public inbox for linux-scsi@vger.kernel.org
 help / color / mirror / Atom feed
From: John Garry <john.garry@huawei.com>
To: <axboe@kernel.dk>, <jejb@linux.ibm.com>,
	<martin.petersen@oracle.com>, <don.brace@microsemi.com>,
	<kashyap.desai@broadcom.com>, <ming.lei@redhat.com>,
	<bvanassche@acm.org>, <dgilbert@interlog.com>,
	<paolo.valente@linaro.org>, <hare@suse.de>, <hch@lst.de>
Cc: <sumit.saxena@broadcom.com>, <linux-block@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <linux-scsi@vger.kernel.org>,
	<esc.storagedev@microsemi.com>, <megaraidlinux.pdl@broadcom.com>,
	<chenxiang66@hisilicon.com>, <luojiaxing@huawei.com>,
	John Garry <john.garry@huawei.com>
Subject: [PATCH v8 16/18] hpsa: enable host_tagset and switch to MQ
Date: Wed, 19 Aug 2020 23:20:34 +0800	[thread overview]
Message-ID: <1597850436-116171-17-git-send-email-john.garry@huawei.com> (raw)
In-Reply-To: <1597850436-116171-1-git-send-email-john.garry@huawei.com>

From: Hannes Reinecke <hare@suse.de>

The smart array HBAs can steer interrupt completion, so this
patch switches the implementation to use multiqueue and enables
'host_tagset' as the HBA has a shared host-wide tagset.

Reviewed-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: John Garry <john.garry@huawei.com>
---
 drivers/scsi/hpsa.c | 44 +++++++-------------------------------------
 drivers/scsi/hpsa.h |  1 -
 2 files changed, 7 insertions(+), 38 deletions(-)

diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 91794a50b31f..eaddcd3e9caf 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -984,6 +984,7 @@ static struct scsi_host_template hpsa_driver_template = {
 	.shost_attrs = hpsa_shost_attrs,
 	.max_sectors = 2048,
 	.no_write_same = 1,
+	.host_tagset = 1,
 };
 
 static inline u32 next_command(struct ctlr_info *h, u8 q)
@@ -1148,12 +1149,14 @@ static void dial_up_lockup_detection_on_fw_flash_complete(struct ctlr_info *h,
 static void __enqueue_cmd_and_start_io(struct ctlr_info *h,
 	struct CommandList *c, int reply_queue)
 {
+	u32 blk_tag = blk_mq_unique_tag(c->scsi_cmd->request);
+
 	dial_down_lockup_detection_during_fw_flash(h, c);
 	atomic_inc(&h->commands_outstanding);
 	if (c->device)
 		atomic_inc(&c->device->commands_outstanding);
 
-	reply_queue = h->reply_map[raw_smp_processor_id()];
+	reply_queue = blk_mq_unique_tag_to_hwq(blk_tag);
 	switch (c->cmd_type) {
 	case CMD_IOACCEL1:
 		set_ioaccel1_performant_mode(h, c, reply_queue);
@@ -5676,8 +5679,6 @@ static int hpsa_scsi_queue_command(struct Scsi_Host *sh, struct scsi_cmnd *cmd)
 	/* Get the ptr to our adapter structure out of cmd->host. */
 	h = sdev_to_hba(cmd->device);
 
-	BUG_ON(cmd->request->tag < 0);
-
 	dev = cmd->device->hostdata;
 	if (!dev) {
 		cmd->result = DID_NO_CONNECT << 16;
@@ -5853,7 +5854,7 @@ static int hpsa_scsi_host_alloc(struct ctlr_info *h)
 	sh->hostdata[0] = (unsigned long) h;
 	sh->irq = pci_irq_vector(h->pdev, 0);
 	sh->unique_id = sh->irq;
-
+	sh->nr_hw_queues = h->msix_vectors > 0 ? h->msix_vectors : 1;
 	h->scsi_host = sh;
 	return 0;
 }
@@ -5879,7 +5880,8 @@ static int hpsa_scsi_add_host(struct ctlr_info *h)
  */
 static int hpsa_get_cmd_index(struct scsi_cmnd *scmd)
 {
-	int idx = scmd->request->tag;
+	u32 blk_tag = blk_mq_unique_tag(scmd->request);
+	int idx = blk_mq_unique_tag_to_tag(blk_tag);
 
 	if (idx < 0)
 		return idx;
@@ -7456,26 +7458,6 @@ static void hpsa_disable_interrupt_mode(struct ctlr_info *h)
 	h->msix_vectors = 0;
 }
 
-static void hpsa_setup_reply_map(struct ctlr_info *h)
-{
-	const struct cpumask *mask;
-	unsigned int queue, cpu;
-
-	for (queue = 0; queue < h->msix_vectors; queue++) {
-		mask = pci_irq_get_affinity(h->pdev, queue);
-		if (!mask)
-			goto fallback;
-
-		for_each_cpu(cpu, mask)
-			h->reply_map[cpu] = queue;
-	}
-	return;
-
-fallback:
-	for_each_possible_cpu(cpu)
-		h->reply_map[cpu] = 0;
-}
-
 /* If MSI/MSI-X is supported by the kernel we will try to enable it on
  * controllers that are capable. If not, we use legacy INTx mode.
  */
@@ -7872,9 +7854,6 @@ static int hpsa_pci_init(struct ctlr_info *h)
 	if (err)
 		goto clean1;
 
-	/* setup mapping between CPU and reply queue */
-	hpsa_setup_reply_map(h);
-
 	err = hpsa_pci_find_memory_BAR(h->pdev, &h->paddr);
 	if (err)
 		goto clean2;	/* intmode+region, pci */
@@ -8613,7 +8592,6 @@ static struct workqueue_struct *hpsa_create_controller_wq(struct ctlr_info *h,
 
 static void hpda_free_ctlr_info(struct ctlr_info *h)
 {
-	kfree(h->reply_map);
 	kfree(h);
 }
 
@@ -8622,14 +8600,6 @@ static struct ctlr_info *hpda_alloc_ctlr_info(void)
 	struct ctlr_info *h;
 
 	h = kzalloc(sizeof(*h), GFP_KERNEL);
-	if (!h)
-		return NULL;
-
-	h->reply_map = kcalloc(nr_cpu_ids, sizeof(*h->reply_map), GFP_KERNEL);
-	if (!h->reply_map) {
-		kfree(h);
-		return NULL;
-	}
 	return h;
 }
 
diff --git a/drivers/scsi/hpsa.h b/drivers/scsi/hpsa.h
index 6b87d9815b35..9c6a161f2367 100644
--- a/drivers/scsi/hpsa.h
+++ b/drivers/scsi/hpsa.h
@@ -161,7 +161,6 @@ struct bmic_controller_parameters {
 #pragma pack()
 
 struct ctlr_info {
-	unsigned int *reply_map;
 	int	ctlr;
 	char	devname[8];
 	char    *product_name;
-- 
2.26.2


  parent reply	other threads:[~2020-08-19 15:25 UTC|newest]

Thread overview: 58+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-19 15:20 [PATCH v8 00/18] blk-mq/scsi: Provide hostwide shared tags for SCSI HBAs John Garry
2020-08-19 15:20 ` [PATCH v8 01/18] blk-mq: Rename BLK_MQ_F_TAG_SHARED as BLK_MQ_F_TAG_QUEUE_SHARED John Garry
2020-08-19 15:20 ` [PATCH v8 02/18] blk-mq: Rename blk_mq_update_tag_set_depth() John Garry
2020-08-19 15:20 ` [PATCH v8 03/18] blk-mq: Free tags in blk_mq_init_tags() upon error John Garry
2020-08-19 15:20 ` [PATCH v8 04/18] blk-mq: Pass flags for tag init/free John Garry
2020-08-19 15:20 ` [PATCH v8 05/18] blk-mq: Use pointers for blk_mq_tags bitmap tags John Garry
2020-08-19 15:20 ` [PATCH v8 06/18] blk-mq: Facilitate a shared sbitmap per tagset John Garry
2020-08-19 15:20 ` [PATCH v8 07/18] blk-mq: Relocate hctx_may_queue() John Garry
2020-08-19 15:20 ` [PATCH v8 08/18] blk-mq: Record nr_active_requests per queue for when using shared sbitmap John Garry
2020-08-19 15:20 ` [PATCH v8 09/18] blk-mq: Record active_queues_shared_sbitmap per tag_set " John Garry
2020-08-19 15:20 ` [PATCH v8 10/18] blk-mq, elevator: Count requests per hctx to improve performance John Garry
2020-08-19 15:20 ` [PATCH v8 11/18] null_blk: Support shared tag bitmap John Garry
2020-08-19 15:20 ` [PATCH v8 12/18] scsi: Add host and host template flag 'host_tagset' John Garry
2020-08-19 15:20 ` [PATCH v8 13/18] scsi: core: Show nr_hw_queues in sysfs John Garry
2020-09-10  8:33   ` John Garry
2020-08-19 15:20 ` [PATCH v8 14/18] scsi: hisi_sas: Switch v3 hw to MQ John Garry
2020-08-19 15:20 ` [PATCH v8 15/18] scsi: scsi_debug: Support host tagset John Garry
2020-08-19 15:20 ` John Garry [this message]
2020-08-19 15:20 ` [PATCH v8 17/18] scsi: megaraid_sas: Added support for shared host tagset for cpuhotplug John Garry
2020-11-02 14:17   ` Qian Cai
2020-11-02 14:31     ` Kashyap Desai
2020-11-02 15:24       ` Qian Cai
2020-11-02 14:51     ` John Garry
2020-11-02 15:18       ` Qian Cai
2020-11-03 10:54         ` John Garry
2020-11-03 13:04           ` Qian Cai
2020-11-04 15:21             ` Qian Cai
2020-11-04 16:07               ` Kashyap Desai
2020-11-04 18:08                 ` John Garry
2020-11-06 19:25                   ` Sumit Saxena
2020-11-07  0:17                     ` Qian Cai
2020-11-09  8:49                       ` John Garry
2020-11-09 13:39                         ` Qian Cai
2020-11-09 14:05                           ` John Garry
2020-11-10 17:42                             ` John Garry
2020-11-11  7:27                               ` Sumit Saxena
2020-11-11  9:27                                 ` Ming Lei
2020-11-11 11:36                                   ` Sumit Saxena
2020-11-11 14:42                                   ` Qian Cai
2020-11-11 15:04                                     ` Ming Lei
2020-11-11 11:51                                 ` John Garry
2020-08-19 15:20 ` [PATCH v8 18/18] smartpqi: enable host tagset John Garry
2020-08-27  8:53 ` [PATCH v8 00/18] blk-mq/scsi: Provide hostwide shared tags for SCSI HBAs John Garry
2020-09-03 19:28 ` Douglas Gilbert
2020-09-03 21:23 ` Jens Axboe
2020-09-04  9:09   ` John Garry
2020-09-04 12:44     ` Martin K. Petersen
2020-09-16  7:21       ` John Garry
2020-09-17  1:10         ` Martin K. Petersen
2020-09-17  6:48           ` John Garry
2020-09-21 21:35             ` Don.Brace
2020-09-21 22:15               ` John Garry
2020-09-22  9:03                 ` John Garry
2020-09-28 16:11           ` Kashyap Desai
2020-10-06 14:24             ` John Garry
2020-10-06 14:42               ` Jens Axboe
2020-09-08 12:46 ` Hannes Reinecke
2020-09-08 13:38   ` John Garry

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1597850436-116171-17-git-send-email-john.garry@huawei.com \
    --to=john.garry@huawei.com \
    --cc=axboe@kernel.dk \
    --cc=bvanassche@acm.org \
    --cc=chenxiang66@hisilicon.com \
    --cc=dgilbert@interlog.com \
    --cc=don.brace@microsemi.com \
    --cc=esc.storagedev@microsemi.com \
    --cc=hare@suse.de \
    --cc=hch@lst.de \
    --cc=jejb@linux.ibm.com \
    --cc=kashyap.desai@broadcom.com \
    --cc=linux-block@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=luojiaxing@huawei.com \
    --cc=martin.petersen@oracle.com \
    --cc=megaraidlinux.pdl@broadcom.com \
    --cc=ming.lei@redhat.com \
    --cc=paolo.valente@linaro.org \
    --cc=sumit.saxena@broadcom.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox