From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Ewan D. Milne" Subject: Re: [PATCH] lpfc: Correct MDS diag and nvmet configuration Date: Mon, 20 Aug 2018 18:15:13 -0400 Message-ID: <1534803313.4073.33.camel@localhost.localdomain> References: <20180816230405.14272-1-jsmart2021@gmail.com> Reply-To: emilne@redhat.com Mime-Version: 1.0 Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20180816230405.14272-1-jsmart2021@gmail.com> Sender: stable-owner@vger.kernel.org To: James Smart Cc: linux-scsi@vger.kernel.org, stable@vger.kernel.org, Dick Kennedy , James Smart List-Id: linux-scsi@vger.kernel.org On Thu, 2018-08-16 at 16:04 -0700, James Smart wrote: > A recent change added some MDS processing in the lpfc_drain_txq > routine that relies on the fcp_wq being allocated. For nvmet operation > the fcp_wq is not allocated because it can only be an nvme-target. > When the original MDS support was added LS_MDS_LOOPBACK was > defined wrong, (0x16) it should have been 0x10 (decimal value used for > hex setting). This incorrect value allowed MDS_LOOPBACK to be set > simultaneously with LS_NPIV_FAB_SUPPORTED, causing the driver to > crash when it accesses the non-existent fcp_wq. > > Correct the bad value setting for LS_MDS_LOOPBACK. > > Fixes: ae9e28f36a6c ("lpfc: Add MDS Diagnostic support.") > Cc: # 4.12 > Signed-off-by: Dick Kennedy > Signed-off-by: James Smart > --- > drivers/scsi/lpfc/lpfc.h | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h > index e0d0da5f43d6..43732e8d1347 100644 > --- a/drivers/scsi/lpfc/lpfc.h > +++ b/drivers/scsi/lpfc/lpfc.h > @@ -672,7 +672,7 @@ struct lpfc_hba { > #define LS_NPIV_FAB_SUPPORTED 0x2 /* Fabric supports NPIV */ > #define LS_IGNORE_ERATT 0x4 /* intr handler should ignore ERATT */ > #define LS_MDS_LINK_DOWN 0x8 /* MDS Diagnostics Link Down */ > -#define LS_MDS_LOOPBACK 0x16 /* MDS Diagnostics Link Up (Loopback) */ > +#define LS_MDS_LOOPBACK 0x10 /* MDS Diagnostics Link Up (Loopback) */ > > uint32_t hba_flag; /* hba generic flags */ > #define HBA_ERATT_HANDLED 0x1 /* This flag is set when eratt handled */ Fixes driver crash when lpfc_enable_nvmet used. Tested-by: Ewan D. Milne