From: Nitin Rawat <nitirawa@codeaurora.org>
To: asutoshd@codeaurora.org, cang@codeaurora.org,
stummala@codeaurora.org, vbadigan@codeaurora.org,
alim.akhtar@samsung.com, avri.altman@wdc.com, jejb@linux.ibm.com,
martin.petersen@oracle.com, stanley.chu@mediatek.com,
beanhuo@micron.com, bjorn.andersson@linaro.org,
adrian.hunter@intel.com, bvanassche@acm.org
Cc: linux-scsi@vger.kernel.org, linux-kernel@vger.kernel.org,
Nitin Rawat <nitirawa@codeaurora.org>
Subject: [PATCH V2 2/3] scsi: ufs: add a vops to configure VCC voltage level
Date: Mon, 22 Mar 2021 03:27:36 +0530 [thread overview]
Message-ID: <1616363857-26760-3-git-send-email-nitirawa@codeaurora.org> (raw)
In-Reply-To: <1616363857-26760-1-git-send-email-nitirawa@codeaurora.org>
Add a vops to configure VCC voltage VCC voltage level
for platform supporting both ufs2.x and ufs 3.x devices.
Suggested-by: Stanley Chu <stanley.chu@mediatek.com>
Suggested-by: Asutosh Das <asutoshd@codeaurora.org>
Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Nitin Rawat <nitirawa@codeaurora.org>
Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org>
---
drivers/scsi/ufs/ufshcd.c | 4 ++++
drivers/scsi/ufs/ufshcd.h | 10 ++++++++++
2 files changed, 14 insertions(+)
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 633ca8e..5bfe987 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -7763,6 +7763,10 @@ static int ufshcd_add_lus(struct ufs_hba *hba)
goto out;
ufshcd_clear_ua_wluns(hba);
+ if (ufshcd_vops_setup_vcc_regulators(hba))
+ dev_err(hba->dev,
+ "%s: Failed to set the VCC regulator values, continue with 2.7v\n",
+ __func__);
/* Initialize devfreq after UFS device is detected */
if (ufshcd_is_clkscaling_supported(hba)) {
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index 0db796a..8f0945d 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -324,6 +324,7 @@ struct ufs_pwr_mode_info {
* @device_reset: called to issue a reset pulse on the UFS device
* @program_key: program or evict an inline encryption key
* @event_notify: called to notify important events
+ * @setup_vcc_regulators : update vcc regulator level
*/
struct ufs_hba_variant_ops {
const char *name;
@@ -360,6 +361,7 @@ struct ufs_hba_variant_ops {
const union ufs_crypto_cfg_entry *cfg, int slot);
void (*event_notify)(struct ufs_hba *hba,
enum ufs_event_type evt, void *data);
+ int (*setup_vcc_regulators)(struct ufs_hba *hba);
};
/* clock gating state */
@@ -1269,6 +1271,14 @@ static inline void ufshcd_vops_config_scaling_param(struct ufs_hba *hba,
hba->vops->config_scaling_param(hba, profile, data);
}
+static inline int ufshcd_vops_setup_vcc_regulators(struct ufs_hba *hba)
+{
+ if (hba->vops && hba->vops->setup_vcc_regulators)
+ return hba->vops->setup_vcc_regulators(hba);
+
+ return 0;
+}
+
extern struct ufs_pm_lvl_states ufs_pm_lvl_states[];
/*
--
2.7.4
next prev parent reply other threads:[~2021-03-21 21:59 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-21 21:57 [PATCH V2 0/3] scsi: ufs: Add a vops to configure VCC voltage level Nitin Rawat
2021-03-21 21:57 ` [PATCH V2 1/3] scsi: ufs: export api for use in vendor file Nitin Rawat
2021-03-21 21:57 ` Nitin Rawat [this message]
2021-03-31 18:00 ` [PATCH V2 2/3] scsi: ufs: add a vops to configure VCC voltage level Asutosh Das (asd)
2021-04-01 15:00 ` nitirawa
2021-04-01 15:03 ` nitirawa
2021-03-21 21:57 ` [PATCH V2 3/3] scsi: ufs-qcom: configure VCC voltage level in vendor file Nitin Rawat
2021-03-23 15:28 ` Bjorn Andersson
2021-03-24 21:55 ` nitirawa
2021-03-31 18:19 ` Bjorn Andersson
2021-04-01 14:58 ` nitirawa
2021-04-01 15:12 ` Bjorn Andersson
2021-05-26 7:23 ` nitirawa
2021-06-03 20:31 ` nitirawa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1616363857-26760-3-git-send-email-nitirawa@codeaurora.org \
--to=nitirawa@codeaurora.org \
--cc=adrian.hunter@intel.com \
--cc=alim.akhtar@samsung.com \
--cc=asutoshd@codeaurora.org \
--cc=avri.altman@wdc.com \
--cc=beanhuo@micron.com \
--cc=bjorn.andersson@linaro.org \
--cc=bvanassche@acm.org \
--cc=cang@codeaurora.org \
--cc=jejb@linux.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=stanley.chu@mediatek.com \
--cc=stummala@codeaurora.org \
--cc=vbadigan@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox