From: "Thomas Langås" <tlan@stud.ntnu.no>
To: Mike Anderson <andmike@us.ibm.com>
Cc: linux-scsi@vger.kernel.org
Subject: Re: Weird Qlogic 2200 FC HBA / CNSI G7324 problem
Date: Fri, 12 Jul 2002 02:45:11 +0200 [thread overview]
Message-ID: <20020712024511.A15943@stud.ntnu.no> (raw)
In-Reply-To: <20020711164141.B8468@beaverton.ibm.com>; from andmike@us.ibm.com on Thu, Jul 11, 2002 at 04:41:41PM -0700
Mike Anderson:
> Can you send the output of "/proc/scsi/qla2200/1" and "/proc/scsi/qla2200/2"
test3:~# cat /proc/scsi/qla2200/1
QLogic PCI to Fibre Channel Host Adapter for ISP22xx/ISP23xx:
Firmware version: 2.02.03, Driver version 6.1b2
Entry address = f883a060
HBA: QLA2200 , Serial# B50409
Request Queue = 0x32d58000, Response Queue = 0x32d50000
Request Queue count= 128, Response Queue count= 64
Total number of active commands = 0
Total number of interrupts = 352
Total number of IOCBs (used/max) = (0/600)
Total number of queued commands = 0
Device queue depth = 0x10
Number of free request entries = 116
Number of mailbox timeouts = 0
Number of ISP aborts = 0
Number of loop resyncs = 3
Number of retries for empty slots = 0
Number of reqs in pending_q= 0, retry_q= 0, done_q= 0, scsi_retry_q= 0
Host adapter:loop state= <READY>, flags= 0x8a0813
Dpc flags = 0x0
MBX flags = 0x0
SRB Free Count = 4096
Port down retry = 008
SCSI Device Information:
scsi-qla0-adapter-node=200000e08b02894b;
scsi-qla0-adapter-port=210000e08b02894b;
scsi-qla0-target-0=2000005013d01808;
scsi-qla0-target-1=2000005013d016d3;
scsi-qla0-target-2=2000005013d0158d;
scsi-qla0-target-3=2000005013d0154b;
SCSI LUN Information:
(Id:Lun)
( 0: 0): Total reqs 7, Pending reqs 0, flags 0x0, 0:0:82,
test3:~# cat /proc/scsi/qla2200/2
QLogic PCI to Fibre Channel Host Adapter for ISP22xx/ISP23xx:
Firmware version: 2.02.03, Driver version 6.1b2
Entry address = f883a060
HBA: QLA2200 , Serial# B50405
Request Queue = 0x32d38000, Response Queue = 0x33060000
Request Queue count= 128, Response Queue count= 64
Total number of active commands = 0
Total number of interrupts = 10
Total number of IOCBs (used/max) = (0/600)
Total number of queued commands = 0
Device queue depth = 0x10
Number of free request entries = 117
Number of mailbox timeouts = 0
Number of ISP aborts = 0
Number of loop resyncs = 3
Number of retries for empty slots = 0
Number of reqs in pending_q= 0, retry_q= 0, done_q= 0, scsi_retry_q= 0
Host adapter:loop state= <READY>, flags= 0x8a0813
Dpc flags = 0x0
MBX flags = 0x0
SRB Free Count = 4096
Port down retry = 008
SCSI Device Information:
scsi-qla1-adapter-node=200000e08b02854b;
scsi-qla1-adapter-port=210000e08b02854b;
scsi-qla1-target-0=2000005013d01808;
scsi-qla1-target-1=2000005013d016d3;
scsi-qla1-target-2=2000005013d0158d;
scsi-qla1-target-3=2000005013d0154b;
SCSI LUN Information:
(Id:Lun)
( 2: 0): Total reqs 7, Pending reqs 0, flags 0x0, 1:0:86,
--
Thomas
next prev parent reply other threads:[~2002-07-12 0:45 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-07-11 23:08 Weird Qlogic 2200 FC HBA / CNSI G7324 problem Thomas Langås
[not found] ` <20020711164141.B8468@beaverton.ibm.com>
2002-07-12 0:45 ` Thomas Langås [this message]
2002-07-12 8:23 ` Thomas Langås
2002-07-12 9:18 ` Thomas Langås
2002-07-12 16:16 ` Mike Anderson
2002-07-12 23:13 ` Thomas Langås
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20020712024511.A15943@stud.ntnu.no \
--to=tlan@stud.ntnu.no \
--cc=andmike@us.ibm.com \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox