From: merez@codeaurora.org
Cc: Vinayak Holikatti <vinholikatti@gmail.com>,
Santosh Y <santoshsy@gmail.com>,
"James E.J. Bottomley" <jbottomley@parallels.com>,
linux-scsi@vger.kernel.org,
Sujit Reddy Thumma <sthumma@codeaurora.org>,
linux-arm-msm@vger.kernel.org
Subject: Re: [PATCH V3 2/2] scsi: ufs: Add runtime PM support for UFS host controller driver
Date: Tue, 9 Jul 2013 10:41:24 -0000 [thread overview]
Message-ID: <1aace10c46b439fab7952d8d107dd977.squirrel@www.codeaurora.org> (raw)
In-Reply-To: <1373361336-30713-3-git-send-email-sthumma@codeaurora.org>
Tested-by: Maya Erez <merez@codeaurora.org>
> Add runtime PM helpers to suspend/resume UFS controller at runtime.
> Enable runtime PM by default for pci and platform drivers as the
> initialized hardware can suspend if it is not used after bootup.
>
> Signed-off-by: Sujit Reddy Thumma <sthumma@codeaurora.org>
> ---
> drivers/scsi/ufs/ufshcd-pci.c | 65
> ++++++++++++++++++++++++++++++++++---
> drivers/scsi/ufs/ufshcd-pltfrm.c | 51 +++++++++++++++++++++++++++++-
> drivers/scsi/ufs/ufshcd.c | 8 +++++
> 3 files changed, 117 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/scsi/ufs/ufshcd-pci.c b/drivers/scsi/ufs/ufshcd-pci.c
> index 48be39a..7bd8faa 100644
> --- a/drivers/scsi/ufs/ufshcd-pci.c
> +++ b/drivers/scsi/ufs/ufshcd-pci.c
> @@ -35,6 +35,7 @@
>
> #include "ufshcd.h"
> #include <linux/pci.h>
> +#include <linux/pm_runtime.h>
>
> #ifdef CONFIG_PM
> /**
> @@ -44,7 +45,7 @@
> *
> * Returns -ENOSYS
> */
> -static int ufshcd_pci_suspend(struct pci_dev *pdev, pm_message_t state)
> +static int ufshcd_pci_suspend(struct device *dev)
> {
> /*
> * TODO:
> @@ -61,7 +62,7 @@ static int ufshcd_pci_suspend(struct pci_dev *pdev,
> pm_message_t state)
> *
> * Returns -ENOSYS
> */
> -static int ufshcd_pci_resume(struct pci_dev *pdev)
> +static int ufshcd_pci_resume(struct device *dev)
> {
> /*
> * TODO:
> @@ -71,8 +72,48 @@ static int ufshcd_pci_resume(struct pci_dev *pdev)
>
> return -ENOSYS;
> }
> +#else
> +#define ufshcd_pci_suspend NULL
> +#define ufshcd_pci_resume NULL
> #endif /* CONFIG_PM */
>
> +#ifdef CONFIG_PM_RUNTIME
> +static int ufshcd_pci_runtime_suspend(struct device *dev)
> +{
> + struct pci_dev *pdev = container_of(dev, struct pci_dev, dev);
> + struct ufs_hba *hba = pci_get_drvdata(pdev);
> +
> + if (!hba)
> + return 0;
> +
> + return ufshcd_runtime_suspend(hba);
> +}
> +static int ufshcd_pci_runtime_resume(struct device *dev)
> +{
> + struct pci_dev *pdev = container_of(dev, struct pci_dev, dev);
> + struct ufs_hba *hba = pci_get_drvdata(pdev);
> +
> + if (!hba)
> + return 0;
> +
> + return ufshcd_runtime_resume(hba);
> +}
> +static int ufshcd_pci_runtime_idle(struct device *dev)
> +{
> + struct pci_dev *pdev = container_of(dev, struct pci_dev, dev);
> + struct ufs_hba *hba = pci_get_drvdata(pdev);
> +
> + if (!hba)
> + return 0;
> +
> + return ufshcd_runtime_idle(hba);
> +}
> +#else /* !CONFIG_PM_RUNTIME */
> +#define ufshcd_pci_runtime_suspend NULL
> +#define ufshcd_pci_runtime_resume NULL
> +#define ufshcd_pci_runtime_idle NULL
> +#endif /* CONFIG_PM_RUNTIME */
> +
> /**
> * ufshcd_pci_shutdown - main function to put the controller in reset
> state
> * @pdev: pointer to PCI device handle
> @@ -91,6 +132,9 @@ static void ufshcd_pci_remove(struct pci_dev *pdev)
> {
> struct ufs_hba *hba = pci_get_drvdata(pdev);
>
> + pm_runtime_forbid(&pdev->dev);
> + pm_runtime_get_noresume(&pdev->dev);
> +
> disable_irq(pdev->irq);
> ufshcd_remove(hba);
> pci_release_regions(pdev);
> @@ -168,6 +212,8 @@ ufshcd_pci_probe(struct pci_dev *pdev, const struct
> pci_device_id *id)
> }
>
> pci_set_drvdata(pdev, hba);
> + pm_runtime_put_noidle(&pdev->dev);
> + pm_runtime_allow(&pdev->dev);
>
> return 0;
>
> @@ -182,6 +228,14 @@ out_error:
> return err;
> }
>
> +static const struct dev_pm_ops ufshcd_pci_pm_ops = {
> + .suspend = ufshcd_pci_suspend,
> + .resume = ufshcd_pci_resume,
> + .runtime_suspend = ufshcd_pci_runtime_suspend,
> + .runtime_resume = ufshcd_pci_runtime_resume,
> + .runtime_idle = ufshcd_pci_runtime_idle,
> +};
> +
> static DEFINE_PCI_DEVICE_TABLE(ufshcd_pci_tbl) = {
> { PCI_VENDOR_ID_SAMSUNG, 0xC00C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
> { } /* terminate list */
> @@ -195,10 +249,9 @@ static struct pci_driver ufshcd_pci_driver = {
> .probe = ufshcd_pci_probe,
> .remove = ufshcd_pci_remove,
> .shutdown = ufshcd_pci_shutdown,
> -#ifdef CONFIG_PM
> - .suspend = ufshcd_pci_suspend,
> - .resume = ufshcd_pci_resume,
> -#endif
> + .driver = {
> + .pm = &ufshcd_pci_pm_ops
> + },
> };
>
> module_pci_driver(ufshcd_pci_driver);
> diff --git a/drivers/scsi/ufs/ufshcd-pltfrm.c
> b/drivers/scsi/ufs/ufshcd-pltfrm.c
> index c42db40..b1f2605 100644
> --- a/drivers/scsi/ufs/ufshcd-pltfrm.c
> +++ b/drivers/scsi/ufs/ufshcd-pltfrm.c
> @@ -34,6 +34,7 @@
> */
>
> #include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
>
> #include "ufshcd.h"
>
> @@ -87,6 +88,43 @@ static int ufshcd_pltfrm_resume(struct device *dev)
> #define ufshcd_pltfrm_resume NULL
> #endif
>
> +#ifdef CONFIG_PM_RUNTIME
> +static int ufshcd_pltfrm_runtime_suspend(struct device *dev)
> +{
> + struct platform_device *pdev = to_platform_device(dev);
> + struct ufs_hba *hba = platform_get_drvdata(pdev);
> +
> + if (!hba)
> + return 0;
> +
> + return ufshcd_runtime_suspend(hba);
> +}
> +static int ufshcd_pltfrm_runtime_resume(struct device *dev)
> +{
> + struct platform_device *pdev = to_platform_device(dev);
> + struct ufs_hba *hba = platform_get_drvdata(pdev);
> +
> + if (!hba)
> + return 0;
> +
> + return ufshcd_runtime_resume(hba);
> +}
> +static int ufshcd_pltfrm_runtime_idle(struct device *dev)
> +{
> + struct platform_device *pdev = to_platform_device(dev);
> + struct ufs_hba *hba = platform_get_drvdata(pdev);
> +
> + if (!hba)
> + return 0;
> +
> + return ufshcd_runtime_idle(hba);
> +}
> +#else /* !CONFIG_PM_RUNTIME */
> +#define ufshcd_pltfrm_runtime_suspend NULL
> +#define ufshcd_pltfrm_runtime_resume NULL
> +#define ufshcd_pltfrm_runtime_idle NULL
> +#endif /* CONFIG_PM_RUNTIME */
> +
> /**
> * ufshcd_pltfrm_probe - probe routine of the driver
> * @pdev: pointer to Platform device handle
> @@ -122,14 +160,20 @@ static int ufshcd_pltfrm_probe(struct
> platform_device *pdev)
> goto out;
> }
>
> + pm_runtime_set_active(&pdev->dev);
> + pm_runtime_enable(&pdev->dev);
> +
> err = ufshcd_init(dev, &hba, mmio_base, irq);
> if (err) {
> dev_err(dev, "Intialization failed\n");
> - goto out;
> + goto out_disable_rpm;
> }
>
> platform_set_drvdata(pdev, hba);
>
> +out_disable_rpm:
> + pm_runtime_disable(&pdev->dev);
> + pm_runtime_set_suspended(&pdev->dev);
> out:
> return err;
> }
> @@ -144,6 +188,8 @@ static int ufshcd_pltfrm_remove(struct platform_device
> *pdev)
> {
> struct ufs_hba *hba = platform_get_drvdata(pdev);
>
> + pm_runtime_get_sync(&(pdev)->dev);
> +
> disable_irq(hba->irq);
> ufshcd_remove(hba);
> return 0;
> @@ -157,6 +203,9 @@ static const struct of_device_id ufs_of_match[] = {
> static const struct dev_pm_ops ufshcd_dev_pm_ops = {
> .suspend = ufshcd_pltfrm_suspend,
> .resume = ufshcd_pltfrm_resume,
> + .runtime_suspend = ufshcd_pltfrm_runtime_suspend,
> + .runtime_resume = ufshcd_pltfrm_runtime_resume,
> + .runtime_idle = ufshcd_pltfrm_runtime_idle,
> };
>
> static struct platform_driver ufshcd_pltfrm_driver = {
> diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
> index a25de66..af7d01d 100644
> --- a/drivers/scsi/ufs/ufshcd.c
> +++ b/drivers/scsi/ufs/ufshcd.c
> @@ -2230,6 +2230,7 @@ static void ufshcd_exception_event_handler(struct
> work_struct *work)
> u32 status = 0;
> hba = container_of(work, struct ufs_hba, eeh_work);
>
> + pm_runtime_get_sync(hba->dev);
> err = ufshcd_get_ee_status(hba, &status);
> if (err) {
> dev_err(hba->dev, "%s: failed to get exception status %d\n",
> @@ -2245,6 +2246,7 @@ static void ufshcd_exception_event_handler(struct
> work_struct *work)
> __func__, err);
> }
> out:
> + pm_runtime_put_sync(hba->dev);
> return;
> }
>
> @@ -2257,9 +2259,11 @@ static void ufshcd_fatal_err_handler(struct
> work_struct *work)
> struct ufs_hba *hba;
> hba = container_of(work, struct ufs_hba, feh_workq);
>
> + pm_runtime_get_sync(hba->dev);
> /* check if reset is already in progress */
> if (hba->ufshcd_state != UFSHCD_STATE_RESET)
> ufshcd_do_reset(hba);
> + pm_runtime_put_sync(hba->dev);
> }
>
> /**
> @@ -2562,6 +2566,7 @@ static void ufshcd_async_scan(void *data,
> async_cookie_t cookie)
> hba->auto_bkops_enabled = false;
> ufshcd_enable_auto_bkops(hba);
> scsi_scan_host(hba->host);
> + pm_runtime_put_sync(hba->dev);
> out:
> return;
> }
> @@ -2783,6 +2788,9 @@ int ufshcd_init(struct device *dev, struct ufs_hba
> **hba_handle,
>
> *hba_handle = hba;
>
> + /* Hold auto suspend until async scan completes */
> + pm_runtime_get_sync(dev);
> +
> async_schedule(ufshcd_async_scan, hba);
>
> return 0;
> --
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
> of Code Aurora Forum, hosted by The Linux Foundation.
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
Maya Erez
QUALCOMM ISRAEL, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
next prev parent reply other threads:[~2013-07-09 10:41 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-09 9:15 [PATCH V3 0/2] scsi: ufs: Add support to control UFS device background operations Sujit Reddy Thumma
2013-07-09 9:15 ` [PATCH V3 1/2] scsi: ufs: Add support for host assisted " Sujit Reddy Thumma
2013-07-09 10:41 ` merez
2013-07-10 13:31 ` Seungwon Jeon
2013-07-11 9:57 ` Sujit Reddy Thumma
2013-07-17 8:13 ` Seungwon Jeon
2013-07-18 3:48 ` Sujit Reddy Thumma
2013-07-19 13:56 ` Seungwon Jeon
2013-07-19 18:26 ` Sujit Reddy Thumma
2013-07-09 9:15 ` [PATCH V3 2/2] scsi: ufs: Add runtime PM support for UFS host controller driver Sujit Reddy Thumma
2013-07-09 10:41 ` merez [this message]
2013-07-10 13:31 ` Seungwon Jeon
2013-07-11 10:27 ` Sujit Reddy Thumma
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1aace10c46b439fab7952d8d107dd977.squirrel@www.codeaurora.org \
--to=merez@codeaurora.org \
--cc=jbottomley@parallels.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=santoshsy@gmail.com \
--cc=sthumma@codeaurora.org \
--cc=vinholikatti@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).