* [GIT PULL] SCSI fixes for 5.8-rc1
@ 2020-06-20 17:42 James Bottomley
2020-06-21 2:30 ` pr-tracker-bot
0 siblings, 1 reply; 2+ messages in thread
From: James Bottomley @ 2020-06-20 17:42 UTC (permalink / raw)
To: Andrew Morton, Linus Torvalds; +Cc: linux-scsi, linux-kernel
One minor fix and two patches reworking the ata dma drain for the
!CONFIG_LIBATA case. The latter is a regression fix for cc97923a5bcc
("block: move dma drain handling to scsi")
The patch is available here:
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git scsi-fixes
The short changelog is:
Christoph Hellwig (2):
scsi: Wire up ata_scsi_dma_need_drain for SAS HBA drivers
scsi: libata: Provide an ata_scsi_dma_need_drain stub for !CONFIG_ATA
Dinghao Liu (1):
scsi: ufs-bsg: Fix runtime PM imbalance on error
And the diffstat:
drivers/scsi/aic94xx/aic94xx_init.c | 1 +
drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 1 +
drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 1 +
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 1 +
drivers/scsi/ipr.c | 1 +
drivers/scsi/isci/init.c | 1 +
drivers/scsi/mvsas/mv_init.c | 1 +
drivers/scsi/pm8001/pm8001_init.c | 1 +
drivers/scsi/ufs/ufs_bsg.c | 4 +++-
include/linux/libata.h | 4 ++++
10 files changed, 15 insertions(+), 1 deletion(-)
With full diff below.
James
---
diff --git a/drivers/scsi/aic94xx/aic94xx_init.c b/drivers/scsi/aic94xx/aic94xx_init.c
index d022407e5645..bef47f38dd0d 100644
--- a/drivers/scsi/aic94xx/aic94xx_init.c
+++ b/drivers/scsi/aic94xx/aic94xx_init.c
@@ -40,6 +40,7 @@ static struct scsi_host_template aic94xx_sht = {
/* .name is initialized */
.name = "aic94xx",
.queuecommand = sas_queuecommand,
+ .dma_need_drain = ata_scsi_dma_need_drain,
.target_alloc = sas_target_alloc,
.slave_configure = sas_slave_configure,
.scan_finished = asd_scan_finished,
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index 2e1718f9ade2..09a7669dad4c 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -1756,6 +1756,7 @@ static struct scsi_host_template sht_v1_hw = {
.proc_name = DRV_NAME,
.module = THIS_MODULE,
.queuecommand = sas_queuecommand,
+ .dma_need_drain = ata_scsi_dma_need_drain,
.target_alloc = sas_target_alloc,
.slave_configure = hisi_sas_slave_configure,
.scan_finished = hisi_sas_scan_finished,
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
index e7e7849a4c14..968d38702353 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
@@ -3532,6 +3532,7 @@ static struct scsi_host_template sht_v2_hw = {
.proc_name = DRV_NAME,
.module = THIS_MODULE,
.queuecommand = sas_queuecommand,
+ .dma_need_drain = ata_scsi_dma_need_drain,
.target_alloc = sas_target_alloc,
.slave_configure = hisi_sas_slave_configure,
.scan_finished = hisi_sas_scan_finished,
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index 3e6b78a1f993..55e2321a65bc 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -3075,6 +3075,7 @@ static struct scsi_host_template sht_v3_hw = {
.proc_name = DRV_NAME,
.module = THIS_MODULE,
.queuecommand = sas_queuecommand,
+ .dma_need_drain = ata_scsi_dma_need_drain,
.target_alloc = sas_target_alloc,
.slave_configure = hisi_sas_slave_configure,
.scan_finished = hisi_sas_scan_finished,
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index 7d77997d26d4..7d86f4ca266c 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -6731,6 +6731,7 @@ static struct scsi_host_template driver_template = {
.compat_ioctl = ipr_ioctl,
#endif
.queuecommand = ipr_queuecommand,
+ .dma_need_drain = ata_scsi_dma_need_drain,
.eh_abort_handler = ipr_eh_abort,
.eh_device_reset_handler = ipr_eh_dev_reset,
.eh_host_reset_handler = ipr_eh_host_reset,
diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c
index 974c3b9116d5..085e285f427d 100644
--- a/drivers/scsi/isci/init.c
+++ b/drivers/scsi/isci/init.c
@@ -153,6 +153,7 @@ static struct scsi_host_template isci_sht = {
.name = DRV_NAME,
.proc_name = DRV_NAME,
.queuecommand = sas_queuecommand,
+ .dma_need_drain = ata_scsi_dma_need_drain,
.target_alloc = sas_target_alloc,
.slave_configure = sas_slave_configure,
.scan_finished = isci_host_scan_finished,
diff --git a/drivers/scsi/mvsas/mv_init.c b/drivers/scsi/mvsas/mv_init.c
index 5973eed94938..b0de3bdb01db 100644
--- a/drivers/scsi/mvsas/mv_init.c
+++ b/drivers/scsi/mvsas/mv_init.c
@@ -33,6 +33,7 @@ static struct scsi_host_template mvs_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.queuecommand = sas_queuecommand,
+ .dma_need_drain = ata_scsi_dma_need_drain,
.target_alloc = sas_target_alloc,
.slave_configure = sas_slave_configure,
.scan_finished = mvs_scan_finished,
diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c
index a8f5344fdfda..9e99262a2b9d 100644
--- a/drivers/scsi/pm8001/pm8001_init.c
+++ b/drivers/scsi/pm8001/pm8001_init.c
@@ -87,6 +87,7 @@ static struct scsi_host_template pm8001_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.queuecommand = sas_queuecommand,
+ .dma_need_drain = ata_scsi_dma_need_drain,
.target_alloc = sas_target_alloc,
.slave_configure = sas_slave_configure,
.scan_finished = pm8001_scan_finished,
diff --git a/drivers/scsi/ufs/ufs_bsg.c b/drivers/scsi/ufs/ufs_bsg.c
index 53dd87628cbe..516a7f573942 100644
--- a/drivers/scsi/ufs/ufs_bsg.c
+++ b/drivers/scsi/ufs/ufs_bsg.c
@@ -106,8 +106,10 @@ static int ufs_bsg_request(struct bsg_job *job)
desc_op = bsg_request->upiu_req.qr.opcode;
ret = ufs_bsg_alloc_desc_buffer(hba, job, &desc_buff,
&desc_len, desc_op);
- if (ret)
+ if (ret) {
+ pm_runtime_put_sync(hba->dev);
goto out;
+ }
/* fall through */
case UPIU_TRANSACTION_NOP_OUT:
diff --git a/include/linux/libata.h b/include/linux/libata.h
index af832852e620..042e584daca7 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -1092,7 +1092,11 @@ extern int ata_scsi_ioctl(struct scsi_device *dev, unsigned int cmd,
#define ATA_SCSI_COMPAT_IOCTL /* empty */
#endif
extern int ata_scsi_queuecmd(struct Scsi_Host *h, struct scsi_cmnd *cmd);
+#if IS_ENABLED(CONFIG_ATA)
bool ata_scsi_dma_need_drain(struct request *rq);
+#else
+#define ata_scsi_dma_need_drain NULL
+#endif
extern int ata_sas_scsi_ioctl(struct ata_port *ap, struct scsi_device *dev,
unsigned int cmd, void __user *arg);
extern bool ata_link_online(struct ata_link *link);
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [GIT PULL] SCSI fixes for 5.8-rc1
2020-06-20 17:42 [GIT PULL] SCSI fixes for 5.8-rc1 James Bottomley
@ 2020-06-21 2:30 ` pr-tracker-bot
0 siblings, 0 replies; 2+ messages in thread
From: pr-tracker-bot @ 2020-06-21 2:30 UTC (permalink / raw)
To: James Bottomley; +Cc: Andrew Morton, Linus Torvalds, linux-scsi, linux-kernel
The pull request you sent on Sat, 20 Jun 2020 10:42:16 -0700:
> git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git scsi-fixes
has been merged into torvalds/linux.git:
https://git.kernel.org/torvalds/c/64677779e8962c20b580b471790fe42367750599
Thank you!
--
Deet-doot-dot, I am a bot.
https://korg.wiki.kernel.org/userdoc/prtracker
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2020-06-21 2:30 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2020-06-20 17:42 [GIT PULL] SCSI fixes for 5.8-rc1 James Bottomley
2020-06-21 2:30 ` pr-tracker-bot
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox