From: Dionysius Wilson Almeida <dwilson@yenveedu.com>
To: Douglas Gilbert <dougg@torque.net>
Cc: linux-scsi@vger.kernel.org
Subject: Re: Problem : QLogic QLA104x PCI SCSI Adapter with HP CDWriter+ 9200
Date: Tue, 23 Apr 2002 11:02:12 +0530 [thread overview]
Message-ID: <20020423110212.A24069@yenveedu.com> (raw)
In-Reply-To: <3CC09BEF.3491B987@torque.net>; from dougg@torque.net on Fri, Apr 19, 2002 at 06:36:31PM -0400
Hi,
The timeout problem is resolved by using safe option under host adapter
settings. But still i'm unable to mount any CD on this drive even though it
plays normal audio CDs fine and also writes CDs properly.
-Wilson
* Douglas Gilbert (dougg@torque.net) wrote:
> Dionysius Wilson Almeida wrote:
> >
> > Hi Everyone,
> >
> > I'm using QLogic QLA104x PCI SCSI Adapter with HP CDWriter+ 9200.
> > The QLogic BIOS version is 6.14, ISP Firmware 4.50.
> >
> > During the bootup, I see :
> >
> > scsi : aborting command due to timeout : pid 6, scsi0, channel 0, id 6, lun 0 0x12 00 00 00 ff 00
> >
> > But eventually it recognizes the CD Writer and configures it.
>
> This looks like a scsi bus termination problem.
>
> It seems as though the QLogic controller is ultra wide (16 bit)
> while the HP cdwriter is "scsi-2" (8 bit wide) and is the only
> thing on the scsi bus. How are you terminating the scsi bus with
> this configuration?
>
> Doug Gilbert
> -
> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
prev parent reply other threads:[~2002-04-23 5:32 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-04-19 13:17 Problem : QLogic QLA104x PCI SCSI Adapter with HP CDWriter+ 9200 Dionysius Wilson Almeida
2002-04-19 22:36 ` Douglas Gilbert
2002-04-23 5:32 ` Dionysius Wilson Almeida [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20020423110212.A24069@yenveedu.com \
--to=dwilson@yenveedu.com \
--cc=dougg@torque.net \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox