[PATCH] scsi: hisi_sas: Undo RPM resume for failed notify phy event for v3 HW

[John Garry <john.garry@huawei.com>]

From: Xiang Chen <chenxiang66@hisilicon.com>

If we fail to notify the phy up event then undo the RPM resume, as the
phy up notify event handling pairs with that RPM resume.

Tested-by: Yihang Li <liyihang6@hisilicon.com>
Reported-by: Yihang Li <liyihang6@hisilicon.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
---
Please consider for 5.19, thanks!

diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index 79f87d7c3e68..7d819fc0395e 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -1563,9 +1563,15 @@ static irqreturn_t phy_up_v3_hw(int phy_no, struct hisi_hba *hisi_hba)
 
 	phy->port_id = port_id;
 
-	/* Call pm_runtime_put_sync() with pairs in hisi_sas_phyup_pm_work() */
+	/*
+	 * Call pm_runtime_get_noresume() which pairs with
+	 * hisi_sas_phyup_pm_work() -> pm_runtime_put_sync().
+	 * For failure call pm_runtime_put() as we are in a hardirq context.
+	 */
 	pm_runtime_get_noresume(dev);
-	hisi_sas_notify_phy_event(phy, HISI_PHYE_PHY_UP_PM);
+	res = hisi_sas_notify_phy_event(phy, HISI_PHYE_PHY_UP_PM);
+	if (!res)
+		pm_runtime_put(dev);
 
 	res = IRQ_HANDLED;
 
-- 
2.26.2