From: "Ewan D. Milne" <emilne@redhat.com>
To: Manish Rangankar <manish.rangankar@cavium.com>
Cc: martin.petersen@oracle.com, lduncan@suse.com, cleech@redhat.com,
linux-scsi@vger.kernel.org, QLogic-Storage-Upstream@cavium.com
Subject: Re: [PATCH] qla4xxx: skip error recovery in case of register disconnect.
Date: Mon, 12 Feb 2018 10:05:28 -0500 [thread overview]
Message-ID: <1518447928.2427.3.camel@localhost.localdomain> (raw)
In-Reply-To: <20180212064841.24503-1-manish.rangankar@cavium.com>
On Sun, 2018-02-11 at 22:48 -0800, Manish Rangankar wrote:
> A system crashes when continuously removing/re-adding
> the storage controller.
>
> Signed-off-by: Manish Rangankar <manish.rangankar@cavium.com>
> ---
> drivers/scsi/qla4xxx/ql4_def.h | 2 ++
> drivers/scsi/qla4xxx/ql4_os.c | 46 ++++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 48 insertions(+)
>
> diff --git a/drivers/scsi/qla4xxx/ql4_def.h b/drivers/scsi/qla4xxx/ql4_def.h
> index fc23371..817f312 100644
> --- a/drivers/scsi/qla4xxx/ql4_def.h
> +++ b/drivers/scsi/qla4xxx/ql4_def.h
> @@ -168,6 +168,8 @@
> #define DEV_DB_NON_PERSISTENT 0
> #define DEV_DB_PERSISTENT 1
>
> +#define QL4_ISP_REG_DISCONNECT 0xffffffffU
> +
> #define COPY_ISID(dst_isid, src_isid) { \
> int i, j; \
> for (i = 0, j = ISID_SIZE - 1; i < ISID_SIZE;) \
> diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c
> index 2b8a8ce..efaa7f1 100644
> --- a/drivers/scsi/qla4xxx/ql4_os.c
> +++ b/drivers/scsi/qla4xxx/ql4_os.c
> @@ -262,6 +262,24 @@ static int qla4xxx_sysfs_ddb_logout(struct iscsi_bus_flash_session *fnode_sess,
>
> static struct scsi_transport_template *qla4xxx_scsi_transport;
>
> +static int qla4xxx_isp_check_reg(struct scsi_qla_host *ha)
> +{
> + u32 reg_val = 0;
> + int rval = QLA_SUCCESS;
> +
> + if (is_qla8022(ha))
> + reg_val = readl(&ha->qla4_82xx_reg->host_status);
> + else if (is_qla8032(ha) || is_qla8042(ha))
> + reg_val = qla4_8xxx_rd_direct(ha, QLA8XXX_PEG_ALIVE_COUNTER);
> + else
> + reg_val = readw(&ha->reg->ctrl_status);
> +
> + if (reg_val == QL4_ISP_REG_DISCONNECT)
> + rval = QLA_ERROR;
> +
> + return rval;
> +}
> +
> static int qla4xxx_send_ping(struct Scsi_Host *shost, uint32_t iface_num,
> uint32_t iface_type, uint32_t payload_size,
> uint32_t pid, struct sockaddr *dst_addr)
> @@ -9188,10 +9206,17 @@ static int qla4xxx_eh_abort(struct scsi_cmnd *cmd)
> struct srb *srb = NULL;
> int ret = SUCCESS;
> int wait = 0;
> + int rval;
>
> ql4_printk(KERN_INFO, ha, "scsi%ld:%d:%llu: Abort command issued cmd=%p, cdb=0x%x\n",
> ha->host_no, id, lun, cmd, cmd->cmnd[0]);
>
> + rval = qla4xxx_isp_check_reg(ha);
> + if (rval != QLA_SUCCESS) {
> + ql4_printk(KERN_INFO, ha, "PCI/Register disconnect, exiting.\n");
> + return FAILED;
> + }
> +
> spin_lock_irqsave(&ha->hardware_lock, flags);
> srb = (struct srb *) CMD_SP(cmd);
> if (!srb) {
> @@ -9243,6 +9268,7 @@ static int qla4xxx_eh_device_reset(struct scsi_cmnd *cmd)
> struct scsi_qla_host *ha = to_qla_host(cmd->device->host);
> struct ddb_entry *ddb_entry = cmd->device->hostdata;
> int ret = FAILED, stat;
> + int rval;
>
> if (!ddb_entry)
> return ret;
> @@ -9262,6 +9288,12 @@ static int qla4xxx_eh_device_reset(struct scsi_cmnd *cmd)
> cmd, jiffies, cmd->request->timeout / HZ,
> ha->dpc_flags, cmd->result, cmd->allowed));
>
> + rval = qla4xxx_isp_check_reg(ha);
> + if (rval != QLA_SUCCESS) {
> + ql4_printk(KERN_INFO, ha, "PCI/Register disconnect, exiting.\n");
> + return FAILED;
> + }
> +
> /* FIXME: wait for hba to go online */
> stat = qla4xxx_reset_lun(ha, ddb_entry, cmd->device->lun);
> if (stat != QLA_SUCCESS) {
> @@ -9305,6 +9337,7 @@ static int qla4xxx_eh_target_reset(struct scsi_cmnd *cmd)
> struct scsi_qla_host *ha = to_qla_host(cmd->device->host);
> struct ddb_entry *ddb_entry = cmd->device->hostdata;
> int stat, ret;
> + int rval;
>
> if (!ddb_entry)
> return FAILED;
> @@ -9322,6 +9355,12 @@ static int qla4xxx_eh_target_reset(struct scsi_cmnd *cmd)
> ha->host_no, cmd, jiffies, cmd->request->timeout / HZ,
> ha->dpc_flags, cmd->result, cmd->allowed));
>
> + rval = qla4xxx_isp_check_reg(ha);
> + if (rval != QLA_SUCCESS) {
> + ql4_printk(KERN_INFO, ha, "PCI/Register disconnect, exiting.\n");
> + return FAILED;
> + }
> +
> stat = qla4xxx_reset_target(ha, ddb_entry);
> if (stat != QLA_SUCCESS) {
> starget_printk(KERN_INFO, scsi_target(cmd->device),
> @@ -9376,9 +9415,16 @@ static int qla4xxx_eh_host_reset(struct scsi_cmnd *cmd)
> {
> int return_status = FAILED;
> struct scsi_qla_host *ha;
> + int rval;
>
> ha = to_qla_host(cmd->device->host);
>
> + rval = qla4xxx_isp_check_reg(ha);
> + if (rval != QLA_SUCCESS) {
> + ql4_printk(KERN_INFO, ha, "PCI/Register disconnect, exiting.\n");
> + return FAILED;
> + }
> +
> if ((is_qla8032(ha) || is_qla8042(ha)) && ql4xdontresethba)
> qla4_83xx_set_idc_dontreset(ha);
>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
next prev parent reply other threads:[~2018-02-12 15:05 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-12 6:48 [PATCH] qla4xxx: skip error recovery in case of register disconnect Manish Rangankar
2018-02-12 15:05 ` Ewan D. Milne [this message]
2018-02-13 14:16 ` Tomas Henzl
2018-02-14 2:35 ` Martin K. Petersen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1518447928.2427.3.camel@localhost.localdomain \
--to=emilne@redhat.com \
--cc=QLogic-Storage-Upstream@cavium.com \
--cc=cleech@redhat.com \
--cc=lduncan@suse.com \
--cc=linux-scsi@vger.kernel.org \
--cc=manish.rangankar@cavium.com \
--cc=martin.petersen@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox