From: "Ewan D. Milne" <emilne@redhat.com>
To: "Madhani, Madhani" <himanshu.madhani@cavium.com>
Cc: James.Bottomley@HansenPartnership.com,
martin.petersen@oracle.com, linux-scsi@vger.kernel.org
Subject: Re: [PATCH v2 4/5] qla2xxx: Changes to support N2N logins
Date: Fri, 13 Oct 2017 13:01:17 -0400 [thread overview]
Message-ID: <1507914077.24441.106.camel@localhost.localdomain> (raw)
In-Reply-To: <20171013163407.8038-5-himanshu.madhani@cavium.com>
On Fri, 2017-10-13 at 09:34 -0700, Madhani, Madhani wrote:
> From: Duane Grigsby <duane.grigsby@cavium.com>
>
> If we discovered a topology that is N2N then we will issue a login
> to the target. If our WWPN is bigger than the target's WWPN then we
> will initiate login, otherwise we will just wait for the target
> to initiate login.
>
> Signed-off-by: Duane Grigsby <duane.grigsby@cavium.com>
> Signed-off-by: Michael Hernandez <michael.hernandez@cavium.com>
> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
> ---
> drivers/scsi/qla2xxx/qla_def.h | 24 +++++
> drivers/scsi/qla2xxx/qla_fw.h | 4 +-
> drivers/scsi/qla2xxx/qla_gbl.h | 4 +
> drivers/scsi/qla2xxx/qla_init.c | 135 +++++++++++++++++++++++++++-
> drivers/scsi/qla2xxx/qla_iocb.c | 195 +++++++++++++++++++++++++++++++++++++---
> drivers/scsi/qla2xxx/qla_isr.c | 42 ++++++++-
> drivers/scsi/qla2xxx/qla_mbx.c | 76 ++++++++++++++++
> 7 files changed, 459 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
> index f712c0cd46d6..01a9b8971e88 100644
> --- a/drivers/scsi/qla2xxx/qla_def.h
> +++ b/drivers/scsi/qla2xxx/qla_def.h
> @@ -323,6 +323,12 @@ struct els_logo_payload {
> uint8_t wwpn[WWN_SIZE];
> };
>
> +struct els_plogi_payload {
> + uint8_t opcode;
> + uint8_t rsvd[3];
> + uint8_t data[112];
> +};
> +
> struct ct_arg {
> void *iocb;
> u16 nport_handle;
> @@ -358,6 +364,19 @@ struct srb_iocb {
> dma_addr_t els_logo_pyld_dma;
> } els_logo;
> struct {
> +#define ELS_DCMD_PLOGI 0x3
> + uint32_t flags;
> + uint32_t els_cmd;
> + struct completion comp;
> + struct els_plogi_payload *els_plogi_pyld;
> + struct els_plogi_payload *els_resp_pyld;
> + dma_addr_t els_plogi_pyld_dma;
> + dma_addr_t els_resp_pyld_dma;
> + uint32_t fw_status[3];
> + __le16 comp_status;
> + __le16 len;
> + } els_plogi;
> + struct {
> /*
> * Values for flags field below are as
> * defined in tsk_mgmt_entry struct
> @@ -2349,6 +2368,7 @@ typedef struct fc_port {
> uint8_t fc4_type;
> uint8_t fc4f_nvme;
> uint8_t scan_state;
> + uint8_t n2n_flag;
>
> unsigned long last_queue_full;
> unsigned long last_ramp_up;
> @@ -2372,6 +2392,7 @@ typedef struct fc_port {
> u8 iocb[IOCB_SIZE];
> u8 current_login_state;
> u8 last_login_state;
> + struct completion n2n_done;
> } fc_port_t;
>
> #define QLA_FCPORT_SCAN 1
> @@ -4228,6 +4249,9 @@ typedef struct scsi_qla_host {
> wait_queue_head_t fcport_waitQ;
> wait_queue_head_t vref_waitq;
> uint8_t min_link_speed_feat;
> + uint8_t n2n_node_name[WWN_SIZE];
> + uint8_t n2n_port_name[WWN_SIZE];
> + uint16_t n2n_id;
> } scsi_qla_host_t;
>
> struct qla27xx_image_status {
> diff --git a/drivers/scsi/qla2xxx/qla_fw.h b/drivers/scsi/qla2xxx/qla_fw.h
> index bec641aae7b3..d5cef0727e72 100644
> --- a/drivers/scsi/qla2xxx/qla_fw.h
> +++ b/drivers/scsi/qla2xxx/qla_fw.h
> @@ -753,9 +753,7 @@ struct els_entry_24xx {
> uint8_t reserved_2;
>
> uint8_t port_id[3];
> - uint8_t reserved_3;
> -
> - uint16_t reserved_4;
> + uint8_t s_id[3];
>
> uint16_t control_flags; /* Control flags. */
> #define ECF_PAYLOAD_DESCR_MASK (BIT_15|BIT_14|BIT_13)
> diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
> index 46c7822c20fc..1e35e961683f 100644
> --- a/drivers/scsi/qla2xxx/qla_gbl.h
> +++ b/drivers/scsi/qla2xxx/qla_gbl.h
> @@ -45,6 +45,8 @@ extern int qla2x00_fabric_login(scsi_qla_host_t *, fc_port_t *, uint16_t *);
> extern int qla2x00_local_device_login(scsi_qla_host_t *, fc_port_t *);
>
> extern int qla24xx_els_dcmd_iocb(scsi_qla_host_t *, int, port_id_t);
> +extern int qla24xx_els_dcmd2_iocb(scsi_qla_host_t *, int, fc_port_t *,
> + port_id_t);
>
> extern void qla2x00_update_fcports(scsi_qla_host_t *);
>
> @@ -487,6 +489,8 @@ int qla24xx_gidlist_wait(struct scsi_qla_host *, void *, dma_addr_t,
> uint16_t *);
> int __qla24xx_parse_gpdb(struct scsi_qla_host *, fc_port_t *,
> struct port_database_24xx *);
> +int qla24xx_get_port_login_templ(scsi_qla_host_t *, dma_addr_t,
> + void *, uint16_t);
>
> extern int qla27xx_get_zio_threshold(scsi_qla_host_t *, uint16_t *);
> extern int qla27xx_set_zio_threshold(scsi_qla_host_t *, uint16_t);
> diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
> index 4c53199db371..b2a391f93775 100644
> --- a/drivers/scsi/qla2xxx/qla_init.c
> +++ b/drivers/scsi/qla2xxx/qla_init.c
> @@ -1433,6 +1433,14 @@ qla24xx_handle_prli_done_event(struct scsi_qla_host *vha, struct event_arg *ea)
> qla24xx_post_gpdb_work(vha, ea->fcport, 0);
> break;
> default:
> + if (ea->fcport->n2n_flag) {
> + ql_dbg(ql_dbg_disc, vha, 0x2118,
> + "%s %d %8phC post fc4 prli\n",
> + __func__, __LINE__, ea->fcport->port_name);
> + ea->fcport->fc4f_nvme = 0;
> + ea->fcport->n2n_flag = 0;
> + qla24xx_post_prli_work(vha, ea->fcport);
> + }
> ql_dbg(ql_dbg_disc, vha, 0x2119,
> "%s %d %8phC unhandle event of %x\n",
> __func__, __LINE__, ea->fcport->port_name, ea->data[0]);
> @@ -4366,7 +4374,109 @@ qla2x00_configure_loop(scsi_qla_host_t *vha)
> return (rval);
> }
>
> +/*
> + * N2N Login
> + * Updates Fibre Channel Device Database with local loop devices.
> + *
> + * Input:
> + * ha = adapter block pointer.
> + *
> + * Returns:
> + */
> +static int qla24xx_n2n_handle_login(struct scsi_qla_host *vha,
> + fc_port_t *fcport)
> +{
> + struct qla_hw_data *ha = vha->hw;
> + int res = QLA_SUCCESS, rval;
> + int greater_wwpn = 0;
> + int logged_in = 0;
> +
> + if (ha->current_topology != ISP_CFG_N)
> + return res;
> +
> + if (wwn_to_u64(vha->port_name) >
> + wwn_to_u64(vha->n2n_port_name)) {
> + ql_dbg(ql_dbg_disc, vha, 0x2002,
> + "HBA WWPN is greater %llx > target %llx\n",
> + wwn_to_u64(vha->port_name),
> + wwn_to_u64(vha->n2n_port_name));
> + greater_wwpn = 1;
> + fcport->d_id.b24 = vha->n2n_id;
> + }
> +
> + fcport->loop_id = vha->loop_id;
> + fcport->fc4f_nvme = 0;
> + fcport->query = 1;
> +
> + ql_dbg(ql_dbg_disc, vha, 0x4001,
> + "Initiate N2N login handler: HBA port_id=%06x loopid=%d\n",
> + fcport->d_id.b24, vha->loop_id);
> +
> + /* Fill in member data. */
> + if (!greater_wwpn) {
> + rval = qla2x00_get_port_database(vha, fcport, 0);
> + ql_dbg(ql_dbg_disc, vha, 0x1051,
> + "Remote login-state (%x/%x) port_id=%06x loop_id=%x, rval=%d\n",
> + fcport->current_login_state, fcport->last_login_state,
> + fcport->d_id.b24, fcport->loop_id, rval);
> +
> + if (((fcport->current_login_state & 0xf) == 0x4) ||
> + ((fcport->current_login_state & 0xf) == 0x6))
> + logged_in = 1;
> + }
> +
> + if (logged_in || greater_wwpn) {
> + if (!vha->nvme_local_port && vha->flags.nvme_enabled)
> + qla_nvme_register_hba(vha);
> +
> + /* Set connected N_Port d_id */
> + if (vha->flags.nvme_enabled)
> + fcport->fc4f_nvme = 1;
> +
> + fcport->scan_state = QLA_FCPORT_FOUND;
> + fcport->fw_login_state = DSC_LS_PORT_UNAVAIL;
> + fcport->disc_state = DSC_GNL;
> + fcport->n2n_flag = 1;
> + fcport->flags = 3;
> + vha->hw->flags.gpsc_supported = 0;
> +
> + if (greater_wwpn) {
> + ql_dbg(ql_dbg_disc, vha, 0x20e5,
> + "%s %d PLOGI ELS %8phC\n",
> + __func__, __LINE__, fcport->port_name);
> +
> + res = qla24xx_els_dcmd2_iocb(vha, ELS_DCMD_PLOGI,
> + fcport, fcport->d_id);
> + }
> +
> + if (res != QLA_SUCCESS) {
> + ql_log(ql_log_info, vha, 0xd04d,
> + "PLOGI Failed: portid=%06x - retrying\n",
> + fcport->d_id.b24);
> + res = QLA_SUCCESS;
> + } else {
> + /* State 0x6 means FCP PRLI complete */
> + if ((fcport->current_login_state & 0xf) == 0x6) {
> + ql_dbg(ql_dbg_disc, vha, 0x2118,
> + "%s %d %8phC post GPDB work\n",
> + __func__, __LINE__, fcport->port_name);
> + fcport->chip_reset =
> + vha->hw->base_qpair->chip_reset;
> + qla24xx_post_gpdb_work(vha, fcport, 0);
> + } else {
> + ql_dbg(ql_dbg_disc, vha, 0x2118,
> + "%s %d %8phC post NVMe PRLI\n",
> + __func__, __LINE__, fcport->port_name);
> + qla24xx_post_prli_work(vha, fcport);
> + }
> + }
> + } else {
> + /* Wait for next database change */
> + set_bit(N2N_LOGIN_NEEDED, &vha->dpc_flags);
> + }
>
> + return res;
> +}
>
> /*
> * qla2x00_configure_local_loop
> @@ -4437,6 +4547,14 @@ qla2x00_configure_local_loop(scsi_qla_host_t *vha)
> }
> }
>
> + /* Inititae N2N login. */
> + if (test_and_clear_bit(N2N_LOGIN_NEEDED, &vha->dpc_flags)) {
> + rval = qla24xx_n2n_handle_login(vha, new_fcport);
> + if (rval != QLA_SUCCESS)
> + goto cleanup_allocation;
> + return QLA_SUCCESS;
> + }
> +
> /* Add devices to port list. */
> id_iter = (char *)ha->gid_list;
> for (index = 0; index < entries; index++) {
> @@ -4478,10 +4596,13 @@ qla2x00_configure_local_loop(scsi_qla_host_t *vha)
> "Failed to retrieve fcport information "
> "-- get_port_database=%x, loop_id=0x%04x.\n",
> rval2, new_fcport->loop_id);
> - ql_dbg(ql_dbg_disc, vha, 0x2105,
> - "Scheduling resync.\n");
> - set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags);
> - continue;
> + /* Skip retry if N2N */
> + if (ha->current_topology != ISP_CFG_N) {
> + ql_dbg(ql_dbg_disc, vha, 0x2105,
> + "Scheduling resync.\n");
> + set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags);
> + continue;
> + }
> }
>
> spin_lock_irqsave(&vha->hw->tgt.sess_lock, flags);
> @@ -7554,6 +7675,12 @@ qla81xx_nvram_config(scsi_qla_host_t *vha)
> if (qla_tgt_mode_enabled(vha) || qla_dual_mode_enabled(vha))
> icb->firmware_options_3 |= BIT_0;
>
> + if (IS_QLA27XX(ha)) {
> + icb->firmware_options_3 |= BIT_8;
> + ql_dbg(ql_log_info, vha, 0x0075,
> + "Enabling direct connection.\n");
> + }
> +
> if (rval) {
> ql_log(ql_log_warn, vha, 0x0076,
> "NVRAM configuration failed.\n");
> diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c
> index 2f94159186d7..0502ed7ee14e 100644
> --- a/drivers/scsi/qla2xxx/qla_iocb.c
> +++ b/drivers/scsi/qla2xxx/qla_iocb.c
> @@ -2518,6 +2518,7 @@ qla24xx_els_logo_iocb(srb_t *sp, struct els_entry_24xx *els_iocb)
> {
> scsi_qla_host_t *vha = sp->vha;
> struct srb_iocb *elsio = &sp->u.iocb_cmd;
> + uint32_t dsd_len = 24;
>
> els_iocb->entry_type = ELS_IOCB_TYPE;
> els_iocb->entry_count = 1;
> @@ -2534,24 +2535,198 @@ qla24xx_els_logo_iocb(srb_t *sp, struct els_entry_24xx *els_iocb)
> els_iocb->port_id[0] = sp->fcport->d_id.b.al_pa;
> els_iocb->port_id[1] = sp->fcport->d_id.b.area;
> els_iocb->port_id[2] = sp->fcport->d_id.b.domain;
> + els_iocb->s_id[0] = vha->d_id.b.al_pa;
> + els_iocb->s_id[1] = vha->d_id.b.area;
> + els_iocb->s_id[2] = vha->d_id.b.domain;
> els_iocb->control_flags = 0;
>
> - els_iocb->tx_byte_count = sizeof(struct els_logo_payload);
> - els_iocb->tx_address[0] =
> - cpu_to_le32(LSD(elsio->u.els_logo.els_logo_pyld_dma));
> - els_iocb->tx_address[1] =
> - cpu_to_le32(MSD(elsio->u.els_logo.els_logo_pyld_dma));
> - els_iocb->tx_len = cpu_to_le32(sizeof(struct els_logo_payload));
> + if (elsio->u.els_logo.els_cmd == ELS_DCMD_PLOGI) {
> + els_iocb->tx_byte_count = sizeof(struct els_plogi_payload);
> + els_iocb->tx_address[0] =
> + cpu_to_le32(LSD(elsio->u.els_plogi.els_plogi_pyld_dma));
> + els_iocb->tx_address[1] =
> + cpu_to_le32(MSD(elsio->u.els_plogi.els_plogi_pyld_dma));
> + els_iocb->tx_len = dsd_len;
> +
> + els_iocb->rx_dsd_count = 1;
> + els_iocb->rx_byte_count = sizeof(struct els_plogi_payload);
> + els_iocb->rx_address[0] =
> + cpu_to_le32(LSD(elsio->u.els_plogi.els_resp_pyld_dma));
> + els_iocb->rx_address[1] =
> + cpu_to_le32(MSD(elsio->u.els_plogi.els_resp_pyld_dma));
> + els_iocb->rx_len = dsd_len;
> + ql_dbg(ql_dbg_io + ql_dbg_buffer, vha, 0x3073,
> + "PLOGI ELS IOCB:\n");
> + ql_dump_buffer(ql_log_info, vha, 0x0109,
> + (uint8_t *)els_iocb, 0x70);
> + } else {
> + els_iocb->tx_byte_count = sizeof(struct els_logo_payload);
> + els_iocb->tx_address[0] =
> + cpu_to_le32(LSD(elsio->u.els_logo.els_logo_pyld_dma));
> + els_iocb->tx_address[1] =
> + cpu_to_le32(MSD(elsio->u.els_logo.els_logo_pyld_dma));
> + els_iocb->tx_len = cpu_to_le32(sizeof(struct els_logo_payload));
>
> - els_iocb->rx_byte_count = 0;
> - els_iocb->rx_address[0] = 0;
> - els_iocb->rx_address[1] = 0;
> - els_iocb->rx_len = 0;
> + els_iocb->rx_byte_count = 0;
> + els_iocb->rx_address[0] = 0;
> + els_iocb->rx_address[1] = 0;
> + els_iocb->rx_len = 0;
> + }
>
> sp->vha->qla_stats.control_requests++;
> }
>
> static void
> +qla2x00_els_dcmd2_sp_free(void *data)
> +{
> + srb_t *sp = data;
> + struct srb_iocb *elsio = &sp->u.iocb_cmd;
> +
> + if (elsio->u.els_plogi.els_plogi_pyld)
> + dma_free_coherent(&sp->vha->hw->pdev->dev, DMA_POOL_SIZE,
> + elsio->u.els_plogi.els_plogi_pyld,
> + elsio->u.els_plogi.els_plogi_pyld_dma);
> +
> + if (elsio->u.els_plogi.els_resp_pyld)
> + dma_free_coherent(&sp->vha->hw->pdev->dev, DMA_POOL_SIZE,
> + elsio->u.els_plogi.els_resp_pyld,
> + elsio->u.els_plogi.els_resp_pyld_dma);
> +
> + del_timer(&elsio->timer);
> + qla2x00_rel_sp(sp);
> +}
> +
> +static void
> +qla2x00_els_dcmd2_iocb_timeout(void *data)
> +{
> + srb_t *sp = data;
> + fc_port_t *fcport = sp->fcport;
> + struct scsi_qla_host *vha = sp->vha;
> + struct qla_hw_data *ha = vha->hw;
> + struct srb_iocb *lio = &sp->u.iocb_cmd;
> + unsigned long flags = 0;
> + int res;
> +
> + ql_dbg(ql_dbg_io + ql_dbg_disc, vha, 0x3069,
> + "%s hdl=%x ELS Timeout, %8phC portid=%06x\n",
> + sp->name, sp->handle, fcport->port_name, fcport->d_id.b24);
> +
> + /* Abort the exchange */
> + spin_lock_irqsave(&ha->hardware_lock, flags);
> + res = ha->isp_ops->abort_command(sp);
> + ql_dbg(ql_dbg_io, vha, 0x3070,
> + "mbx abort_command %s\n",
> + (res == QLA_SUCCESS) ? "successful" : "failed");
> + spin_unlock_irqrestore(&ha->hardware_lock, flags);
> +
> + complete(&lio->u.els_plogi.comp);
> +}
> +
> +static void
> +qla2x00_els_dcmd2_sp_done(void *ptr, int res)
> +{
> + srb_t *sp = ptr;
> + fc_port_t *fcport = sp->fcport;
> + struct srb_iocb *lio = &sp->u.iocb_cmd;
> + struct scsi_qla_host *vha = sp->vha;
> +
> + ql_dbg(ql_dbg_io + ql_dbg_disc, vha, 0x3072,
> + "%s ELS hdl=%x, portid=%06x done %8pC\n",
> + sp->name, sp->handle, fcport->d_id.b24, fcport->port_name);
> +
> + complete(&lio->u.els_plogi.comp);
> +}
> +
> +int
> +qla24xx_els_dcmd2_iocb(scsi_qla_host_t *vha, int els_opcode,
> + fc_port_t *fcport, port_id_t remote_did)
> +{
> + srb_t *sp;
> + struct srb_iocb *elsio = NULL;
> + struct qla_hw_data *ha = vha->hw;
> + int rval = QLA_SUCCESS;
> + void *ptr, *resp_ptr;
> + dma_addr_t ptr_dma;
> +
> + /* Alloc SRB structure */
> + sp = qla2x00_get_sp(vha, fcport, GFP_KERNEL);
> + if (!sp) {
> + ql_log(ql_log_info, vha, 0x70e6,
> + "SRB allocation failed\n");
> + return -ENOMEM;
> + }
> +
> + elsio = &sp->u.iocb_cmd;
> + fcport->d_id.b.domain = remote_did.b.domain;
> + fcport->d_id.b.area = remote_did.b.area;
> + fcport->d_id.b.al_pa = remote_did.b.al_pa;
> +
> + ql_dbg(ql_dbg_io, vha, 0x3073,
> + "Enter: PLOGI portid=%06x\n", fcport->d_id.b24);
> +
> + sp->type = SRB_ELS_DCMD;
> + sp->name = "ELS_DCMD";
> + sp->fcport = fcport;
> + qla2x00_init_timer(sp, ELS_DCMD_TIMEOUT);
> + elsio->timeout = qla2x00_els_dcmd2_iocb_timeout;
> + sp->done = qla2x00_els_dcmd2_sp_done;
> + sp->free = qla2x00_els_dcmd2_sp_free;
> +
> + ptr = elsio->u.els_plogi.els_plogi_pyld =
> + dma_alloc_coherent(&ha->pdev->dev, DMA_POOL_SIZE,
> + &elsio->u.els_plogi.els_plogi_pyld_dma, GFP_KERNEL);
> + ptr_dma = elsio->u.els_plogi.els_plogi_pyld_dma;
> +
> + if (!elsio->u.els_plogi.els_plogi_pyld) {
> + rval = QLA_FUNCTION_FAILED;
> + goto out;
> + }
> +
> + resp_ptr = elsio->u.els_plogi.els_resp_pyld =
> + dma_alloc_coherent(&ha->pdev->dev, DMA_POOL_SIZE,
> + &elsio->u.els_plogi.els_resp_pyld_dma, GFP_KERNEL);
> +
> + if (!elsio->u.els_plogi.els_resp_pyld) {
> + rval = QLA_FUNCTION_FAILED;
> + goto out;
> + }
> +
> + ql_dbg(ql_dbg_io, vha, 0x3073, "PLOGI %p %p\n", ptr, resp_ptr);
> +
> + memset(ptr, 0, sizeof(struct els_plogi_payload));
> + memset(resp_ptr, 0, sizeof(struct els_plogi_payload));
> + elsio->u.els_plogi.els_cmd = els_opcode;
> + elsio->u.els_plogi.els_plogi_pyld->opcode = els_opcode;
> + qla24xx_get_port_login_templ(vha, ptr_dma + 4,
> + &elsio->u.els_plogi.els_plogi_pyld->data[0],
> + sizeof(struct els_plogi_payload));
> +
> + ql_dbg(ql_dbg_io + ql_dbg_buffer, vha, 0x3073, "PLOGI buffer:\n");
> + ql_dump_buffer(ql_dbg_io + ql_dbg_buffer, vha, 0x0109,
> + (uint8_t *)elsio->u.els_plogi.els_plogi_pyld, 0x70);
> +
> + init_completion(&elsio->u.els_plogi.comp);
> + rval = qla2x00_start_sp(sp);
> + if (rval != QLA_SUCCESS) {
> + rval = QLA_FUNCTION_FAILED;
> + goto out;
> + }
> +
> + ql_dbg(ql_dbg_io, vha, 0x3074,
> + "%s PLOGI sent, hdl=%x, loopid=%x, portid=%06x\n",
> + sp->name, sp->handle, fcport->loop_id, fcport->d_id.b24);
> +
> + wait_for_completion(&elsio->u.els_plogi.comp);
> +
> + if (elsio->u.els_plogi.comp_status != CS_COMPLETE)
> + rval = QLA_FUNCTION_FAILED;
> +
> +out:
> + sp->free(sp);
> + return rval;
> +}
> +
> +static void
> qla24xx_els_iocb(srb_t *sp, struct els_entry_24xx *els_iocb)
> {
> struct bsg_job *bsg_job = sp->u.bsg_job;
> diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
> index ab97fb06c239..d06a1a809188 100644
> --- a/drivers/scsi/qla2xxx/qla_isr.c
> +++ b/drivers/scsi/qla2xxx/qla_isr.c
> @@ -1041,6 +1041,7 @@ qla2x00_async_event(scsi_qla_host_t *vha, struct rsp_que *rsp, uint16_t *mb)
> */
> atomic_set(&vha->loop_down_timer, 0);
> if (atomic_read(&vha->loop_state) != LOOP_DOWN &&
> + !ha->flags.n2n_ae &&
> atomic_read(&vha->loop_state) != LOOP_DEAD) {
> ql_dbg(ql_dbg_async, vha, 0x5011,
> "Asynchronous PORT UPDATE ignored %04x/%04x/%04x.\n",
> @@ -1545,6 +1546,7 @@ qla24xx_els_ct_entry(scsi_qla_host_t *vha, struct req_que *req,
> uint32_t fw_status[3];
> uint8_t* fw_sts_ptr;
> int res;
> + struct srb_iocb *els;
>
> sp = qla2x00_get_sp_from_handle(vha, func, req, pkt);
> if (!sp)
> @@ -1561,10 +1563,14 @@ qla24xx_els_ct_entry(scsi_qla_host_t *vha, struct req_que *req,
> break;
> case SRB_ELS_DCMD:
> type = "Driver ELS logo";
> - ql_dbg(ql_dbg_user, vha, 0x5047,
> - "Completing %s: (%p) type=%d.\n", type, sp, sp->type);
> - sp->done(sp, 0);
> - return;
> + if (iocb_type != ELS_IOCB_TYPE) {
> + ql_dbg(ql_dbg_user, vha, 0x5047,
> + "Completing %s: (%p) type=%d.\n",
> + type, sp, sp->type);
> + sp->done(sp, 0);
> + return;
> + }
> + break;
> case SRB_CT_PTHRU_CMD:
> /* borrowing sts_entry_24xx.comp_status.
> same location as ct_entry_24xx.comp_status
> @@ -1584,6 +1590,33 @@ qla24xx_els_ct_entry(scsi_qla_host_t *vha, struct req_que *req,
> fw_status[1] = le16_to_cpu(((struct els_sts_entry_24xx*)pkt)->error_subcode_1);
> fw_status[2] = le16_to_cpu(((struct els_sts_entry_24xx*)pkt)->error_subcode_2);
>
> + if (iocb_type == ELS_IOCB_TYPE) {
> + els = &sp->u.iocb_cmd;
> + els->u.els_plogi.fw_status[0] = fw_status[0];
> + els->u.els_plogi.fw_status[1] = fw_status[1];
> + els->u.els_plogi.fw_status[2] = fw_status[2];
> + els->u.els_plogi.comp_status = fw_status[0];
> + if (comp_status == CS_COMPLETE) {
> + res = DID_OK << 16;
> + } else {
> + if (comp_status == CS_DATA_UNDERRUN) {
> + res = DID_OK << 16;
> + els->u.els_plogi.len =
> + le16_to_cpu(((struct els_sts_entry_24xx *)
> + pkt)->total_byte_count);
> + } else {
> + els->u.els_plogi.len = 0;
> + res = DID_ERROR << 16;
> + }
> + }
> + ql_log(ql_log_info, vha, 0x503f,
> + "ELS IOCB Done -%s error hdl=%x comp_status=0x%x error subcode 1=0x%x error subcode 2=0x%x total_byte=0x%x\n",
> + type, sp->handle, comp_status, fw_status[1], fw_status[2],
> + le16_to_cpu(((struct els_sts_entry_24xx *)
> + pkt)->total_byte_count));
> + goto els_ct_done;
> + }
> +
> /* return FC_CTELS_STATUS_OK and leave the decoding of the ELS/CT
> * fc payload to the caller
> */
> @@ -1631,6 +1664,7 @@ qla24xx_els_ct_entry(scsi_qla_host_t *vha, struct req_que *req,
> bsg_reply->reply_payload_rcv_len = bsg_job->reply_payload.payload_len;
> bsg_job->reply_len = 0;
> }
> +els_ct_done:
>
> sp->done(sp, res);
> }
> diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
> index 71e56877e1eb..d44f65fe9434 100644
> --- a/drivers/scsi/qla2xxx/qla_mbx.c
> +++ b/drivers/scsi/qla2xxx/qla_mbx.c
> @@ -1786,6 +1786,7 @@ qla2x00_get_port_database(scsi_qla_host_t *vha, fc_port_t *fcport, uint8_t opt)
> if (pd == NULL) {
> ql_log(ql_log_warn, vha, 0x1050,
> "Failed to allocate port database structure.\n");
> + fcport->query = 0;
> return QLA_MEMORY_ALLOC_FAILED;
> }
>
> @@ -1926,6 +1927,7 @@ qla2x00_get_port_database(scsi_qla_host_t *vha, fc_port_t *fcport, uint8_t opt)
>
> gpd_error_out:
> dma_pool_free(ha->s_dma_pool, pd, pd_dma);
> + fcport->query = 0;
>
> if (rval != QLA_SUCCESS) {
> ql_dbg(ql_dbg_mbx, vha, 0x1052,
> @@ -3762,6 +3764,38 @@ qla24xx_report_id_acquisition(scsi_qla_host_t *vha,
> rptid_entry->vp_status,
> rptid_entry->port_id[2], rptid_entry->port_id[1],
> rptid_entry->port_id[0]);
> + ql_dbg(ql_dbg_async, vha, 0x5075,
> + "Format 1: Remote WWPN %8phC.\n",
> + rptid_entry->u.f1.port_name);
> +
> + ql_dbg(ql_dbg_async, vha, 0x5075,
> + "Format 1: WWPN %8phC.\n",
> + vha->port_name);
> +
> + /* N2N. direct connect */
> + if (IS_QLA27XX(ha) &&
> + ((rptid_entry->u.f1.flags>>1) & 0x7) == 2) {
> + /* if our portname is higher then initiate N2N login */
> + if (wwn_to_u64(vha->port_name) >
> + wwn_to_u64(rptid_entry->u.f1.port_name)) {
> + // ??? qlt_update_host_map(vha, id);
> + vha->n2n_id = 0x1;
> + ql_dbg(ql_dbg_async, vha, 0x5075,
> + "Format 1: Setting n2n_update_needed for id %d\n",
> + vha->n2n_id);
> + } else {
> + ql_dbg(ql_dbg_async, vha, 0x5075,
> + "Format 1: Remote login - Waiting for WWPN %8phC.\n",
> + rptid_entry->u.f1.port_name);
> + }
> +
> + memcpy(vha->n2n_port_name, rptid_entry->u.f1.port_name,
> + WWN_SIZE);
> + set_bit(N2N_LOGIN_NEEDED, &vha->dpc_flags);
> + set_bit(REGISTER_FC4_NEEDED, &vha->dpc_flags);
> + set_bit(REGISTER_FDMI_NEEDED, &vha->dpc_flags);
> + return;
> + }
>
> /* buffer to buffer credit flag */
> vha->flags.bbcr_enable = (rptid_entry->u.f1.bbcr & 0xf) != 0;
> @@ -4599,6 +4633,48 @@ qla25xx_set_driver_version(scsi_qla_host_t *vha, char *version)
> return rval;
> }
>
> +int
> +qla24xx_get_port_login_templ(scsi_qla_host_t *vha, dma_addr_t buf_dma,
> + void *buf, uint16_t bufsiz)
> +{
> + int rval, i;
> + mbx_cmd_t mc;
> + mbx_cmd_t *mcp = &mc;
> + uint32_t *bp;
> +
> + if (!IS_FWI2_CAPABLE(vha->hw))
> + return QLA_FUNCTION_FAILED;
> +
> + ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x1159,
> + "Entered %s.\n", __func__);
> +
> + mcp->mb[0] = MBC_GET_RNID_PARAMS;
> + mcp->mb[1] = RNID_TYPE_PORT_LOGIN << 8;
> + mcp->mb[2] = MSW(buf_dma);
> + mcp->mb[3] = LSW(buf_dma);
> + mcp->mb[6] = MSW(MSD(buf_dma));
> + mcp->mb[7] = LSW(MSD(buf_dma));
> + mcp->mb[8] = bufsiz/4;
> + mcp->out_mb = MBX_8|MBX_7|MBX_6|MBX_5|MBX_4|MBX_3|MBX_2|MBX_1|MBX_0;
> + mcp->in_mb = MBX_1|MBX_0;
> + mcp->tov = MBX_TOV_SECONDS;
> + mcp->flags = 0;
> + rval = qla2x00_mailbox_command(vha, mcp);
> +
> + if (rval != QLA_SUCCESS) {
> + ql_dbg(ql_dbg_mbx, vha, 0x115a,
> + "Failed=%x mb[0]=%x,%x.\n", rval, mcp->mb[0], mcp->mb[1]);
> + } else {
> + ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x115b,
> + "Done %s.\n", __func__);
> + bp = (uint32_t *) buf;
> + for (i = 0; i < (bufsiz-4)/4; i++, bp++)
> + *bp = cpu_to_be32(*bp);
> + }
> +
> + return rval;
> +}
> +
> static int
> qla2x00_read_asic_temperature(scsi_qla_host_t *vha, uint16_t *temp)
> {
Thanks.
Tested-by: Ewan D. Milne <emilne@redhat.com>
next prev parent reply other threads:[~2017-10-13 17:01 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-13 16:34 [PATCH v2 0/5] qla2xxx: Patches for scsi-misc Madhani, Madhani
2017-10-13 16:34 ` [PATCH v2 1/5] qla2xxx: Add module param ql2xenablemsix Madhani, Madhani
2017-10-13 16:34 ` [PATCH v2 2/5] qla2xxx: Add ATIO-Q processing for INTx mode Madhani, Madhani
2017-10-13 16:34 ` [PATCH v2 3/5] qla2xxx: Allow MBC_GET_PORT_DATABASE to query and save the port states Madhani, Madhani
2017-10-13 16:34 ` [PATCH v2 4/5] qla2xxx: Changes to support N2N logins Madhani, Madhani
2017-10-13 17:01 ` Ewan D. Milne [this message]
2017-10-13 16:34 ` [PATCH v2 5/5] qla2xxx: Update driver version to 10.00.00.02-k Madhani, Madhani
2017-10-17 3:08 ` [PATCH v2 0/5] qla2xxx: Patches for scsi-misc Martin K. Petersen
2017-10-26 3:48 ` Madhani, Himanshu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1507914077.24441.106.camel@localhost.localdomain \
--to=emilne@redhat.com \
--cc=James.Bottomley@HansenPartnership.com \
--cc=himanshu.madhani@cavium.com \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).