From: Varun Prakash <varun@chelsio.com>
To: martin.petersen@oracle.com
Cc: linux-scsi@vger.kernel.org, indranil@chelsio.com, varun@chelsio.com
Subject: [PATCH] scsi: libcxgbi: fix skb use after free
Date: Tue, 16 May 2017 19:23:44 +0530 [thread overview]
Message-ID: <1494942824-2252-1-git-send-email-varun@chelsio.com> (raw)
skb->data is assigned to task->hdr in cxgbi_conn_alloc_pdu(),
skb gets freed after tx but task->hdr is still dereferenced
in iscsi_tcp_task_xmit() to avoid this call skb_get() after
allocating skb and free the skb in cxgbi_cleanup_task() or
before allocating new skb in cxgbi_conn_alloc_pdu().
Signed-off-by: Varun Prakash <varun@chelsio.com>
---
drivers/scsi/cxgbi/libcxgbi.c | 25 ++++++++++++++++++-------
drivers/scsi/cxgbi/libcxgbi.h | 16 ++++++++--------
2 files changed, 26 insertions(+), 15 deletions(-)
diff --git a/drivers/scsi/cxgbi/libcxgbi.c b/drivers/scsi/cxgbi/libcxgbi.c
index bd7d39e..fb06974 100644
--- a/drivers/scsi/cxgbi/libcxgbi.c
+++ b/drivers/scsi/cxgbi/libcxgbi.c
@@ -1873,6 +1873,11 @@ int cxgbi_conn_alloc_pdu(struct iscsi_task *task, u8 opcode)
tcp_task->dd_data = tdata;
task->hdr = NULL;
+ if (tdata->skb) {
+ kfree_skb(tdata->skb);
+ tdata->skb = NULL;
+ }
+
if (SKB_MAX_HEAD(cdev->skb_tx_rsvd) > (512 * MAX_SKB_FRAGS) &&
(opcode == ISCSI_OP_SCSI_DATA_OUT ||
(opcode == ISCSI_OP_SCSI_CMD &&
@@ -1890,6 +1895,7 @@ int cxgbi_conn_alloc_pdu(struct iscsi_task *task, u8 opcode)
return -ENOMEM;
}
+ skb_get(tdata->skb);
skb_reserve(tdata->skb, cdev->skb_tx_rsvd);
task->hdr = (struct iscsi_hdr *)tdata->skb->data;
task->hdr_max = SKB_TX_ISCSI_PDU_HEADER_MAX; /* BHS + AHS */
@@ -2035,9 +2041,9 @@ int cxgbi_conn_xmit_pdu(struct iscsi_task *task)
unsigned int datalen;
int err;
- if (!skb) {
+ if (!skb || cxgbi_skcb_test_flag(skb, SKCBF_TX_DONE)) {
log_debug(1 << CXGBI_DBG_ISCSI | 1 << CXGBI_DBG_PDU_TX,
- "task 0x%p, skb NULL.\n", task);
+ "task 0x%p, skb 0x%p\n", task, skb);
return 0;
}
@@ -2050,7 +2056,6 @@ int cxgbi_conn_xmit_pdu(struct iscsi_task *task)
}
datalen = skb->data_len;
- tdata->skb = NULL;
/* write ppod first if using ofldq to write ppod */
if (ttinfo->flags & CXGBI_PPOD_INFO_FLAG_VALID) {
@@ -2078,6 +2083,7 @@ int cxgbi_conn_xmit_pdu(struct iscsi_task *task)
pdulen += ISCSI_DIGEST_SIZE;
task->conn->txdata_octets += pdulen;
+ cxgbi_skcb_set_flag(skb, SKCBF_TX_DONE);
return 0;
}
@@ -2086,7 +2092,6 @@ int cxgbi_conn_xmit_pdu(struct iscsi_task *task)
"task 0x%p, skb 0x%p, len %u/%u, %d EAGAIN.\n",
task, skb, skb->len, skb->data_len, err);
/* reset skb to send when we are called again */
- tdata->skb = skb;
return err;
}
@@ -2094,7 +2099,8 @@ int cxgbi_conn_xmit_pdu(struct iscsi_task *task)
"itt 0x%x, skb 0x%p, len %u/%u, xmit err %d.\n",
task->itt, skb, skb->len, skb->data_len, err);
- kfree_skb(skb);
+ __kfree_skb(tdata->skb);
+ tdata->skb = NULL;
iscsi_conn_printk(KERN_ERR, task->conn, "xmit err %d.\n", err);
iscsi_conn_failure(task->conn, ISCSI_ERR_XMIT_FAILED);
@@ -2113,8 +2119,10 @@ void cxgbi_cleanup_task(struct iscsi_task *task)
tcp_task->dd_data = NULL;
/* never reached the xmit task callout */
- if (tdata->skb)
- __kfree_skb(tdata->skb);
+ if (tdata->skb) {
+ kfree_skb(tdata->skb);
+ tdata->skb = NULL;
+ }
task_release_itt(task, task->hdr_itt);
memset(tdata, 0, sizeof(*tdata));
@@ -2714,6 +2722,9 @@ EXPORT_SYMBOL_GPL(cxgbi_attr_is_visible);
static int __init libcxgbi_init_module(void)
{
pr_info("%s", version);
+
+ BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, cb) <
+ sizeof(struct cxgbi_skb_cb));
return 0;
}
diff --git a/drivers/scsi/cxgbi/libcxgbi.h b/drivers/scsi/cxgbi/libcxgbi.h
index 18e0ea8..239462a 100644
--- a/drivers/scsi/cxgbi/libcxgbi.h
+++ b/drivers/scsi/cxgbi/libcxgbi.h
@@ -195,7 +195,8 @@ struct cxgbi_skb_rx_cb {
};
struct cxgbi_skb_tx_cb {
- void *l2t;
+ void *handle;
+ void *arp_err_handler;
struct sk_buff *wr_next;
};
@@ -203,6 +204,7 @@ enum cxgbi_skcb_flags {
SKCBF_TX_NEED_HDR, /* packet needs a header */
SKCBF_TX_MEM_WRITE, /* memory write */
SKCBF_TX_FLAG_COMPL, /* wr completion flag */
+ SKCBF_TX_DONE, /* skb tx done */
SKCBF_RX_COALESCED, /* received whole pdu */
SKCBF_RX_HDR, /* received pdu header */
SKCBF_RX_DATA, /* received pdu payload */
@@ -215,13 +217,13 @@ enum cxgbi_skcb_flags {
};
struct cxgbi_skb_cb {
- unsigned char ulp_mode;
- unsigned long flags;
- unsigned int seq;
union {
struct cxgbi_skb_rx_cb rx;
struct cxgbi_skb_tx_cb tx;
};
+ unsigned char ulp_mode;
+ unsigned long flags;
+ unsigned int seq;
};
#define CXGBI_SKB_CB(skb) ((struct cxgbi_skb_cb *)&((skb)->cb[0]))
@@ -374,11 +376,9 @@ static inline void cxgbi_sock_enqueue_wr(struct cxgbi_sock *csk,
cxgbi_skcb_tx_wr_next(skb) = NULL;
/*
* We want to take an extra reference since both us and the driver
- * need to free the packet before it's really freed. We know there's
- * just one user currently so we use atomic_set rather than skb_get
- * to avoid the atomic op.
+ * need to free the packet before it's really freed.
*/
- atomic_set(&skb->users, 2);
+ skb_get(skb);
if (!csk->wr_pending_head)
csk->wr_pending_head = skb;
--
2.0.2
next reply other threads:[~2017-05-16 13:54 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-16 13:53 Varun Prakash [this message]
2017-05-19 1:36 ` [PATCH] scsi: libcxgbi: fix skb use after free Martin K. Petersen
2017-05-24 2:39 ` Martin K. Petersen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1494942824-2252-1-git-send-email-varun@chelsio.com \
--to=varun@chelsio.com \
--cc=indranil@chelsio.com \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox