From: John Garry <john.garry@huawei.com>
To: martin.petersen@oracle.com, jejb@linux.vnet.ibm.com
Cc: linuxarm@huawei.com, arnd@arndb.de, linux-scsi@vger.kernel.org,
linux-kernel@vger.kernel.org, hch@infradead.org,
John Garry <john.garry@huawei.com>,
Xiang Chen <chenxiang66@hisilicon.com>
Subject: [PATCH v5 10/23] scsi: hisi_sas: add initialisation for v3 pci-based controller
Date: Fri, 9 Jun 2017 22:16:23 +0800 [thread overview]
Message-ID: <1497017796-105067-11-git-send-email-john.garry@huawei.com> (raw)
In-Reply-To: <1497017796-105067-1-git-send-email-john.garry@huawei.com>
Add the code to initialise the controller which is based on pci
device in hisi_sas_v3_hw.c
The core controller routines are still in hisi_sas_main.c; some
common initialisation functions are also exported from
hisi_sas_main.c
For pci-based controller, the device properties, like
phy count and sas address are read from the firmware,
same as platform device-based controller.
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
---
drivers/scsi/hisi_sas/hisi_sas.h | 6 ++
drivers/scsi/hisi_sas/hisi_sas_main.c | 18 ++--
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 154 +++++++++++++++++++++++++++++++++
3 files changed, 172 insertions(+), 6 deletions(-)
diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index c1f6669..e89f6ae 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -366,6 +366,12 @@ struct hisi_sas_command_table_ssp {
struct hisi_sas_command_table_stp stp;
};
+extern struct scsi_transport_template *hisi_sas_stt;
+extern struct scsi_host_template *hisi_sas_sht;
+
+extern void hisi_sas_init_add(struct hisi_hba *hisi_hba);
+extern int hisi_sas_alloc(struct hisi_hba *hisi_hba, struct Scsi_Host *shost);
+extern void hisi_sas_free(struct hisi_hba *hisi_hba);
extern u8 hisi_sas_get_ata_protocol(u8 cmd, int direction);
extern struct hisi_sas_port *to_hisi_sas_port(struct asd_sas_port *sas_port);
extern void hisi_sas_sata_done(struct sas_task *task,
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 1a6adf7..92b7068 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -1472,9 +1472,10 @@ void hisi_sas_rescan_topology(struct hisi_hba *hisi_hba, u32 old_state,
}
EXPORT_SYMBOL_GPL(hisi_sas_rescan_topology);
-static struct scsi_transport_template *hisi_sas_stt;
+struct scsi_transport_template *hisi_sas_stt;
+EXPORT_SYMBOL_GPL(hisi_sas_stt);
-static struct scsi_host_template hisi_sas_sht = {
+static struct scsi_host_template _hisi_sas_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.queuecommand = sas_queuecommand,
@@ -1494,6 +1495,8 @@ void hisi_sas_rescan_topology(struct hisi_hba *hisi_hba, u32 old_state,
.target_destroy = sas_target_destroy,
.ioctl = sas_ioctl,
};
+struct scsi_host_template *hisi_sas_sht = &_hisi_sas_sht;
+EXPORT_SYMBOL_GPL(hisi_sas_sht);
static struct sas_domain_function_template hisi_sas_transport_ops = {
.lldd_dev_found = hisi_sas_dev_found,
@@ -1541,7 +1544,7 @@ void hisi_sas_init_mem(struct hisi_hba *hisi_hba)
}
EXPORT_SYMBOL_GPL(hisi_sas_init_mem);
-static int hisi_sas_alloc(struct hisi_hba *hisi_hba, struct Scsi_Host *shost)
+int hisi_sas_alloc(struct hisi_hba *hisi_hba, struct Scsi_Host *shost)
{
struct device *dev = hisi_hba->dev;
int i, s, max_command_entries = hisi_hba->hw->max_command_entries;
@@ -1660,8 +1663,9 @@ static int hisi_sas_alloc(struct hisi_hba *hisi_hba, struct Scsi_Host *shost)
err_out:
return -ENOMEM;
}
+EXPORT_SYMBOL_GPL(hisi_sas_alloc);
-static void hisi_sas_free(struct hisi_hba *hisi_hba)
+void hisi_sas_free(struct hisi_hba *hisi_hba)
{
struct device *dev = hisi_hba->dev;
int i, s, max_command_entries = hisi_hba->hw->max_command_entries;
@@ -1716,6 +1720,7 @@ static void hisi_sas_free(struct hisi_hba *hisi_hba)
if (hisi_hba->wq)
destroy_workqueue(hisi_hba->wq);
}
+EXPORT_SYMBOL_GPL(hisi_sas_free);
static void hisi_sas_rst_work_handler(struct work_struct *work)
{
@@ -1801,7 +1806,7 @@ static struct Scsi_Host *hisi_sas_shost_alloc(struct platform_device *pdev,
struct hisi_hba *hisi_hba;
struct device *dev = &pdev->dev;
- shost = scsi_host_alloc(&hisi_sas_sht, sizeof(*hisi_hba));
+ shost = scsi_host_alloc(hisi_sas_sht, sizeof(*hisi_hba));
if (!shost) {
dev_err(dev, "scsi host alloc failed\n");
return NULL;
@@ -1843,7 +1848,7 @@ static struct Scsi_Host *hisi_sas_shost_alloc(struct platform_device *pdev,
return NULL;
}
-static void hisi_sas_init_add(struct hisi_hba *hisi_hba)
+void hisi_sas_init_add(struct hisi_hba *hisi_hba)
{
int i;
@@ -1852,6 +1857,7 @@ static void hisi_sas_init_add(struct hisi_hba *hisi_hba)
hisi_hba->sas_addr,
SAS_ADDR_SIZE);
}
+EXPORT_SYMBOL_GPL(hisi_sas_init_add);
int hisi_sas_probe(struct platform_device *pdev,
const struct hisi_sas_hw *hw)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index cf72577..e9a9fb0 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -11,14 +11,168 @@
#include "hisi_sas.h"
#define DRV_NAME "hisi_sas_v3_hw"
+static const struct hisi_sas_hw hisi_sas_v3_hw = {
+};
+
+static struct Scsi_Host *
+hisi_sas_shost_alloc_pci(struct pci_dev *pdev)
+{
+ struct Scsi_Host *shost;
+ struct hisi_hba *hisi_hba;
+ struct device *dev = &pdev->dev;
+
+ shost = scsi_host_alloc(hisi_sas_sht, sizeof(*hisi_hba));
+ if (!shost)
+ goto err_out;
+ hisi_hba = shost_priv(shost);
+
+ hisi_hba->hw = &hisi_sas_v3_hw;
+ hisi_hba->pci_dev = pdev;
+ hisi_hba->dev = dev;
+ hisi_hba->shost = shost;
+ SHOST_TO_SAS_HA(shost) = &hisi_hba->sha;
+
+ init_timer(&hisi_hba->timer);
+
+ if (hisi_sas_get_fw_info(hisi_hba) < 0)
+ goto err_out;
+
+ if (hisi_sas_alloc(hisi_hba, shost)) {
+ hisi_sas_free(hisi_hba);
+ goto err_out;
+ }
+
+ return shost;
+err_out:
+ dev_err(dev, "shost alloc failed\n");
+ return NULL;
+}
+
static int
hisi_sas_v3_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
+ struct Scsi_Host *shost;
+ struct hisi_hba *hisi_hba;
+ struct device *dev = &pdev->dev;
+ struct asd_sas_phy **arr_phy;
+ struct asd_sas_port **arr_port;
+ struct sas_ha_struct *sha;
+ int rc, phy_nr, port_nr, i;
+
+ rc = pci_enable_device(pdev);
+ if (rc)
+ goto err_out;
+
+ pci_set_master(pdev);
+
+ rc = pci_request_regions(pdev, DRV_NAME);
+ if (rc)
+ goto err_out_disable_device;
+
+ if ((pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) != 0) ||
+ (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)) != 0)) {
+ if ((pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0) ||
+ (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)) != 0)) {
+ dev_err(dev, "No usable DMA addressing method\n");
+ rc = -EIO;
+ goto err_out_regions;
+ }
+ }
+
+ shost = hisi_sas_shost_alloc_pci(pdev);
+ if (!shost) {
+ rc = -ENOMEM;
+ goto err_out_regions;
+ }
+
+ sha = SHOST_TO_SAS_HA(shost);
+ hisi_hba = shost_priv(shost);
+ dev_set_drvdata(dev, sha);
+
+ hisi_hba->regs = pcim_iomap(pdev, 5, 0);
+ if (!hisi_hba->regs) {
+ dev_err(dev, "cannot map register.\n");
+ rc = -ENOMEM;
+ goto err_out_ha;
+ }
+
+ phy_nr = port_nr = hisi_hba->n_phy;
+
+ arr_phy = devm_kcalloc(dev, phy_nr, sizeof(void *), GFP_KERNEL);
+ arr_port = devm_kcalloc(dev, port_nr, sizeof(void *), GFP_KERNEL);
+ if (!arr_phy || !arr_port) {
+ rc = -ENOMEM;
+ goto err_out_ha;
+ }
+
+ sha->sas_phy = arr_phy;
+ sha->sas_port = arr_port;
+ sha->core.shost = shost;
+ sha->lldd_ha = hisi_hba;
+
+ shost->transportt = hisi_sas_stt;
+ shost->max_id = HISI_SAS_MAX_DEVICES;
+ shost->max_lun = ~0;
+ shost->max_channel = 1;
+ shost->max_cmd_len = 16;
+ shost->sg_tablesize = min_t(u16, SG_ALL, HISI_SAS_SGE_PAGE_CNT);
+ shost->can_queue = hisi_hba->hw->max_command_entries;
+ shost->cmd_per_lun = hisi_hba->hw->max_command_entries;
+
+ sha->sas_ha_name = DRV_NAME;
+ sha->dev = dev;
+ sha->lldd_module = THIS_MODULE;
+ sha->sas_addr = &hisi_hba->sas_addr[0];
+ sha->num_phys = hisi_hba->n_phy;
+ sha->core.shost = hisi_hba->shost;
+
+ for (i = 0; i < hisi_hba->n_phy; i++) {
+ sha->sas_phy[i] = &hisi_hba->phy[i].sas_phy;
+ sha->sas_port[i] = &hisi_hba->port[i].sas_port;
+ }
+
+ hisi_sas_init_add(hisi_hba);
+
+ rc = scsi_add_host(shost, dev);
+ if (rc)
+ goto err_out_ha;
+
+ rc = sas_register_ha(sha);
+ if (rc)
+ goto err_out_register_ha;
+
+ rc = hisi_hba->hw->hw_init(hisi_hba);
+ if (rc)
+ goto err_out_register_ha;
+
+ scsi_scan_host(shost);
+
return 0;
+
+err_out_register_ha:
+ scsi_remove_host(shost);
+err_out_ha:
+ kfree(shost);
+err_out_regions:
+ pci_release_regions(pdev);
+err_out_disable_device:
+ pci_disable_device(pdev);
+err_out:
+ return rc;
}
static void hisi_sas_v3_remove(struct pci_dev *pdev)
{
+ struct device *dev = &pdev->dev;
+ struct sas_ha_struct *sha = dev_get_drvdata(dev);
+ struct hisi_hba *hisi_hba = sha->lldd_ha;
+
+ sas_unregister_ha(sha);
+ sas_remove_host(sha->core.shost);
+
+ hisi_sas_free(hisi_hba);
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
}
enum {
--
1.9.1
next prev parent reply other threads:[~2017-06-09 14:16 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-09 14:16 [PATCH v5 00/23] hisi_sas: hip08 support John Garry
2017-06-09 14:16 ` [PATCH v5 01/23] scsi: hisi_sas: fix timeout check in hisi_sas_internal_task_abort() John Garry
2017-06-09 14:16 ` [PATCH v5 02/23] scsi: hisi_sas: define hisi_sas_device.device_id as int John Garry
2017-06-09 14:16 ` [PATCH v5 03/23] scsi: hisi_sas: optimise the usage of hisi_hba.lock John Garry
2017-06-10 20:44 ` kbuild test robot
2017-06-12 8:26 ` John Garry
2017-06-12 9:45 ` Arnd Bergmann
2017-06-12 10:24 ` John Garry
2017-06-09 14:16 ` [PATCH v5 04/23] scsi: hisi_sas: relocate get_ata_protocol() John Garry
2017-06-09 14:16 ` [PATCH v5 05/23] scsi: hisi_sas: relocate sata_done_v2_hw() John Garry
2017-06-09 14:16 ` [PATCH v5 06/23] scsi: hisi_sas: relocate get_ncq_tag_v2_hw() John Garry
2017-06-09 14:16 ` [PATCH v5 07/23] scsi: hisi_sas: add pci_dev in hisi_hba struct John Garry
2017-06-09 14:16 ` [PATCH v5 08/23] scsi: hisi_sas: create hisi_sas_get_fw_info() John Garry
2017-06-09 14:16 ` [PATCH v5 09/23] scsi: hisi_sas: add skeleton v3 hw driver John Garry
2017-06-09 14:16 ` John Garry [this message]
2017-06-09 14:16 ` [PATCH v5 11/23] scsi: hisi_sas: add v3 hw init John Garry
2017-06-09 14:16 ` [PATCH v5 12/23] scsi: hisi_sas: add v3 hw PHY init John Garry
2017-06-09 14:16 ` [PATCH v5 13/23] scsi: hisi_sas: add phy up/down/bcast and channel ISR John Garry
2017-06-09 14:16 ` [PATCH v5 14/23] scsi: hisi_sas: add v3 cq interrupt handler John Garry
2017-06-09 14:16 ` [PATCH v5 15/23] scsi: hisi_sas: add v3 code to send SSP frame John Garry
2017-06-09 14:16 ` [PATCH v5 16/23] scsi: hisi_sas: add v3 code to send SMP frame John Garry
2017-06-09 14:16 ` [PATCH v5 17/23] scsi: hisi_sas: add v3 code to send ATA frame John Garry
2017-06-09 14:16 ` [PATCH v5 18/23] scsi: hisi_sas: add v3 code for itct setup and free John Garry
2017-06-09 14:16 ` [PATCH v5 19/23] scsi: hisi_sas: add v3 code to send internal abort command John Garry
2017-06-09 14:16 ` [PATCH v5 20/23] scsi: hisi_sas: add get_wideport_bitmap_v3_hw() John Garry
2017-06-09 14:16 ` [PATCH v5 21/23] scsi: hisi_sas: Add v3 code to support ECC and AXI bus fatal error John Garry
2017-06-09 14:16 ` [PATCH v5 22/23] scsi: hisi_sas: add v3 code to fill some more hw function pointers John Garry
2017-06-09 14:16 ` [PATCH v5 23/23] scsi: hisi_sas: modify internal abort dev flow for v3 hw John Garry
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1497017796-105067-11-git-send-email-john.garry@huawei.com \
--to=john.garry@huawei.com \
--cc=arnd@arndb.de \
--cc=chenxiang66@hisilicon.com \
--cc=hch@infradead.org \
--cc=jejb@linux.vnet.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=linuxarm@huawei.com \
--cc=martin.petersen@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).