Re: 2.5.31 qlogic error "this should not happen"

rwhron
2002-08-27T21:36:00Z

> Can you show cat /proc/scsi/scsi of the machine
> (as well as the lspci etc)?

Luns 0-31 look like this:

Host: scsi3 Channel: 00 Id: 01 Lun: 00
Vendor: IBM Model: 3542 Rev: 0401
Type: Direct-Access ANSI SCSI revision: 03

Luns 32-127 look like this:

Host: scsi3 Channel: 00 Id: 01 Lun: 32
Vendor: m m m Model: m m m m m m Rev:
Type: Direct-Access ANSI SCSI revision: ffffffff

Luns 32-127 shouldn't be accessible from this machine.
I believe it's part of a SAN at OSDL.

All of cat /proc/scsi/scsi at:
http://home.earthlink.net/~rwhron/kernel/scsi.txt

Qlogic entries in lspci -vvv:

09:04.0 SCSI storage controller: QLogic Corp. QLA2200 (rev 05)
Subsystem: QLogic Corp.: Unknown device 0002
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (16000ns min), cache line size 08
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at 9000 [size=256]
Region 1: Memory at f6800000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [44] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

09:05.0 SCSI storage controller: QLogic Corp. QLA2200 (rev 05)
same as above except for:
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 9400 [size=256]
Region 1: Memory at f6801000 (32-bit, non-prefetchable) [size=4K]

All of lspci -vvv at:
http://home.earthlink.net/~rwhron/kernel/lspci.txt

> Does RAID-5 mean you have a storage array attached?

Yes, hardware raid5. It appears to the OS as /dev/sdc.

> It looks like the latest qlogic qla driver includes 2.5.x support
> http://download.qlogic.com/drivers/5639/qla2x00-v6.1b5-dist.tgz

Thanks. The new driver appears to have 2.5 bits similar to
Lincoln Dale's patch for v6.1b2.

--
Randy Hron