[PATCH v2 4/4] drivers/scsi/mvsas/mv_init: Use dma_zalloc_coherent to replace dma_alloc_coherent+memset

[zhong jiang <zhongjiang@huawei.com>]

The dma_zalloc_coherent is better than dma_alloc_coherent+memset,
so replace them.

Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
---
 drivers/scsi/mvsas/mv_init.c | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

diff --git a/drivers/scsi/mvsas/mv_init.c b/drivers/scsi/mvsas/mv_init.c
index 8c91637..da62e18 100644
--- a/drivers/scsi/mvsas/mv_init.c
+++ b/drivers/scsi/mvsas/mv_init.c
@@ -253,33 +253,29 @@ static int mvs_alloc(struct mvs_info *mvi, struct Scsi_Host *shost)
 	/*
 	 * alloc and init our DMA areas
 	 */
-	mvi->tx = dma_alloc_coherent(mvi->dev,
+	mvi->tx = dma_zalloc_coherent(mvi->dev,
 				     sizeof(*mvi->tx) * MVS_CHIP_SLOT_SZ,
 				     &mvi->tx_dma, GFP_KERNEL);
 	if (!mvi->tx)
 		goto err_out;
-	memset(mvi->tx, 0, sizeof(*mvi->tx) * MVS_CHIP_SLOT_SZ);
-	mvi->rx_fis = dma_alloc_coherent(mvi->dev, MVS_RX_FISL_SZ,
+	mvi->rx_fis = dma_zalloc_coherent(mvi->dev, MVS_RX_FISL_SZ,
 					 &mvi->rx_fis_dma, GFP_KERNEL);
 	if (!mvi->rx_fis)
 		goto err_out;
-	memset(mvi->rx_fis, 0, MVS_RX_FISL_SZ);
 
-	mvi->rx = dma_alloc_coherent(mvi->dev,
+	mvi->rx = dma_zalloc_coherent(mvi->dev,
 				     sizeof(*mvi->rx) * (MVS_RX_RING_SZ + 1),
 				     &mvi->rx_dma, GFP_KERNEL);
 	if (!mvi->rx)
 		goto err_out;
-	memset(mvi->rx, 0, sizeof(*mvi->rx) * (MVS_RX_RING_SZ + 1));
 	mvi->rx[0] = cpu_to_le32(0xfff);
 	mvi->rx_cons = 0xfff;
 
-	mvi->slot = dma_alloc_coherent(mvi->dev,
+	mvi->slot = dma_zalloc_coherent(mvi->dev,
 				       sizeof(*mvi->slot) * slot_nr,
 				       &mvi->slot_dma, GFP_KERNEL);
 	if (!mvi->slot)
 		goto err_out;
-	memset(mvi->slot, 0, sizeof(*mvi->slot) * slot_nr);
 
 	mvi->bulk_buffer = dma_alloc_coherent(mvi->dev,
 				       TRASH_BUCKET_SIZE,
-- 
1.7.12.4