmnd *command;
- unsigned long flags;
/* Mark the assoc. FIB to not complete, eh handler does this */
for (count = 0;
@@ -873,41 +921,9 @@ static int aac_eh_reset(struct scsi_cmnd* cmd)
pr_err("%s: Host adapter reset request. SCSI hang ?\n",
AAC_DRIVERNAME);
- count = aac_check_health(aac);
- if (count)
- return count;
- /*
- * Wait for all commands to complete to this specific
- * target (block maximum 60 seconds).
- */
- for (count = 60; count; --count) {
- int active = aac->in_reset;
-
- if (active == 0)
- __shost_for_each_device(dev, host) {
- spin_lock_irqsave(&dev->list_lock, flags);
- list_for_each_entry(command, &dev->cmd_list,
- list) {
- if ((command != cmd) &&
- (command->SCp.phase ==
- AAC_OWNER_FIRMWARE)) {
- active++;
- break;
- }
- }
- spin_unlock_irqrestore(&dev->list_lock, flags);
- if (active)
- break;
-
- }
- /*
- * We can exit If all the commands are complete
- */
- if (active == 0)
- return SUCCESS;
- ssleep(1);
- }
- pr_err("%s: SCSI bus appears hung\n", AAC_DRIVERNAME);
+ count = get_num_of_incomplete_fibs(aac);
+ if (count == 0)
+ return SUCCESS;
/*
* This adapter needs a blind reset, only do so for
--
2.7.4
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH 08/19] aacraid: Print ctrl status before eh reset
2017-05-07 13:34 [PATCH 00/19] aacraid: Patchset with reset rework and misc fixes Raghava Aditya Renukunta
` (6 preceding siblings ...)
2017-05-07 13:34 ` [PATCH 07/19] aacraid: Log count info of scsi cmds before reset Raghava Aditya Renukunta
@ 2017-05-07 13:34 ` Raghava Aditya Renukunta
2017-05-07 13:34 ` [PATCH 09/19] aacraid: Using single reset mask for IOP reset Raghava Aditya Renukunta
` (11 subsequent siblings)
19 siblings, 0 replies; 22+ messages in thread
From: Raghava Aditya Renukunta @ 2017-05-07 13:34 UTC (permalink / raw)
To: jejb, martin.petersen, linux-scsi
Cc: David.Carroll, Gana.Sridaran, Scott.Benesh, Prasad.Munirathnam
Log the status of the controller before issuing a reset.
Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
---
drivers/scsi/aacraid/linit.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index 0a8d303..3dea438 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -827,6 +827,7 @@ static int aac_eh_reset(struct scsi_cmnd* cmd)
int count;
u32 bus, cid;
int ret = FAILED;
+ int status = 0;
bus = aac_logical_to_phys(scmd_channel(cmd));
cid = scmd_id(cmd);
@@ -921,6 +922,14 @@ static int aac_eh_reset(struct scsi_cmnd* cmd)
pr_err("%s: Host adapter reset request. SCSI hang ?\n",
AAC_DRIVERNAME);
+ /*
+ * Check the health of the controller
+ */
+ status = aac_adapter_check_health(aac);
+ if (status)
+ dev_err(&aac->pdev->dev, "Adapter health - %d\n",
+ status);
+
count = get_num_of_incomplete_fibs(aac);
if (count == 0)
return SUCCESS;
--
2.7.4
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH 09/19] aacraid: Using single reset mask for IOP reset
2017-05-07 13:34 [PATCH 00/19] aacraid: Patchset with reset rework and misc fixes Raghava Aditya Renukunta
` (7 preceding siblings ...)
2017-05-07 13:34 ` [PATCH 08/19] aacraid: Print ctrl status before eh reset Raghava Aditya Renukunta
@ 2017-05-07 13:34 ` Raghava Aditya Renukunta
2017-05-07 13:34 ` [PATCH 10/19] aacraid: Rework " Raghava Aditya Renukunta
` (10 subsequent siblings)
19 siblings, 0 replies; 22+ messages in thread
From: Raghava Aditya Renukunta @ 2017-05-07 13:34 UTC (permalink / raw)
To: jejb, martin.petersen, linux-scsi
Cc: David.Carroll, Gana.Sridaran, Scott.Benesh, Prasad.Munirathnam
The driver can now trigger IOP reset with a single reset mask. Removed
code that retrieves a reset_mask from the firmware.
Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
---
drivers/scsi/aacraid/aacraid.h | 5 ++++-
drivers/scsi/aacraid/src.c | 16 ++--------------
2 files changed, 6 insertions(+), 15 deletions(-)
diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
index 3ede6de..993f134 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -2381,6 +2381,7 @@ struct revision
#define SOFT_RESET_TIME 60
+
struct aac_common
{
/*
@@ -2491,7 +2492,9 @@ struct aac_hba_info {
#define IOP_RESET_FW_FIB_DUMP 0x00000034
#define IOP_RESET 0x00001000
#define IOP_RESET_ALWAYS 0x00001001
-#define RE_INIT_ADAPTER 0x000000ee
+#define RE_INIT_ADAPTER 0x000000ee
+
+#define IOP_SRC_RESET_MASK 0x00000100
/*
* Adapter Status Register
diff --git a/drivers/scsi/aacraid/src.c b/drivers/scsi/aacraid/src.c
index 2e5338d..c0e5242 100644
--- a/drivers/scsi/aacraid/src.c
+++ b/drivers/scsi/aacraid/src.c
@@ -704,22 +704,10 @@ static void aac_send_iop_reset(struct aac_dev *dev, int bled)
0, 0, 0, 0, 0, 0, &var,
&reset_mask, NULL, NULL, NULL);
- if ((bled || var != 0x00000001) && !dev->doorbell_mask)
- bled = -EINVAL;
- else if (dev->doorbell_mask) {
- reset_mask = dev->doorbell_mask;
- bled = 0;
- var = 0x00000001;
- }
-
aac_set_intx_mode(dev);
- if (!bled && (dev->supplement_adapter_info.supported_options2 &
- AAC_OPTION_DOORBELL_RESET)) {
- src_writel(dev, MUnit.IDR, reset_mask);
- } else {
- src_writel(dev, MUnit.IDR, 0x100);
- }
+ src_writel(dev, MUnit.IDR, IOP_SRC_RESET_MASK);
+
msleep(30000);
}
--
2.7.4
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH 10/19] aacraid: Rework IOP reset
2017-05-07 13:34 [PATCH 00/19] aacraid: Patchset with reset rework and misc fixes Raghava Aditya Renukunta
` (8 preceding siblings ...)
2017-05-07 13:34 ` [PATCH 09/19] aacraid: Using single reset mask for IOP reset Raghava Aditya Renukunta
@ 2017-05-07 13:34 ` Raghava Aditya Renukunta
2017-05-07 13:34 ` [PATCH 11/19] aacraid: Add periodic checks to see IOP reset status Raghava Aditya Renukunta
` (9 subsequent siblings)
19 siblings, 0 replies; 22+ messages in thread
From: Raghava Aditya Renukunta @ 2017-05-07 13:34 UTC (permalink / raw)
To: jejb, martin.petersen, linux-scsi
Cc: David.Carroll, Gana.Sridaran, Scott.Benesh, Prasad.Munirathnam
Reworked IOP reset to remove unneeded variable and created a helper
function to notify fw of an imminent IOP reset.
Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
---
drivers/scsi/aacraid/src.c | 16 +++++++++-------
1 file changed, 9 insertions(+), 7 deletions(-)
diff --git a/drivers/scsi/aacraid/src.c b/drivers/scsi/aacraid/src.c
index c0e5242..e8e9178 100644
--- a/drivers/scsi/aacraid/src.c
+++ b/drivers/scsi/aacraid/src.c
@@ -694,15 +694,17 @@ static void aac_dump_fw_fib_iop_reset(struct aac_dev *dev)
0, 0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL);
}
-static void aac_send_iop_reset(struct aac_dev *dev, int bled)
+static void aac_notify_fw_of_iop_reset(struct aac_dev *dev)
{
- u32 var, reset_mask;
+ aac_adapter_sync_cmd(dev, IOP_RESET_ALWAYS, 0, 0, 0, 0, 0, 0, NULL,
+ NULL, NULL, NULL, NULL);
+}
+static void aac_send_iop_reset(struct aac_dev *dev)
+{
aac_dump_fw_fib_iop_reset(dev);
- bled = aac_adapter_sync_cmd(dev, IOP_RESET_ALWAYS,
- 0, 0, 0, 0, 0, 0, &var,
- &reset_mask, NULL, NULL, NULL);
+ aac_notify_fw_of_iop_reset(dev);
aac_set_intx_mode(dev);
@@ -742,7 +744,7 @@ static int aac_src_restart_adapter(struct aac_dev *dev, int bled, u8 reset_type)
switch (reset_type) {
case IOP_HWSOFT_RESET:
- aac_send_iop_reset(dev, bled);
+ aac_send_iop_reset(dev);
/*
* Check to see if KERNEL_UP_AND_RUNNING
* Wait for the adapter to be up and running.
@@ -769,7 +771,7 @@ static int aac_src_restart_adapter(struct aac_dev *dev, int bled, u8 reset_type)
}
break;
default:
- aac_send_iop_reset(dev, bled);
+ aac_send_iop_reset(dev);
break;
}
--
2.7.4
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH 11/19] aacraid: Add periodic checks to see IOP reset status
2017-05-07 13:34 [PATCH 00/19] aacraid: Patchset with reset rework and misc fixes Raghava Aditya Renukunta
` (9 preceding siblings ...)
2017-05-07 13:34 ` [PATCH 10/19] aacraid: Rework " Raghava Aditya Renukunta
@ 2017-05-07 13:34 ` Raghava Aditya Renukunta
2017-05-07 13:34 ` [PATCH 12/19] aacraid: Rework SOFT reset code Raghava Aditya Renukunta
` (8 subsequent siblings)
19 siblings, 0 replies; 22+ messages in thread
From: Raghava Aditya Renukunta @ 2017-05-07 13:34 UTC (permalink / raw)
To: jejb, martin.petersen, linux-scsi
Cc: David.Carroll, Gana.Sridaran, Scott.Benesh, Prasad.Munirathnam
Added function that waits with a timeout for the ctrl to be up and running
after triggering an IOP reset. Also removed 30 sec sleep as it is not
needed.
Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
---
drivers/scsi/aacraid/aacraid.h | 1 +
drivers/scsi/aacraid/src.c | 45 ++++++++++++++++++++++++++++++++++++++++--
2 files changed, 44 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
index 993f134..829f3d8 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -2519,6 +2519,7 @@ struct aac_hba_info {
#define SELF_TEST_FAILED 0x00000004
#define MONITOR_PANIC 0x00000020
+#define KERNEL_BOOTING 0x00000040
#define KERNEL_UP_AND_RUNNING 0x00000080
#define KERNEL_PANIC 0x00000100
#define FLASH_UPD_PENDING 0x00002000
diff --git a/drivers/scsi/aacraid/src.c b/drivers/scsi/aacraid/src.c
index e8e9178..67185eb 100644
--- a/drivers/scsi/aacraid/src.c
+++ b/drivers/scsi/aacraid/src.c
@@ -694,6 +694,37 @@ static void aac_dump_fw_fib_iop_reset(struct aac_dev *dev)
0, 0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL);
}
+static bool aac_is_ctrl_up_and_running(struct aac_dev *dev)
+{
+ bool ctrl_up = true;
+ unsigned long status, start;
+ bool is_up = false;
+
+ start = jiffies;
+ do {
+ schedule();
+ status = src_readl(dev, MUnit.OMR);
+
+ if (status == 0xffffffff)
+ status = 0;
+
+ if (status & KERNEL_BOOTING) {
+ start = jiffies;
+ continue;
+ }
+
+ if (time_after(jiffies, start+HZ*SOFT_RESET_TIME)) {
+ ctrl_up = false;
+ break;
+ }
+
+ is_up = status & KERNEL_UP_AND_RUNNING;
+
+ } while (!is_up);
+
+ return ctrl_up;
+}
+
static void aac_notify_fw_of_iop_reset(struct aac_dev *dev)
{
aac_adapter_sync_cmd(dev, IOP_RESET_ALWAYS, 0, 0, 0, 0, 0, 0, NULL,
@@ -709,8 +740,6 @@ static void aac_send_iop_reset(struct aac_dev *dev)
aac_set_intx_mode(dev);
src_writel(dev, MUnit.IDR, IOP_SRC_RESET_MASK);
-
- msleep(30000);
}
static void aac_send_hardware_soft_reset(struct aac_dev *dev)
@@ -726,6 +755,7 @@ static void aac_send_hardware_soft_reset(struct aac_dev *dev)
static int aac_src_restart_adapter(struct aac_dev *dev, int bled, u8 reset_type)
{
unsigned long status, start;
+ bool is_ctrl_up;
if (bled < 0)
goto invalid_out;
@@ -745,6 +775,16 @@ static int aac_src_restart_adapter(struct aac_dev *dev, int bled, u8 reset_type)
switch (reset_type) {
case IOP_HWSOFT_RESET:
aac_send_iop_reset(dev);
+
+ /*
+ * Creates a delay or wait till up and running comes thru
+ */
+ is_ctrl_up = aac_is_ctrl_up_and_running(dev);
+ if (!is_ctrl_up)
+ dev_err(&dev->pdev->dev, "IOP reset failed\n");
+ else
+ goto set_startup;
+
/*
* Check to see if KERNEL_UP_AND_RUNNING
* Wait for the adapter to be up and running.
@@ -780,6 +820,7 @@ static int aac_src_restart_adapter(struct aac_dev *dev, int bled, u8 reset_type)
if (src_readl(dev, MUnit.OMR) & KERNEL_PANIC)
return -ENODEV;
+set_startup:
if (startup_timeout < 300)
startup_timeout = 300;
--
2.7.4
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH 12/19] aacraid: Rework SOFT reset code
2017-05-07 13:34 [PATCH 00/19] aacraid: Patchset with reset rework and misc fixes Raghava Aditya Renukunta
` (10 preceding siblings ...)
2017-05-07 13:34 ` [PATCH 11/19] aacraid: Add periodic checks to see IOP reset status Raghava Aditya Renukunta
@ 2017-05-07 13:34 ` Raghava Aditya Renukunta
2017-05-07 13:34 ` [PATCH 13/19] aacraid: Rework aac_src_restart Raghava Aditya Renukunta
` (7 subsequent siblings)
19 siblings, 0 replies; 22+ messages in thread
From: Raghava Aditya Renukunta @ 2017-05-07 13:34 UTC (permalink / raw)
To: jejb, martin.petersen, linux-scsi
Cc: David.Carroll, Gana.Sridaran, Scott.Benesh, Prasad.Munirathnam
Now the driver issues a soft reset and waits for the controller to be up
and running by periodically checking on the status of the controller
health registers. Also prevents ARC adapters from issuing soft reset if
IOP resets failed.
Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
---
drivers/scsi/aacraid/src.c | 38 ++++++++++++++++++--------------------
1 file changed, 18 insertions(+), 20 deletions(-)
diff --git a/drivers/scsi/aacraid/src.c b/drivers/scsi/aacraid/src.c
index 67185eb..8ed7be0 100644
--- a/drivers/scsi/aacraid/src.c
+++ b/drivers/scsi/aacraid/src.c
@@ -754,8 +754,8 @@ static void aac_send_hardware_soft_reset(struct aac_dev *dev)
static int aac_src_restart_adapter(struct aac_dev *dev, int bled, u8 reset_type)
{
- unsigned long status, start;
bool is_ctrl_up;
+ int ret = 0;
if (bled < 0)
goto invalid_out;
@@ -785,24 +785,21 @@ static int aac_src_restart_adapter(struct aac_dev *dev, int bled, u8 reset_type)
else
goto set_startup;
- /*
- * Check to see if KERNEL_UP_AND_RUNNING
- * Wait for the adapter to be up and running.
- * If !KERNEL_UP_AND_RUNNING issue HW Soft Reset
- */
- status = src_readl(dev, MUnit.OMR);
- if (dev->sa_firmware
- && !(status & KERNEL_UP_AND_RUNNING)) {
- start = jiffies;
- do {
- status = src_readl(dev, MUnit.OMR);
- if (time_after(jiffies,
- start+HZ*SOFT_RESET_TIME)) {
- aac_send_hardware_soft_reset(dev);
- start = jiffies;
- }
- } while (!(status & KERNEL_UP_AND_RUNNING));
+ if (!dev->sa_firmware) {
+ ret = -ENODEV;
+ goto out;
}
+
+ aac_send_hardware_soft_reset(dev);
+ dev->msi_enabled = 0;
+
+ is_ctrl_up = aac_is_ctrl_up_and_running(dev);
+ if (!is_ctrl_up) {
+ dev_err(&dev->pdev->dev, "SOFT reset failed\n");
+ ret = -ENODEV;
+ goto out;
+ }
+
break;
case HW_SOFT_RESET:
if (dev->sa_firmware) {
@@ -818,13 +815,14 @@ static int aac_src_restart_adapter(struct aac_dev *dev, int bled, u8 reset_type)
invalid_out:
if (src_readl(dev, MUnit.OMR) & KERNEL_PANIC)
- return -ENODEV;
+ ret = -ENODEV;
set_startup:
if (startup_timeout < 300)
startup_timeout = 300;
- return 0;
+out:
+ return ret;
}
/**
--
2.7.4
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH 13/19] aacraid: Rework aac_src_restart
2017-05-07 13:34 [PATCH 00/19] aacraid: Patchset with reset rework and misc fixes Raghava Aditya Renukunta
` (11 preceding siblings ...)
2017-05-07 13:34 ` [PATCH 12/19] aacraid: Rework SOFT reset code Raghava Aditya Renukunta
@ 2017-05-07 13:34 ` Raghava Aditya Renukunta
2017-05-07 13:34 ` [PATCH 14/19] aacraid: Use correct function to get ctrl health Raghava Aditya Renukunta
` (6 subsequent siblings)
19 siblings, 0 replies; 22+ messages in thread
From: Raghava Aditya Renukunta @ 2017-05-07 13:34 UTC (permalink / raw)
To: jejb, martin.petersen, linux-scsi
Cc: David.Carroll, Gana.Sridaran, Scott.Benesh, Prasad.Munirathnam
Removed switch case and replaced with if mask checks. Moved KERNEL_PANIC
check to when bled is less than 0.
Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
---
drivers/scsi/aacraid/src.c | 34 ++++++++++++----------------------
1 file changed, 12 insertions(+), 22 deletions(-)
diff --git a/drivers/scsi/aacraid/src.c b/drivers/scsi/aacraid/src.c
index 8ed7be0..10a589b 100644
--- a/drivers/scsi/aacraid/src.c
+++ b/drivers/scsi/aacraid/src.c
@@ -772,8 +772,7 @@ static int aac_src_restart_adapter(struct aac_dev *dev, int bled, u8 reset_type)
dev->a_ops.adapter_enable_int = aac_src_disable_interrupt;
- switch (reset_type) {
- case IOP_HWSOFT_RESET:
+ if (reset_type & HW_IOP_RESET) {
aac_send_iop_reset(dev);
/*
@@ -784,12 +783,14 @@ static int aac_src_restart_adapter(struct aac_dev *dev, int bled, u8 reset_type)
dev_err(&dev->pdev->dev, "IOP reset failed\n");
else
goto set_startup;
+ }
- if (!dev->sa_firmware) {
- ret = -ENODEV;
- goto out;
- }
+ if (!dev->sa_firmware) {
+ ret = -ENODEV;
+ goto out;
+ }
+ if (reset_type & HW_SOFT_RESET) {
aac_send_hardware_soft_reset(dev);
dev->msi_enabled = 0;
@@ -799,30 +800,19 @@ static int aac_src_restart_adapter(struct aac_dev *dev, int bled, u8 reset_type)
ret = -ENODEV;
goto out;
}
-
- break;
- case HW_SOFT_RESET:
- if (dev->sa_firmware) {
- aac_send_hardware_soft_reset(dev);
- aac_set_intx_mode(dev);
- }
- break;
- default:
- aac_send_iop_reset(dev);
- break;
}
-invalid_out:
-
- if (src_readl(dev, MUnit.OMR) & KERNEL_PANIC)
- ret = -ENODEV;
-
set_startup:
if (startup_timeout < 300)
startup_timeout = 300;
out:
return ret;
+
+invalid_out:
+ if (src_readl(dev, MUnit.OMR) & KERNEL_PANIC)
+ ret = -ENODEV;
+goto out;
}
/**
--
2.7.4
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH 14/19] aacraid: Use correct function to get ctrl health
2017-05-07 13:34 [PATCH 00/19] aacraid: Patchset with reset rework and misc fixes Raghava Aditya Renukunta
` (12 preceding siblings ...)
2017-05-07 13:34 ` [PATCH 13/19] aacraid: Rework aac_src_restart Raghava Aditya Renukunta
@ 2017-05-07 13:34 ` Raghava Aditya Renukunta
2017-05-07 13:34 ` [PATCH 15/19] aacraid: Make sure ioctl returns on controller reset Raghava Aditya Renukunta
` (5 subsequent siblings)
19 siblings, 0 replies; 22+ messages in thread
From: Raghava Aditya Renukunta @ 2017-05-07 13:34 UTC (permalink / raw)
To: jejb, martin.petersen, linux-scsi
Cc: David.Carroll, Gana.Sridaran, Scott.Benesh, Prasad.Munirathnam
The command thread checks the ctrl health periodically before sending
updates to the controller. The function that it uses is aac_check_health
which does more than get the health status.
Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
---
drivers/scsi/aacraid/commsup.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c
index 3299012..f26543a 100644
--- a/drivers/scsi/aacraid/commsup.c
+++ b/drivers/scsi/aacraid/commsup.c
@@ -2476,7 +2476,7 @@ int aac_command_thread(void *data)
if ((time_before(next_check_jiffies,next_jiffies))
&& ((difference = next_check_jiffies - jiffies) <= 0)) {
next_check_jiffies = next_jiffies;
- if (aac_check_health(dev) == 0) {
+ if (aac_adapter_check_health(dev) == 0) {
difference = ((long)(unsigned)check_interval)
* HZ;
next_check_jiffies = jiffies + difference;
@@ -2489,7 +2489,7 @@ int aac_command_thread(void *data)
int ret;
/* Don't even try to talk to adapter if its sick */
- ret = aac_check_health(dev);
+ ret = aac_adapter_check_health(dev);
if (ret || !dev->queues)
break;
next_check_jiffies = jiffies
--
2.7.4
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH 15/19] aacraid: Make sure ioctl returns on controller reset
2017-05-07 13:34 [PATCH 00/19] aacraid: Patchset with reset rework and misc fixes Raghava Aditya Renukunta
` (13 preceding siblings ...)
2017-05-07 13:34 ` [PATCH 14/19] aacraid: Use correct function to get ctrl health Raghava Aditya Renukunta
@ 2017-05-07 13:34 ` Raghava Aditya Renukunta
2017-05-07 13:34 ` [PATCH 16/19] aacraid: Enable ctrl reset for both hba and arc Raghava Aditya Renukunta
` (4 subsequent siblings)
19 siblings, 0 replies; 22+ messages in thread
From: Raghava Aditya Renukunta @ 2017-05-07 13:34 UTC (permalink / raw)
To: jejb, martin.petersen, linux-scsi
Cc: David.Carroll, Gana.Sridaran, Scott.Benesh, Prasad.Munirathnam
Made sure that ioctl commands return in case of a controller reset.
Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
---
drivers/scsi/aacraid/commsup.c | 20 +++++++++++++++++---
1 file changed, 17 insertions(+), 3 deletions(-)
diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c
index f26543a..a026790 100644
--- a/drivers/scsi/aacraid/commsup.c
+++ b/drivers/scsi/aacraid/commsup.c
@@ -804,10 +804,13 @@ int aac_hba_send(u8 command, struct fib *fibptr, fib_callback callback,
return -EFAULT;
/* Only set for first known interruptable command */
+ fibptr->flags |= FIB_CONTEXT_FLAG_WAIT;
+ fibptr->flags &= ~(FIB_CONTEXT_FLAG_WAIT);
if (down_interruptible(&fibptr->event_wait)) {
fibptr->done = 2;
up(&fibptr->event_wait);
}
+
spin_lock_irqsave(&fibptr->event_lock, flags);
if ((fibptr->done == 0) || (fibptr->done == 2)) {
fibptr->done = 2; /* Tell interrupt we aborted */
@@ -1514,6 +1517,7 @@ static int _aac_reset_adapter(struct aac_dev *aac, int forced, u8 reset_type)
int jafo = 0;
int bled;
u64 dmamask;
+ int num_of_fibs = 0;
/*
* Assumptions:
@@ -1547,10 +1551,20 @@ static int _aac_reset_adapter(struct aac_dev *aac, int forced, u8 reset_type)
/*
* Loop through the fibs, close the synchronous FIBS
*/
- for (retval = 1, index = 0; index < (aac->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB); index++) {
+ retval = 1;
+ num_of_fibs = aac->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB;
+ for (index = 0; index < num_of_fibs; index++) {
+
struct fib *fib = &aac->fibs[index];
- if (!(fib->hw_fib_va->header.XferState & cpu_to_le32(NoResponseExpected | Async)) &&
- (fib->hw_fib_va->header.XferState & cpu_to_le32(ResponseExpected))) {
+ __le32 XferState = fib->hw_fib_va->header.XferState;
+ bool is_response_expected = false;
+
+ if (!(XferState & cpu_to_le32(NoResponseExpected | Async)) &&
+ (XferState & cpu_to_le32(ResponseExpected)))
+ is_response_expected = true;
+
+ if (is_response_expected
+ || fib->flags & FIB_CONTEXT_FLAG_WAIT) {
unsigned long flagv;
spin_lock_irqsave(&fib->event_lock, flagv);
up(&fib->event_wait);
--
2.7.4
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH 16/19] aacraid: Enable ctrl reset for both hba and arc
2017-05-07 13:34 [PATCH 00/19] aacraid: Patchset with reset rework and misc fixes Raghava Aditya Renukunta
` (14 preceding siblings ...)
2017-05-07 13:34 ` [PATCH 15/19] aacraid: Make sure ioctl returns on controller reset Raghava Aditya Renukunta
@ 2017-05-07 13:34 ` Raghava Aditya Renukunta
2017-05-07 13:34 ` [PATCH 17/19] aacraid : Add reset debugging statements Raghava Aditya Renukunta
` (3 subsequent siblings)
19 siblings, 0 replies; 22+ messages in thread
From: Raghava Aditya Renukunta @ 2017-05-07 13:34 UTC (permalink / raw)
To: jejb, martin.petersen, linux-scsi
Cc: David.Carroll, Gana.Sridaran, Scott.Benesh, Prasad.Munirathnam
Make sure that IOP and SOFT reset are enabled for both for both
arc and hba1000 controllers.
Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
---
drivers/scsi/aacraid/linit.c | 77 +++++++++++++++++++++++---------------------
1 file changed, 40 insertions(+), 37 deletions(-)
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index 3dea438..d933d2f 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -828,6 +828,11 @@ static int aac_eh_reset(struct scsi_cmnd* cmd)
u32 bus, cid;
int ret = FAILED;
int status = 0;
+ __le32 supported_options2 = 0;
+ bool is_mu_reset;
+ bool is_ignore_reset;
+ bool is_doorbell_reset;
+
bus = aac_logical_to_phys(scmd_channel(cmd));
cid = scmd_id(cmd);
@@ -900,9 +905,9 @@ static int aac_eh_reset(struct scsi_cmnd* cmd)
msleep(1000);
}
- if (ret != SUCCESS)
- pr_err("%s: Host adapter reset request timed out\n",
- AAC_DRIVERNAME);
+ if (ret == SUCCESS)
+ goto out;
+
} else {
/* Mark the assoc. FIB to not complete, eh handler does this */
@@ -918,44 +923,42 @@ static int aac_eh_reset(struct scsi_cmnd* cmd)
cmd->SCp.phase = AAC_OWNER_ERROR_HANDLER;
}
}
+ }
- pr_err("%s: Host adapter reset request. SCSI hang ?\n",
- AAC_DRIVERNAME);
+ pr_err("%s: Host adapter reset request. SCSI hang ?\n", AAC_DRIVERNAME);
+
+ /*
+ * Check the health of the controller
+ */
+ status = aac_adapter_check_health(aac);
+ if (status)
+ dev_err(&aac->pdev->dev, "Adapter health - %d\n", status);
+
+ count = get_num_of_incomplete_fibs(aac);
+ if (count == 0)
+ return SUCCESS;
- /*
- * Check the health of the controller
- */
- status = aac_adapter_check_health(aac);
- if (status)
- dev_err(&aac->pdev->dev, "Adapter health - %d\n",
- status);
-
- count = get_num_of_incomplete_fibs(aac);
- if (count == 0)
- return SUCCESS;
-
- /*
- * This adapter needs a blind reset, only do so for
- * Adapters that support a register, instead of a commanded,
- * reset.
- */
- if (((aac->supplement_adapter_info.supported_options2 &
- AAC_OPTION_MU_RESET) ||
- (aac->supplement_adapter_info.supported_options2 &
- AAC_OPTION_DOORBELL_RESET)) &&
- aac_check_reset &&
- ((aac_check_reset != 1) ||
- !(aac->supplement_adapter_info.supported_options2 &
- AAC_OPTION_IGNORE_RESET))) {
- /* Bypass wait for command quiesce */
- aac_reset_adapter(aac, 2, IOP_HWSOFT_RESET);
- }
- ret = SUCCESS;
- }
/*
- * Cause an immediate retry of the command with a ten second delay
- * after successful tur
+ * Check if reset is supported by the firmware
*/
+ supported_options2 = aac->supplement_adapter_info.supported_options2;
+ is_mu_reset = supported_options2 & AAC_OPTION_MU_RESET;
+ is_doorbell_reset = supported_options2 & AAC_OPTION_DOORBELL_RESET;
+ is_ignore_reset = supported_options2 & AAC_OPTION_IGNORE_RESET;
+ /*
+ * This adapter needs a blind reset, only do so for
+ * Adapters that support a register, instead of a commanded,
+ * reset.
+ */
+ if ((is_mu_reset || is_doorbell_reset)
+ && aac_check_reset
+ && (aac_check_reset != -1 || !is_ignore_reset)) {
+ /* Bypass wait for command quiesce */
+ aac_reset_adapter(aac, 2, IOP_HWSOFT_RESET);
+ }
+ ret = SUCCESS;
+
+out:
return ret;
}
--
2.7.4
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH 17/19] aacraid : Add reset debugging statements
2017-05-07 13:34 [PATCH 00/19] aacraid: Patchset with reset rework and misc fixes Raghava Aditya Renukunta
` (15 preceding siblings ...)
2017-05-07 13:34 ` [PATCH 16/19] aacraid: Enable ctrl reset for both hba and arc Raghava Aditya Renukunta
@ 2017-05-07 13:34 ` Raghava Aditya Renukunta
2017-05-07 13:34 ` [PATCH 18/19] aacraid: Remove reference to Series-9 Raghava Aditya Renukunta
` (2 subsequent siblings)
19 siblings, 0 replies; 22+ messages in thread
From: Raghava Aditya Renukunta @ 2017-05-07 13:34 UTC (permalink / raw)
To: jejb, martin.petersen, linux-scsi
Cc: David.Carroll, Gana.Sridaran, Scott.Benesh, Prasad.Munirathnam
Added info and error messages in controller reset function to log
information about the status of the IOP/SOFT reset.
Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
---
drivers/scsi/aacraid/src.c | 15 +++++++++++----
1 file changed, 11 insertions(+), 4 deletions(-)
diff --git a/drivers/scsi/aacraid/src.c b/drivers/scsi/aacraid/src.c
index 10a589b..5367d3f 100644
--- a/drivers/scsi/aacraid/src.c
+++ b/drivers/scsi/aacraid/src.c
@@ -761,8 +761,7 @@ static int aac_src_restart_adapter(struct aac_dev *dev, int bled, u8 reset_type)
goto invalid_out;
if (bled)
- pr_err("%s%d: adapter kernel panic'd %x.\n",
- dev->name, dev->id, bled);
+ dev_err(&dev->pdev->dev, "adapter kernel panic'd %x.\n", bled);
/*
* When there is a BlinkLED, IOP_RESET has not effect
@@ -772,7 +771,10 @@ static int aac_src_restart_adapter(struct aac_dev *dev, int bled, u8 reset_type)
dev->a_ops.adapter_enable_int = aac_src_disable_interrupt;
+ dev_err(&dev->pdev->dev, "Controller reset type is %d\n", reset_type);
+
if (reset_type & HW_IOP_RESET) {
+ dev_info(&dev->pdev->dev, "Issuing IOP reset\n");
aac_send_iop_reset(dev);
/*
@@ -781,16 +783,20 @@ static int aac_src_restart_adapter(struct aac_dev *dev, int bled, u8 reset_type)
is_ctrl_up = aac_is_ctrl_up_and_running(dev);
if (!is_ctrl_up)
dev_err(&dev->pdev->dev, "IOP reset failed\n");
- else
+ else {
+ dev_info(&dev->pdev->dev, "IOP reset succeded\n");
goto set_startup;
+ }
}
if (!dev->sa_firmware) {
+ dev_err(&dev->pdev->dev, "ARC Reset attempt failed\n");
ret = -ENODEV;
goto out;
}
if (reset_type & HW_SOFT_RESET) {
+ dev_info(&dev->pdev->dev, "Issuing SOFT reset\n");
aac_send_hardware_soft_reset(dev);
dev->msi_enabled = 0;
@@ -799,7 +805,8 @@ static int aac_src_restart_adapter(struct aac_dev *dev, int bled, u8 reset_type)
dev_err(&dev->pdev->dev, "SOFT reset failed\n");
ret = -ENODEV;
goto out;
- }
+ } else
+ dev_info(&dev->pdev->dev, "SOFT reset succeded\n");
}
set_startup:
--
2.7.4
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH 18/19] aacraid: Remove reference to Series-9
2017-05-07 13:34 [PATCH 00/19] aacraid: Patchset with reset rework and misc fixes Raghava Aditya Renukunta
` (16 preceding siblings ...)
2017-05-07 13:34 ` [PATCH 17/19] aacraid : Add reset debugging statements Raghava Aditya Renukunta
@ 2017-05-07 13:34 ` Raghava Aditya Renukunta
2017-05-07 13:34 ` [PATCH 19/19] aacraid: Update driver version to 50834 Raghava Aditya Renukunta
2017-05-08 21:16 ` [PATCH 00/19] aacraid: Patchset with reset rework and misc fixes Raghava Aditya Renukunta
19 siblings, 0 replies; 22+ messages in thread
From: Raghava Aditya Renukunta @ 2017-05-07 13:34 UTC (permalink / raw)
To: jejb, martin.petersen, linux-scsi
Cc: David.Carroll, Gana.Sridaran, Scott.Benesh, Prasad.Munirathnam
Removed reference to Series-9 HBA and created arc ctrl check function.
Signed-off-by: Prasad B Munirathnam <prasad.munirathnam@microsemi.com>
Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
---
drivers/scsi/aacraid/aacraid.h | 13 ++++++++++++-
drivers/scsi/aacraid/comminit.c | 18 ++++--------------
drivers/scsi/aacraid/commsup.c | 5 +----
drivers/scsi/aacraid/linit.c | 9 ++-------
4 files changed, 19 insertions(+), 26 deletions(-)
diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
index 829f3d8..58ccd2a 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -424,7 +424,6 @@ struct aac_ciss_identify_pd {
#define PMC_DEVICE_S6 0x28b
#define PMC_DEVICE_S7 0x28c
#define PMC_DEVICE_S8 0x28d
-#define PMC_DEVICE_S9 0x28f
#define aac_phys_to_logical(x) ((x)+1)
#define aac_logical_to_phys(x) ((x)?(x)-1:0)
@@ -2684,6 +2683,18 @@ int aac_probe_container(struct aac_dev *dev, int cid);
int _aac_rx_init(struct aac_dev *dev);
int aac_rx_select_comm(struct aac_dev *dev, int comm);
int aac_rx_deliver_producer(struct fib * fib);
+
+static inline int aac_is_src(struct aac_dev *dev)
+{
+ u16 device = dev->pdev->device;
+
+ if (device == PMC_DEVICE_S6 ||
+ device == PMC_DEVICE_S7 ||
+ device == PMC_DEVICE_S8)
+ return 1;
+ return 0;
+}
+
char * get_container_type(unsigned type);
extern int numacb;
extern char aac_driver_version[];
diff --git a/drivers/scsi/aacraid/comminit.c b/drivers/scsi/aacraid/comminit.c
index 1151505..9ee025b 100644
--- a/drivers/scsi/aacraid/comminit.c
+++ b/drivers/scsi/aacraid/comminit.c
@@ -53,11 +53,8 @@ static inline int aac_is_msix_mode(struct aac_dev *dev)
{
u32 status = 0;
- if (dev->pdev->device == PMC_DEVICE_S6 ||
- dev->pdev->device == PMC_DEVICE_S7 ||
- dev->pdev->device == PMC_DEVICE_S8) {
+ if (aac_is_src(dev))
status = src_readl(dev, MUnit.OMR);
- }
return (status & AAC_INT_MODE_MSIX);
}
@@ -325,9 +322,7 @@ int aac_send_shutdown(struct aac_dev * dev)
/* FIB should be freed only after getting the response from the F/W */
if (status != -ERESTARTSYS)
aac_fib_free(fibctx);
- if ((dev->pdev->device == PMC_DEVICE_S7 ||
- dev->pdev->device == PMC_DEVICE_S8 ||
- dev->pdev->device == PMC_DEVICE_S9) &&
+ if (aac_is_src(dev) &&
dev->msi_enabled)
aac_set_intx_mode(dev);
return status;
@@ -583,9 +578,7 @@ struct aac_dev *aac_init_adapter(struct aac_dev *dev)
dev->max_fib_size = status[1] & 0xFFE0;
host->sg_tablesize = status[2] >> 16;
dev->sg_tablesize = status[2] & 0xFFFF;
- if (dev->pdev->device == PMC_DEVICE_S7 ||
- dev->pdev->device == PMC_DEVICE_S8 ||
- dev->pdev->device == PMC_DEVICE_S9) {
+ if (aac_is_src(dev)) {
if (host->can_queue > (status[3] >> 16) -
AAC_NUM_MGT_FIB)
host->can_queue = (status[3] >> 16) -
@@ -604,10 +597,7 @@ struct aac_dev *aac_init_adapter(struct aac_dev *dev)
pr_warn("numacb=%d ignored\n", numacb);
}
- if (dev->pdev->device == PMC_DEVICE_S6 ||
- dev->pdev->device == PMC_DEVICE_S7 ||
- dev->pdev->device == PMC_DEVICE_S8 ||
- dev->pdev->device == PMC_DEVICE_S9)
+ if (aac_is_src(dev))
aac_define_int_mode(dev);
/*
* Ok now init the communication subsystem
diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c
index a026790..184e9cf 100644
--- a/drivers/scsi/aacraid/commsup.c
+++ b/drivers/scsi/aacraid/commsup.c
@@ -2595,10 +2595,7 @@ void aac_free_irq(struct aac_dev *dev)
int cpu;
cpu = cpumask_first(cpu_online_mask);
- if (dev->pdev->device == PMC_DEVICE_S6 ||
- dev->pdev->device == PMC_DEVICE_S7 ||
- dev->pdev->device == PMC_DEVICE_S8 ||
- dev->pdev->device == PMC_DEVICE_S9) {
+ if (aac_is_src(dev)) {
if (dev->max_msix > 1) {
for (i = 0; i < dev->max_msix; i++)
free_irq(pci_irq_vector(dev->pdev, i),
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index d933d2f..0f277df 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -1416,10 +1416,7 @@ static void __aac_shutdown(struct aac_dev * aac)
kthread_stop(aac->thread);
}
aac_adapter_disable_int(aac);
- if (aac->pdev->device == PMC_DEVICE_S6 ||
- aac->pdev->device == PMC_DEVICE_S7 ||
- aac->pdev->device == PMC_DEVICE_S8 ||
- aac->pdev->device == PMC_DEVICE_S9) {
+ if (aac_is_src(aac)) {
if (aac->max_msix > 1) {
for (i = 0; i < aac->max_msix; i++) {
free_irq(pci_irq_vector(aac->pdev, i),
@@ -1684,9 +1681,7 @@ static int aac_acquire_resources(struct aac_dev *dev)
aac_adapter_enable_int(dev);
- if ((dev->pdev->device == PMC_DEVICE_S7 ||
- dev->pdev->device == PMC_DEVICE_S8 ||
- dev->pdev->device == PMC_DEVICE_S9))
+ if (aac_is_src(dev))
aac_define_int_mode(dev);
if (dev->msi_enabled)
--
2.7.4
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH 19/19] aacraid: Update driver version to 50834
2017-05-07 13:34 [PATCH 00/19] aacraid: Patchset with reset rework and misc fixes Raghava Aditya Renukunta
` (17 preceding siblings ...)
2017-05-07 13:34 ` [PATCH 18/19] aacraid: Remove reference to Series-9 Raghava Aditya Renukunta
@ 2017-05-07 13:34 ` Raghava Aditya Renukunta
2017-05-08 21:16 ` [PATCH 00/19] aacraid: Patchset with reset rework and misc fixes Raghava Aditya Renukunta
19 siblings, 0 replies; 22+ messages in thread
From: Raghava Aditya Renukunta @ 2017-05-07 13:34 UTC (permalink / raw)
To: jejb, martin.petersen, linux-scsi
Cc: David.Carroll, Gana.Sridaran, Scott.Benesh, Prasad.Munirathnam
Update the driver version to 50834
Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
---
drivers/scsi/aacraid/aacraid.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
index 58ccd2a..0995265 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -97,7 +97,7 @@ enum {
#define PMC_GLOBAL_INT_BIT0 0x00000001
#ifndef AAC_DRIVER_BUILD
-# define AAC_DRIVER_BUILD 50792
+# define AAC_DRIVER_BUILD 50834
# define AAC_DRIVER_BRANCH "-custom"
#endif
#define MAXIMUM_NUM_CONTAINERS 32
--
2.7.4
^ permalink raw reply related [flat|nested] 22+ messages in thread* RE: [PATCH 00/19] aacraid: Patchset with reset rework and misc fixes
2017-05-07 13:34 [PATCH 00/19] aacraid: Patchset with reset rework and misc fixes Raghava Aditya Renukunta
` (18 preceding siblings ...)
2017-05-07 13:34 ` [PATCH 19/19] aacraid: Update driver version to 50834 Raghava Aditya Renukunta
@ 2017-05-08 21:16 ` Raghava Aditya Renukunta
19 siblings, 0 replies; 22+ messages in thread
From: Raghava Aditya Renukunta @ 2017-05-08 21:16 UTC (permalink / raw)
To: Raghava Aditya Renukunta, jejb@linux.vnet.ibm.com,
martin.petersen@oracle.com, linux-scsi@vger.kernel.org
Cc: Dave Carroll, Gana Sridaran, Scott Benesh, Prasad Munirathnam
Hi,
The patch set has been sent twice. Please ignore the later sent/received patch set.
I had sent the original patch set on Saturday, but I did not receive a confirmation nor did any mailing list archive(http://marc.info/?l=linux-scsi) pick them up (should have waited). The next day I resent the patch set and here we are.
Regards,
Raghava Aditya
> -----Original Message-----
> From: linux-scsi-owner@vger.kernel.org [mailto:linux-scsi-
> owner@vger.kernel.org] On Behalf Of Raghava Aditya Renukunta
> Sent: Sunday, May 7, 2017 6:34 AM
> To: jejb@linux.vnet.ibm.com; martin.petersen@oracle.com; linux-
> scsi@vger.kernel.org
> Cc: Dave Carroll <david.carroll@microsemi.com>; Gana Sridaran
> <gana.sridaran@microsemi.com>; Scott Benesh
> <scott.benesh@microsemi.com>; Prasad Munirathnam
> <Prasad.Munirathnam@microsemi.com>
> Subject: [PATCH 00/19] aacraid: Patchset with reset rework and misc fixes
>
> EXTERNAL EMAIL
>
>
> This patchset primarily focuses on tweaking and hardening the controller
> reset support for both ARC and HBA1000 devices. Now the driver can only
> reset the controller thru eh reset. Included a srb memory fix and pci
> dma allocation fix.
>
> Raghava Aditya Renukunta (19):
> [SCSI] aacraid: Remove GFP_DMA for raw srb memory
> [SCSI] aacraid: Fix DMAR issues with iommu=pt
> [SCSI] aacraid: Added 32 and 64 queue depth for arc natives
> [SCSI] aacraid: Set correct Queue Depth for HBA1000 RAW disks
> [SCSI] aacraid: Remove reset support from check_health
> [SCSI] aacraid: Change wait time for fib completion
> [SCSI] aacraid: Log count info of scsi cmds before reset
> [SCSI] aacraid: Print ctrl status before eh reset
> [SCSI] aacraid: Using single reset mask for IOP reset
> [SCSI] aacraid: Rework IOP reset
> [SCSI] aacraid: Add periodic checks to see IOP reset status
> [SCSI] aacraid: Rework SOFT reset code
> [SCSI] aacraid: Rework aac_src_restart
> [SCSI] aacraid: Use correct function to get ctrl health
> [SCSI] aacraid: Make sure ioctl returns on controller reset
> [SCSI] aacraid: Enable ctrl reset for both hba and arc
> [SCSI] aacraid: Add reset debugging statements
> [SCSI] aacraid: Remove reference to Series-9
> [SCSI] aacraid: Update driver version to 50834
>
> drivers/scsi/aacraid/aachba.c | 17 ++-
> drivers/scsi/aacraid/aacraid.h | 22 +++-
> drivers/scsi/aacraid/commctrl.c | 13 ++-
> drivers/scsi/aacraid/comminit.c | 18 +---
> drivers/scsi/aacraid/commsup.c | 73 +++++++------
> drivers/scsi/aacraid/linit.c | 232 ++++++++++++++++++++++++--------------
> --
> drivers/scsi/aacraid/src.c | 136 +++++++++++++----------
> 7 files changed, 296 insertions(+), 215 deletions(-)
>
> --
> 2.7.4
^ permalink raw reply [flat|nested] 22+ messages in thread