From: Hannes Reinecke <hare@suse.de>
To: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>,
James Bottomley <james.bottomley@hansenpartnership.com>,
Sumit Saxena <sumit.saxena@broadcom.com>,
Kashyap Desai <kashyap.desai@broadcom.com>,
megaraidlinux.pdl@broadcom.com, linux-scsi@vger.kernel.org,
Hannes Reinecke <hare@suse.de>
Subject: [PATCH] megaraid_sas: Fallback to older scanning if no disks are found
Date: Tue, 15 Aug 2017 14:05:40 +0200 [thread overview]
Message-ID: <1502798740-69337-1-git-send-email-hare@suse.de> (raw)
commit 21c9e160a51383d4cb0b882398534b0c95c0cc3b implemented a
new driver lookup using the MR_DCMD_LD_LIST_QUERY firmware command.
However, this command might not work properly on older firmware,
causing the command to return no drives instead of an error.
This causes a regression on older firmware as the driver will
no longer detect any drives.
This patch checks if MR_DCMD_LD_LIST_QUERY return no drives,
and falls back to the original method if so.
Signed-off-by: Hannes Reinecke <hare@suse.de>
---
drivers/scsi/megaraid/megaraid_sas_base.c | 29 +++++++++++++++++++++++------
1 file changed, 23 insertions(+), 6 deletions(-)
diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c
index 39b08fc..a1cf2c3 100644
--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -4502,7 +4502,6 @@ int megasas_alloc_cmds(struct megasas_instance *instance)
dev_info(&instance->pdev->dev,
"DCMD not supported by firmware - %s %d\n",
__func__, __LINE__);
- ret = megasas_get_ld_list(instance);
break;
case DCMD_TIMEOUT:
switch (dcmd_timeout_ocr_possible(instance)) {
@@ -4530,6 +4529,14 @@ int megasas_alloc_cmds(struct megasas_instance *instance)
break;
case DCMD_SUCCESS:
tgtid_count = le32_to_cpu(ci->count);
+ /*
+ * Some older firmware return '0' if the LD LIST QUERY
+ * command is not supported.
+ */
+ if (tgtid_count == 0) {
+ ret = DCMD_FAILED;
+ break;
+ }
if ((tgtid_count > (instance->fw_supported_vd_count)))
break;
@@ -5146,7 +5153,7 @@ static int megasas_init_fw(struct megasas_instance *instance)
struct megasas_register_set __iomem *reg_set;
struct megasas_ctrl_info *ctrl_info = NULL;
unsigned long bar_list;
- int i, j, loop, fw_msix_count = 0;
+ int i, j, loop, fw_msix_count = 0, ret;
struct IOV_111 *iovPtr;
struct fusion_context *fusion;
@@ -5384,8 +5391,11 @@ static int megasas_init_fw(struct megasas_instance *instance)
}
}
- if (megasas_ld_list_query(instance,
- MR_LD_QUERY_TYPE_EXPOSED_TO_HOST))
+ ret = megasas_ld_list_query(instance,
+ MR_LD_QUERY_TYPE_EXPOSED_TO_HOST);
+ if (ret == DCMD_FAILED)
+ ret = megasas_get_ld_list(instance);
+ if (ret)
goto fail_get_ld_pd_list;
/*
@@ -7426,8 +7436,12 @@ static inline void megasas_remove_scsi_device(struct scsi_device *sdev)
case MR_EVT_LD_DELETED:
case MR_EVT_LD_CREATED:
if (!instance->requestorId ||
- (instance->requestorId && megasas_get_ld_vf_affiliation(instance, 0)))
+ (instance->requestorId &&
+ megasas_get_ld_vf_affiliation(instance, 0))) {
dcmd_ret = megasas_ld_list_query(instance, MR_LD_QUERY_TYPE_EXPOSED_TO_HOST);
+ if (dcmd_ret == DCMD_FAILED)
+ dcmd_ret = megasas_get_ld_list(instance);
+ }
if (dcmd_ret == DCMD_SUCCESS)
doscan = SCAN_VD_CHANNEL;
@@ -7443,8 +7457,11 @@ static inline void megasas_remove_scsi_device(struct scsi_device *sdev)
break;
if (!instance->requestorId ||
- (instance->requestorId && megasas_get_ld_vf_affiliation(instance, 0)))
+ (instance->requestorId && megasas_get_ld_vf_affiliation(instance, 0))) {
dcmd_ret = megasas_ld_list_query(instance, MR_LD_QUERY_TYPE_EXPOSED_TO_HOST);
+ if (dcmd_ret == DCMD_FAILED)
+ dcmd_ret = megasas_get_ld_list(instance);
+ }
if (dcmd_ret != DCMD_SUCCESS)
break;
--
1.8.5.6
next reply other threads:[~2017-08-15 12:05 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-15 12:05 Hannes Reinecke [this message]
2017-08-16 12:29 ` [PATCH] megaraid_sas: Fallback to older scanning if no disks are found Sumit Saxena
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1502798740-69337-1-git-send-email-hare@suse.de \
--to=hare@suse.de \
--cc=hch@lst.de \
--cc=james.bottomley@hansenpartnership.com \
--cc=kashyap.desai@broadcom.com \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=megaraidlinux.pdl@broadcom.com \
--cc=sumit.saxena@broadcom.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox