linux-scsi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: zhong jiang <zhongjiang@huawei.com>
To: jejb@linux.vnet.ibm.com, martin.petersen@oracle.com,
	aacraid@microsemi.com
Cc: andy.shevchenko@gmail.com, joe@perches.com,
	linux-scsi@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 2/4] drivers/scsi/dpt_i2o: Use dma_zalloc_coherent to repalce dma_alloc_coherent+memset
Date: Thu, 2 Aug 2018 19:28:32 +0800	[thread overview]
Message-ID: <1533209314-1074-3-git-send-email-zhongjiang@huawei.com> (raw)
In-Reply-To: <1533209314-1074-1-git-send-email-zhongjiang@huawei.com>

We prefer to dma_zalloc_coherent rather than open code 
dma_alloc_coherent() + memset(), So just replace them.

Signed-off-by: zhong jiang <zhongjiang@huawei.com>
---
 drivers/scsi/dpt_i2o.c | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

diff --git a/drivers/scsi/dpt_i2o.c b/drivers/scsi/dpt_i2o.c
index 37de8fb..056383a 100644
--- a/drivers/scsi/dpt_i2o.c
+++ b/drivers/scsi/dpt_i2o.c
@@ -1370,13 +1370,12 @@ static s32 adpt_i2o_reset_hba(adpt_hba* pHba)
 		schedule_timeout_uninterruptible(1);
 	} while (m == EMPTY_QUEUE);
 
-	status = dma_alloc_coherent(&pHba->pDev->dev, 4, &addr, GFP_KERNEL);
+	status = dma_zalloc_coherent(&pHba->pDev->dev, 4, &addr, GFP_KERNEL);
 	if(status == NULL) {
 		adpt_send_nop(pHba, m);
 		printk(KERN_ERR"IOP reset failed - no free memory.\n");
 		return -ENOMEM;
 	}
-	memset(status,0,4);
 
 	msg[0]=EIGHT_WORD_MSG_SIZE|SGL_OFFSET_0;
 	msg[1]=I2O_CMD_ADAPTER_RESET<<24|HOST_TID<<12|ADAPTER_TID;
@@ -2836,14 +2835,13 @@ static s32 adpt_i2o_init_outbound_q(adpt_hba* pHba)
 
 	msg=(u32 __iomem *)(pHba->msg_addr_virt+m);
 
-	status = dma_alloc_coherent(&pHba->pDev->dev, 4, &addr, GFP_KERNEL);
+	status = dma_zalloc_coherent(&pHba->pDev->dev, 4, &addr, GFP_KERNEL);
 	if (!status) {
 		adpt_send_nop(pHba, m);
 		printk(KERN_WARNING"%s: IOP reset failed - no free memory.\n",
 			pHba->name);
 		return -ENOMEM;
 	}
-	memset(status, 0, 4);
 
 	writel(EIGHT_WORD_MSG_SIZE| SGL_OFFSET_6, &msg[0]);
 	writel(I2O_CMD_OUTBOUND_INIT<<24 | HOST_TID<<12 | ADAPTER_TID, &msg[1]);
@@ -2890,14 +2888,13 @@ static s32 adpt_i2o_init_outbound_q(adpt_hba* pHba)
 			pHba->reply_pool, pHba->reply_pool_pa);
 	}
 
-	pHba->reply_pool = dma_alloc_coherent(&pHba->pDev->dev,
+	pHba->reply_pool = dma_zalloc_coherent(&pHba->pDev->dev,
 				pHba->reply_fifo_size * REPLY_FRAME_SIZE * 4,
 				&pHba->reply_pool_pa, GFP_KERNEL);
 	if (!pHba->reply_pool) {
 		printk(KERN_ERR "%s: Could not allocate reply pool\n", pHba->name);
 		return -ENOMEM;
 	}
-	memset(pHba->reply_pool, 0 , pHba->reply_fifo_size * REPLY_FRAME_SIZE * 4);
 
 	for(i = 0; i < pHba->reply_fifo_size; i++) {
 		writel(pHba->reply_pool_pa + (i * REPLY_FRAME_SIZE * 4),
@@ -3126,13 +3123,12 @@ static int adpt_i2o_build_sys_table(void)
 	sys_tbl_len = sizeof(struct i2o_sys_tbl) +	// Header + IOPs
 				(hba_count) * sizeof(struct i2o_sys_tbl_entry);
 
-	sys_tbl = dma_alloc_coherent(&pHba->pDev->dev,
+	sys_tbl = dma_zalloc_coherent(&pHba->pDev->dev,
 				sys_tbl_len, &sys_tbl_pa, GFP_KERNEL);
 	if (!sys_tbl) {
 		printk(KERN_WARNING "SysTab Set failed. Out of memory.\n");	
 		return -ENOMEM;
 	}
-	memset(sys_tbl, 0, sys_tbl_len);
 
 	sys_tbl->num_entries = hba_count;
 	sys_tbl->version = I2OVERSION;
-- 
1.7.12.4

  parent reply	other threads:[~2018-08-02 11:28 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-08-02 11:28 [PATCH v2 0/4] Use dma_zalloc_coherent and kvcalloc to replace open code zhong jiang
2018-08-02 11:28 ` [PATCH v2 1/4] driver/scsi/fnic/fnic_trace: Use kvcalloc instead of vmalloc+memset zhong jiang
2018-08-02 11:28 ` zhong jiang [this message]
2018-08-02 11:28 ` [PATCH v2 3/4] drivers/scsi/snic/snic_trc: " zhong jiang
2018-08-02 11:28 ` [PATCH v2 4/4] drivers/scsi/mvsas/mv_init: Use dma_zalloc_coherent to replace dma_alloc_coherent+memset zhong jiang
2018-08-23 11:25 ` [PATCH v2 0/4] Use dma_zalloc_coherent and kvcalloc to replace open code zhong jiang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1533209314-1074-3-git-send-email-zhongjiang@huawei.com \
    --to=zhongjiang@huawei.com \
    --cc=aacraid@microsemi.com \
    --cc=andy.shevchenko@gmail.com \
    --cc=jejb@linux.vnet.ibm.com \
    --cc=joe@perches.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=martin.petersen@oracle.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).