[PATCH 1/2] scsi: remove various unused blist flags

[PATCH 1/2] scsi: remove various unused blist flags

[Christoph Hellwig]

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 drivers/scsi/scsi_scan.c    | 25 ++-----------------------
 include/scsi/scsi_devinfo.h |  9 ---------
 2 files changed, 2 insertions(+), 32 deletions(-)

diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index e6de4eee97a3..3c4403210a1a 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -656,8 +656,6 @@ static int scsi_probe_lun(struct scsi_device *sdev, unsigned char *inq_result,
 		if (pass == 1) {
 			if (BLIST_INQUIRY_36 & *bflags)
 				next_inquiry_len = 36;
-			else if (BLIST_INQUIRY_58 & *bflags)
-				next_inquiry_len = 58;
 			else if (sdev->inquiry_len)
 				next_inquiry_len = sdev->inquiry_len;
 			else
@@ -927,15 +925,6 @@ static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result,
 
 	sdev->use_10_for_rw = 1;
 
-	if (*bflags & BLIST_MS_SKIP_PAGE_08)
-		sdev->skip_ms_page_8 = 1;
-
-	if (*bflags & BLIST_MS_SKIP_PAGE_3F)
-		sdev->skip_ms_page_3f = 1;
-
-	if (*bflags & BLIST_USE_10_BYTE_MS)
-		sdev->use_10_for_ms = 1;
-
 	/* some devices don't like REPORT SUPPORTED OPERATION CODES
 	 * and will simply timeout causing sd_mod init to take a very
 	 * very long time */
@@ -957,9 +946,6 @@ static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result,
 		return SCSI_SCAN_NO_RESPONSE;
 	}
 
-	if (*bflags & BLIST_MS_192_BYTES_FOR_3F)
-		sdev->use_192_bytes_for_3f = 1;
-
 	if (*bflags & BLIST_NOT_LOCKABLE)
 		sdev->lockable = 0;
 
@@ -969,9 +955,6 @@ static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result,
 	if (*bflags & BLIST_NO_DIF)
 		sdev->no_dif = 1;
 
-	if (*bflags & BLIST_SYNC_ALUA)
-		sdev->synchronous_alua = 1;
-
 	sdev->eh_timeout = SCSI_DEFAULT_EH_TIMEOUT;
 
 	if (*bflags & BLIST_TRY_VPD_PAGES)
@@ -1109,7 +1092,7 @@ static int scsi_probe_and_add_lun(struct scsi_target *starget,
 	/*
 	 * result contains valid SCSI INQUIRY data.
 	 */
-	if (((result[0] >> 5) == 3) && !(bflags & BLIST_ATTACH_PQ3)) {
+	if ((result[0] >> 5) == 3) {
 		/*
 		 * For a Peripheral qualifier 3 (011b), the SCSI
 		 * spec says: The device server is not capable of
@@ -1267,11 +1250,7 @@ static void scsi_sequential_lun_scan(struct scsi_target *starget,
 	 */
 	if (scsi_level < SCSI_3 && !(bflags & BLIST_LARGELUN))
 		max_dev_lun = min(8U, max_dev_lun);
-
-	/*
-	 * Stop scanning at 255 unless BLIST_SCSI3LUN
-	 */
-	if (!(bflags & BLIST_SCSI3LUN))
+	else
 		max_dev_lun = min(256U, max_dev_lun);
 
 	/*
diff --git a/include/scsi/scsi_devinfo.h b/include/scsi/scsi_devinfo.h
index 9f750cb63b03..9592570e092a 100644
--- a/include/scsi/scsi_devinfo.h
+++ b/include/scsi/scsi_devinfo.h
@@ -15,12 +15,7 @@
 #define BLIST_ISROM     	0x100	/* Treat as (removable) CD-ROM */
 #define BLIST_LARGELUN		0x200	/* LUNs past 7 on a SCSI-2 device */
 #define BLIST_INQUIRY_36	0x400	/* override additional length field */
-#define BLIST_INQUIRY_58	0x800	/* ... for broken inquiry responses */
 #define BLIST_NOSTARTONADD	0x1000	/* do not do automatic start on add */
-#define BLIST_MS_SKIP_PAGE_08	0x2000	/* do not send ms page 0x08 */
-#define BLIST_MS_SKIP_PAGE_3F	0x4000	/* do not send ms page 0x3f */
-#define BLIST_USE_10_BYTE_MS	0x8000	/* use 10 byte ms before 6 byte ms */
-#define BLIST_MS_192_BYTES_FOR_3F	0x10000	/*  192 byte ms page 0x3f request */
 #define BLIST_REPORTLUN2	0x20000	/* try REPORT_LUNS even for SCSI-2 devs
  					   (if HBA supports more than 8 LUNs) */
 #define BLIST_NOREPORTLUN	0x40000	/* don't try REPORT_LUNS scan (SCSI-3 devs) */
@@ -29,14 +24,10 @@
 #define BLIST_SELECT_NO_ATN	0x200000 /* select without ATN */
 #define BLIST_RETRY_HWERROR	0x400000 /* retry HARDWARE_ERROR */
 #define BLIST_MAX_512		0x800000 /* maximum 512 sector cdb length */
-#define BLIST_ATTACH_PQ3	0x1000000 /* Scan: Attach to PQ3 devices */
 #define BLIST_NO_DIF		0x2000000 /* Disable T10 PI (DIF) */
 #define BLIST_SKIP_VPD_PAGES	0x4000000 /* Ignore SBC-3 VPD pages */
-#define BLIST_SCSI3LUN		0x8000000 /* Scan more than 256 LUNs
-					     for sequential scan */
 #define BLIST_TRY_VPD_PAGES	0x10000000 /* Attempt to read VPD pages */
 #define BLIST_NO_RSOC		0x20000000 /* don't try to issue RSOC */
 #define BLIST_MAX_1024		0x40000000 /* maximum 1024 sector cdb length */
-#define BLIST_SYNC_ALUA		0x80000000 /* Synchronous ALUA commands */
 
 #endif
-- 
2.11.0

[PATCH 2/2] scsi_dh_alua: remove synchronous STPG support

[Christoph Hellwig]

Since 9c58b395 ("scsi: scsi_devinfo: remove synchronous ALUA for
NETAPP devices") this code is unused.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 drivers/scsi/device_handler/scsi_dh_alua.c | 27 +++++----------------------
 include/scsi/scsi_device.h                 |  1 -
 2 files changed, 5 insertions(+), 23 deletions(-)

diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c
index c01b47e5b55a..0962fd544401 100644
--- a/drivers/scsi/device_handler/scsi_dh_alua.c
+++ b/drivers/scsi/device_handler/scsi_dh_alua.c
@@ -57,7 +57,6 @@
 /* device handler flags */
 #define ALUA_OPTIMIZE_STPG		0x01
 #define ALUA_RTPG_EXT_HDR_UNSUPP	0x02
-#define ALUA_SYNC_STPG			0x04
 /* State machine flags */
 #define ALUA_PG_RUN_RTPG		0x10
 #define ALUA_PG_RUN_STPG		0x20
@@ -70,7 +69,6 @@ MODULE_PARM_DESC(optimize_stpg, "Allow use of a non-optimized path, rather than
 static LIST_HEAD(port_group_list);
 static DEFINE_SPINLOCK(port_group_lock);
 static struct workqueue_struct *kaluad_wq;
-static struct workqueue_struct *kaluad_sync_wq;
 
 struct alua_port_group {
 	struct kref		kref;
@@ -380,8 +378,6 @@ static int alua_check_vpd(struct scsi_device *sdev, struct alua_dh_data *h,
 	}
 
 	spin_lock_irqsave(&pg->lock, flags);
-	if (sdev->synchronous_alua)
-		pg->flags |= ALUA_SYNC_STPG;
 	if (pg_updated)
 		list_add_rcu(&h->node, &pg->dh_list);
 	spin_unlock_irqrestore(&pg->lock, flags);
@@ -785,7 +781,6 @@ static void alua_rtpg_work(struct work_struct *work)
 	int err = SCSI_DH_OK;
 	struct alua_queue_data *qdata, *tmp;
 	unsigned long flags;
-	struct workqueue_struct *alua_wq = kaluad_wq;
 
 	spin_lock_irqsave(&pg->lock, flags);
 	sdev = pg->rtpg_sdev;
@@ -796,8 +791,6 @@ static void alua_rtpg_work(struct work_struct *work)
 		kref_put(&pg->kref, release_port_group);
 		return;
 	}
-	if (pg->flags & ALUA_SYNC_STPG)
-		alua_wq = kaluad_sync_wq;
 	pg->flags |= ALUA_PG_RUNNING;
 	if (pg->flags & ALUA_PG_RUN_RTPG) {
 		int state = pg->state;
@@ -810,7 +803,7 @@ static void alua_rtpg_work(struct work_struct *work)
 				pg->flags &= ~ALUA_PG_RUNNING;
 				pg->flags |= ALUA_PG_RUN_RTPG;
 				spin_unlock_irqrestore(&pg->lock, flags);
-				queue_delayed_work(alua_wq, &pg->rtpg_work,
+				queue_delayed_work(kaluad_wq, &pg->rtpg_work,
 						   pg->interval * HZ);
 				return;
 			}
@@ -822,7 +815,7 @@ static void alua_rtpg_work(struct work_struct *work)
 			pg->flags &= ~ALUA_PG_RUNNING;
 			pg->flags |= ALUA_PG_RUN_RTPG;
 			spin_unlock_irqrestore(&pg->lock, flags);
-			queue_delayed_work(alua_wq, &pg->rtpg_work,
+			queue_delayed_work(kaluad_wq, &pg->rtpg_work,
 					   pg->interval * HZ);
 			return;
 		}
@@ -839,7 +832,7 @@ static void alua_rtpg_work(struct work_struct *work)
 			pg->interval = 0;
 			pg->flags &= ~ALUA_PG_RUNNING;
 			spin_unlock_irqrestore(&pg->lock, flags);
-			queue_delayed_work(alua_wq, &pg->rtpg_work,
+			queue_delayed_work(kaluad_wq, &pg->rtpg_work,
 					   pg->interval * HZ);
 			return;
 		}
@@ -874,8 +867,6 @@ static bool alua_rtpg_queue(struct alua_port_group *pg,
 {
 	int start_queue = 0;
 	unsigned long flags;
-	struct workqueue_struct *alua_wq = kaluad_wq;
-
 	if (WARN_ON_ONCE(!pg) || scsi_device_get(sdev))
 		return false;
 
@@ -900,12 +891,10 @@ static bool alua_rtpg_queue(struct alua_port_group *pg,
 		}
 	}
 
-	if (pg->flags & ALUA_SYNC_STPG)
-		alua_wq = kaluad_sync_wq;
 	spin_unlock_irqrestore(&pg->lock, flags);
 
 	if (start_queue) {
-		if (queue_delayed_work(alua_wq, &pg->rtpg_work,
+		if (queue_delayed_work(kaluad_wq, &pg->rtpg_work,
 				msecs_to_jiffies(ALUA_RTPG_DELAY_MSECS)))
 			sdev = NULL;
 		else
@@ -1166,16 +1155,11 @@ static int __init alua_init(void)
 		/* Temporary failure, bypass */
 		return SCSI_DH_DEV_TEMP_BUSY;
 	}
-	kaluad_sync_wq = create_workqueue("kaluad_sync");
-	if (!kaluad_sync_wq) {
-		destroy_workqueue(kaluad_wq);
-		return SCSI_DH_DEV_TEMP_BUSY;
-	}
+
 	r = scsi_register_device_handler(&alua_dh);
 	if (r != 0) {
 		printk(KERN_ERR "%s: Failed to register scsi device handler",
 			ALUA_DH_NAME);
-		destroy_workqueue(kaluad_sync_wq);
 		destroy_workqueue(kaluad_wq);
 	}
 	return r;
@@ -1184,7 +1168,6 @@ static int __init alua_init(void)
 static void __exit alua_exit(void)
 {
 	scsi_unregister_device_handler(&alua_dh);
-	destroy_workqueue(kaluad_sync_wq);
 	destroy_workqueue(kaluad_wq);
 }
 
diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
index d13bc80825b1..d3fb98f72a03 100644
--- a/include/scsi/scsi_device.h
+++ b/include/scsi/scsi_device.h
@@ -181,7 +181,6 @@ struct scsi_device {
 	unsigned no_dif:1;	/* T10 PI (DIF) should be disabled */
 	unsigned broken_fua:1;		/* Don't set FUA bit */
 	unsigned lun_in_cdb:1;		/* Store LUN bits in CDB[1] */
-	unsigned synchronous_alua:1;	/* Synchronous ALUA commands */
 
 	atomic_t disk_events_disable_depth; /* disable depth for disk events */
 
-- 
2.11.0

Re: [PATCH 2/2] scsi_dh_alua: remove synchronous STPG support

[Bart Van Assche]

On Mon, 2017-06-19 at 14:27 +0200, Christoph Hellwig wrote:
> Since 9c58b395 ("scsi: scsi_devinfo: remove synchronous ALUA for
> NETAPP devices") this code is unused.

Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>

Re: [PATCH 2/2] scsi_dh_alua: remove synchronous STPG support

[Martin K. Petersen]

Christoph,

> Since 9c58b395 ("scsi: scsi_devinfo: remove synchronous ALUA for
> NETAPP devices") this code is unused.

Applied to 4.13/scsi-queue.

-- 
Martin K. Petersen	Oracle Linux Engineering

Re: [PATCH 1/2] scsi: remove various unused blist flags

[Bart Van Assche]

On Mon, 2017-06-19 at 14:27 +0200, Christoph Hellwig wrote:
> [ ... ]

Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>

Re: [PATCH 1/2] scsi: remove various unused blist flags

[Martin K. Petersen]

Christoph,

Applied to 4.13/scsi-queue.

-- 
Martin K. Petersen	Oracle Linux Engineering