From: Can Guo <cang@codeaurora.org>
To: asutoshd@codeaurora.org, nguyenb@codeaurora.org,
hongwus@codeaurora.org, rnayak@codeaurora.org,
linux-scsi@vger.kernel.org, kernel-team@android.com,
saravanak@google.com, salyzyn@google.com, cang@codeaurora.org
Cc: Alim Akhtar <alim.akhtar@samsung.com>,
Avri Altman <avri.altman@wdc.com>,
"James E.J. Bottomley" <jejb@linux.ibm.com>,
"Martin K. Petersen" <martin.petersen@oracle.com>,
Bean Huo <beanhuo@micron.com>,
Stanley Chu <stanley.chu@mediatek.com>,
Bart Van Assche <bvanassche@acm.org>,
Venkat Gopalakrishnan <venkatg@codeaurora.org>,
Tomas Winkler <tomas.winkler@intel.com>,
Thomas Gleixner <tglx@linutronix.de>,
Pedro Sousa <sousa@synopsys.com>,
linux-kernel@vger.kernel.org (open list)
Subject: [PATCH v7 8/8] scsi: ufs: Select INITIAL adapt for HS Gear4
Date: Thu, 6 Feb 2020 00:33:27 -0800 [thread overview]
Message-ID: <1580978008-9327-9-git-send-email-cang@codeaurora.org> (raw)
In-Reply-To: <1580978008-9327-1-git-send-email-cang@codeaurora.org>
ADAPT is added specifically for HS Gear4 mode only, select INITIAL adapt
before do power mode change to G4 and select no adapt before switch to
non-G4 modes.
Signed-off-by: Can Guo <cang@codeaurora.org>
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Reviewed-by: Hongwu Su <hongwus@codeaurora.org>
Reviewed-by: Bean Huo <beanhuo@micron.com>
---
drivers/scsi/ufs/ufshcd.c | 14 +++++++++++++-
drivers/scsi/ufs/ufshci.h | 1 +
drivers/scsi/ufs/unipro.h | 7 +++++++
3 files changed, 21 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 20fa509..e0bf551 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -4071,6 +4071,17 @@ static int ufshcd_change_power_mode(struct ufs_hba *hba,
ufshcd_dme_set(hba, UIC_ARG_MIB(PA_HSSERIES),
pwr_mode->hs_rate);
+ if (hba->ufs_version >= UFSHCI_VERSION_30) {
+ if (pwr_mode->gear_tx == UFS_HS_G4)
+ /* INITIAL ADAPT */
+ ufshcd_dme_set(hba, UIC_ARG_MIB(PA_TXHSADAPTTYPE),
+ PA_INITIAL_ADAPT);
+ else
+ /* NO ADAPT */
+ ufshcd_dme_set(hba, UIC_ARG_MIB(PA_TXHSADAPTTYPE),
+ PA_NO_ADAPT);
+ }
+
ufshcd_dme_set(hba, UIC_ARG_MIB(PA_PWRMODEUSERDATA0),
DL_FC0ProtectionTimeOutVal_Default);
ufshcd_dme_set(hba, UIC_ARG_MIB(PA_PWRMODEUSERDATA1),
@@ -8449,7 +8460,8 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq)
if ((hba->ufs_version != UFSHCI_VERSION_10) &&
(hba->ufs_version != UFSHCI_VERSION_11) &&
(hba->ufs_version != UFSHCI_VERSION_20) &&
- (hba->ufs_version != UFSHCI_VERSION_21))
+ (hba->ufs_version != UFSHCI_VERSION_21) &&
+ (hba->ufs_version != UFSHCI_VERSION_30))
dev_err(hba->dev, "invalid UFS version 0x%x\n",
hba->ufs_version);
diff --git a/drivers/scsi/ufs/ufshci.h b/drivers/scsi/ufs/ufshci.h
index c2961d3..f2ee816 100644
--- a/drivers/scsi/ufs/ufshci.h
+++ b/drivers/scsi/ufs/ufshci.h
@@ -104,6 +104,7 @@ enum {
UFSHCI_VERSION_11 = 0x00010100, /* 1.1 */
UFSHCI_VERSION_20 = 0x00000200, /* 2.0 */
UFSHCI_VERSION_21 = 0x00000210, /* 2.1 */
+ UFSHCI_VERSION_30 = 0x00000300, /* 3.0 */
};
/*
diff --git a/drivers/scsi/ufs/unipro.h b/drivers/scsi/ufs/unipro.h
index 3dc4d8b..5a724b2 100644
--- a/drivers/scsi/ufs/unipro.h
+++ b/drivers/scsi/ufs/unipro.h
@@ -146,6 +146,12 @@
#define PA_SLEEPNOCONFIGTIME 0x15A2
#define PA_STALLNOCONFIGTIME 0x15A3
#define PA_SAVECONFIGTIME 0x15A4
+#define PA_TXHSADAPTTYPE 0x15D4
+
+/* Adpat type for PA_TXHSADAPTTYPE attribute */
+#define PA_REFRESH_ADAPT 0x00
+#define PA_INITIAL_ADAPT 0x01
+#define PA_NO_ADAPT 0x03
#define PA_TACTIVATE_TIME_UNIT_US 10
#define PA_HIBERN8_TIME_UNIT_US 100
@@ -203,6 +209,7 @@ enum ufs_hs_gear_tag {
UFS_HS_G1, /* HS Gear 1 (default for reset) */
UFS_HS_G2, /* HS Gear 2 */
UFS_HS_G3, /* HS Gear 3 */
+ UFS_HS_G4, /* HS Gear 4 */
};
enum ufs_unipro_ver {
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2020-02-06 8:34 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-06 8:33 [PATCH v7 0/8] UFS driver general fixes bundle 4 Can Guo
2020-02-06 8:33 ` [PATCH v7 1/8] scsi: ufs: Flush exception event before suspend Can Guo
2020-02-06 8:33 ` [PATCH v7 2/8] scsi: ufs: set load before setting voltage in regulators Can Guo
2020-02-06 8:33 ` [PATCH v7 3/8] scsi: ufs: Remove the check before call setup clock notify vops Can Guo
2020-02-06 8:33 ` [PATCH v7 4/8] scsi: ufs-qcom: Adjust bus bandwidth voting and unvoting Can Guo
2020-02-06 8:33 ` [PATCH v7 5/8] scsi: ufs: Fix ufshcd_hold() caused scheduling while atomic Can Guo
2020-02-06 10:28 ` Avri Altman
2020-02-10 1:28 ` Can Guo
2020-02-10 1:59 ` Can Guo
2020-02-10 8:23 ` Avri Altman
2020-02-06 8:33 ` [PATCH v7 6/8] scsi: ufs: Add dev ref clock gating wait time support Can Guo
2020-02-06 8:33 ` [PATCH v7 7/8] scsi: ufs-qcom: Delay specific time before gate ref clk Can Guo
2020-02-06 20:33 ` Bjorn Andersson
2020-02-07 1:09 ` Can Guo
2020-02-07 2:10 ` Bjorn Andersson
2020-02-08 0:10 ` Can Guo
2020-02-06 8:33 ` Can Guo [this message]
2020-02-06 13:20 ` [PATCH v7 8/8] scsi: ufs: Select INITIAL adapt for HS Gear4 Avri Altman
2020-02-07 2:56 ` Can Guo
2020-02-07 5:10 ` Can Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1580978008-9327-9-git-send-email-cang@codeaurora.org \
--to=cang@codeaurora.org \
--cc=alim.akhtar@samsung.com \
--cc=asutoshd@codeaurora.org \
--cc=avri.altman@wdc.com \
--cc=beanhuo@micron.com \
--cc=bvanassche@acm.org \
--cc=hongwus@codeaurora.org \
--cc=jejb@linux.ibm.com \
--cc=kernel-team@android.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=nguyenb@codeaurora.org \
--cc=rnayak@codeaurora.org \
--cc=salyzyn@google.com \
--cc=saravanak@google.com \
--cc=sousa@synopsys.com \
--cc=stanley.chu@mediatek.com \
--cc=tglx@linutronix.de \
--cc=tomas.winkler@intel.com \
--cc=venkatg@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).