From: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
To: jejb@linux.vnet.ibm.com, martin.petersen@oracle.com,
linux-scsi@vger.kernel.org
Cc: David.Carroll@microsemi.com, Gana.Sridaran@microsemi.com,
Scott.Benesh@microsemi.com, Prasad.Munirathnam@microsemi.com
Subject: [PATCH V2 15/19] aacraid: Make sure ioctl returns on controller reset
Date: Wed, 10 May 2017 09:39:49 -0700 [thread overview]
Message-ID: <1494434393-17261-16-git-send-email-RaghavaAditya.Renukunta@microsemi.com> (raw)
In-Reply-To: <1494434393-17261-1-git-send-email-RaghavaAditya.Renukunta@microsemi.com>
Made sure that ioctl commands return in case of a controller reset.
Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
---
Changes in V2:
Removed incorrect up
Cleared wait flag once event is received not before
drivers/scsi/aacraid/commsup.c | 25 ++++++++++++++++++-------
1 file changed, 18 insertions(+), 7 deletions(-)
diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c
index f26543a..7bb0253 100644
--- a/drivers/scsi/aacraid/commsup.c
+++ b/drivers/scsi/aacraid/commsup.c
@@ -803,11 +803,11 @@ int aac_hba_send(u8 command, struct fib *fibptr, fib_callback callback,
if (aac_check_eeh_failure(dev))
return -EFAULT;
- /* Only set for first known interruptable command */
- if (down_interruptible(&fibptr->event_wait)) {
+ fibptr->flags |= FIB_CONTEXT_FLAG_WAIT;
+ if (down_interruptible(&fibptr->event_wait))
fibptr->done = 2;
- up(&fibptr->event_wait);
- }
+ fibptr->flags &= ~(FIB_CONTEXT_FLAG_WAIT);
+
spin_lock_irqsave(&fibptr->event_lock, flags);
if ((fibptr->done == 0) || (fibptr->done == 2)) {
fibptr->done = 2; /* Tell interrupt we aborted */
@@ -1514,6 +1514,7 @@ static int _aac_reset_adapter(struct aac_dev *aac, int forced, u8 reset_type)
int jafo = 0;
int bled;
u64 dmamask;
+ int num_of_fibs = 0;
/*
* Assumptions:
@@ -1547,10 +1548,20 @@ static int _aac_reset_adapter(struct aac_dev *aac, int forced, u8 reset_type)
/*
* Loop through the fibs, close the synchronous FIBS
*/
- for (retval = 1, index = 0; index < (aac->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB); index++) {
+ retval = 1;
+ num_of_fibs = aac->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB;
+ for (index = 0; index < num_of_fibs; index++) {
+
struct fib *fib = &aac->fibs[index];
- if (!(fib->hw_fib_va->header.XferState & cpu_to_le32(NoResponseExpected | Async)) &&
- (fib->hw_fib_va->header.XferState & cpu_to_le32(ResponseExpected))) {
+ __le32 XferState = fib->hw_fib_va->header.XferState;
+ bool is_response_expected = false;
+
+ if (!(XferState & cpu_to_le32(NoResponseExpected | Async)) &&
+ (XferState & cpu_to_le32(ResponseExpected)))
+ is_response_expected = true;
+
+ if (is_response_expected
+ || fib->flags & FIB_CONTEXT_FLAG_WAIT) {
unsigned long flagv;
spin_lock_irqsave(&fib->event_lock, flagv);
up(&fib->event_wait);
--
2.7.4
next prev parent reply other threads:[~2017-05-10 6:24 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-10 16:39 [PATCH V2 00/19] aacraid: Patchset with reset rework and misc fixes Raghava Aditya Renukunta
2017-05-10 16:39 ` [PATCH V2 01/19] aacraid: Remove __GFP_DMA for raw srb memory Raghava Aditya Renukunta
2017-05-10 15:36 ` Dave Carroll
2017-05-10 16:39 ` [PATCH V2 02/19] aacraid: Fix DMAR issues with iommu=pt Raghava Aditya Renukunta
2017-05-10 15:37 ` Dave Carroll
2017-05-10 16:39 ` [PATCH V2 03/19] aacraid: Added 32 and 64 queue depth for arc natives Raghava Aditya Renukunta
2017-05-10 16:39 ` [PATCH V2 04/19] aacraid: Set correct Queue Depth for HBA1000 RAW disks Raghava Aditya Renukunta
2017-05-10 16:39 ` [PATCH V2 05/19] aacraid: Remove reset support from check_health Raghava Aditya Renukunta
2017-05-10 16:39 ` [PATCH V2 06/19] aacraid: Change wait time for fib completion Raghava Aditya Renukunta
2017-05-10 16:39 ` [PATCH V2 07/19] aacraid: Log count info of scsi cmds before reset Raghava Aditya Renukunta
2017-05-10 16:39 ` [PATCH V2 08/19] aacraid: Print ctrl status before eh reset Raghava Aditya Renukunta
2017-05-10 16:39 ` [PATCH V2 09/19] aacraid: Using single reset mask for IOP reset Raghava Aditya Renukunta
2017-05-10 16:39 ` [PATCH V2 10/19] aacraid: Rework " Raghava Aditya Renukunta
2017-05-10 16:39 ` [PATCH V2 11/19] aacraid: Add periodic checks to see IOP reset status Raghava Aditya Renukunta
2017-05-10 16:39 ` [PATCH V2 12/19] aacraid: Rework SOFT reset code Raghava Aditya Renukunta
2017-05-10 16:39 ` [PATCH V2 13/19] aacraid: Rework aac_src_restart Raghava Aditya Renukunta
2017-05-10 16:39 ` [PATCH V2 14/19] aacraid: Use correct function to get ctrl health Raghava Aditya Renukunta
2017-05-10 16:39 ` Raghava Aditya Renukunta [this message]
2017-05-10 15:40 ` [PATCH V2 15/19] aacraid: Make sure ioctl returns on controller reset Dave Carroll
2017-05-10 16:39 ` [PATCH V2 16/19] aacraid: Enable ctrl reset for both hba and arc Raghava Aditya Renukunta
2017-05-10 16:39 ` [PATCH V2 17/19] aacraid : Add reset debugging statements Raghava Aditya Renukunta
2017-05-10 16:39 ` [PATCH V2 18/19] aacraid: Remove reference to Series-9 Raghava Aditya Renukunta
2017-05-10 16:39 ` [PATCH V2 19/19] aacraid: Update driver version to 50834 Raghava Aditya Renukunta
2017-05-12 3:07 ` [PATCH V2 00/19] aacraid: Patchset with reset rework and misc fixes Martin K. Petersen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1494434393-17261-16-git-send-email-RaghavaAditya.Renukunta@microsemi.com \
--to=raghavaaditya.renukunta@microsemi.com \
--cc=David.Carroll@microsemi.com \
--cc=Gana.Sridaran@microsemi.com \
--cc=Prasad.Munirathnam@microsemi.com \
--cc=Scott.Benesh@microsemi.com \
--cc=jejb@linux.vnet.ibm.com \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox