From mboxrd@z Thu Jan  1 00:00:00 1970
From: Aaron Baxter <abaxter@southernohio.net>
Subject: [PATCH] Initio 9100-U SCSI Driver. ini9100u.c ini9100u.h [KERNEL 2.5.50]
Date: Thu, 5 Dec 2002 14:34:29 -0500
Sender: linux-scsi-owner@vger.kernel.org
Message-ID: <200212051434.29508.abaxter@southernohio.net>
Mime-Version: 1.0
Content-Type: text/plain;
  charset="us-ascii"
Content-Transfer-Encoding: 8bit
Return-path: <linux-scsi-owner@vger.kernel.org>
List-Id: linux-scsi@vger.kernel.org
To: linux-scsi@vger.kernel.org

Upon receiving compile errors when using the Initio 9100-U drivers I was able 
to modify and apply 2 patches from the list as well as added a few extra 
lines.  This patch works great with my system, however I do get one odd 
compile warning during make install.  It is as follows:  No module initio 
found for kernel 2.5.50 This only occurs when the driver is built-in to the 
kernel.  I know it's occurring during the mke2fs command, but I was unable to 
decipher the code enough to find the problem.  If someone could look into 
this it would be great (or maybe someone already fixed it).  I would 
appreciate any feedback I could get as I would like to have this contributed 
to the kernel package (if needed).

Aaron Baxter

--- linux/drivers/scsi/ini9100u.h.org   2002-12-05 04:34:14.000000000 -0500
+++ linux/drivers/scsi/ini9100u.h       2002-12-05 04:34:42.000000000 -0500
@@ -80,17 +80,16 @@
 extern int i91u_release(struct Scsi_Host *);
 extern int i91u_command(Scsi_Cmnd *);
 extern int i91u_queue(Scsi_Cmnd *, void (*done) (Scsi_Cmnd *));
+#if 0
 extern int i91u_abort(Scsi_Cmnd *);
 extern int i91u_reset(Scsi_Cmnd *, unsigned int);
-extern int i91u_biosparam(struct scsi_device *, struct block_device *,
-               sector_t, int *);
+#endif
+static int i91u_eh_bus_reset(Scsi_Cmnd * SCpnt);
+extern int i91u_biosparam(struct scsi_device *, struct block_device *, 
sector_t, int *);
 
 #define i91u_REVID "Initio INI-9X00U/UW SCSI device driver; Revision: 1.03g"
 
 #define INI9100U       { \
-       next:           NULL,                                           \
-       module:         NULL,                                           \
-       proc_name:      "INI9100U", \
        proc_info:      NULL,                           \
        name:           i91u_REVID, \
        detect:         i91u_detect, \
@@ -101,10 +100,8 @@
        eh_strategy_handler: NULL, \
        eh_abort_handler: NULL, \
        eh_device_reset_handler: NULL, \
-       eh_bus_reset_handler: NULL, \
+       eh_bus_reset_handler: i91u_eh_bus_reset, \
        eh_host_reset_handler: NULL, \
-       abort:          i91u_abort, \
-       reset:          i91u_reset, \
        bios_param:     i91u_biosparam, \
        can_queue:      1, \
        this_id:        1, \


--- linux/drivers/scsi/ini9100u.c.old   2002-12-05 04:34:24.000000000 -0500
+++ linux/driver/scsi/ini9100u.c        2002-12-05 04:38:55.000000000 -0500
@@ -108,7 +108,7 @@
 
 #define CVT_LINUX_VERSION(V,P,S)        (V * 65536 + P * 256 + S)
 
-#error Please convert me to Documentation/DMA-mapping.txt
+// #error Please convert me to Documentation/DMA-mapping.txt
 
 #ifndef LINUX_VERSION_CODE
 #include <linux/version.h>
@@ -138,6 +138,8 @@
 #include <linux/slab.h>
 #include "ini9100u.h"
 
+#include <linux/interrupt.h>
+
 #ifdef DEBUG_i91u
 unsigned int i91u_debug = DEBUG_DEFAULT;
 #endif
@@ -490,7 +492,9 @@
        if (SCpnt->use_sg) {
                pSrbSG = (struct scatterlist *) SCpnt->request_buffer;
                if (SCpnt->use_sg == 1) {       /* If only one entry in the 
list *//*      treat 
it as regular I/O */
-                       pSCB->SCB_BufPtr = (U32) VIRT_TO_BUS(pSrbSG->address);
+                       pSCB->SCB_BufPtr = (U32) VIRT_TO_BUS(
+                                       (unsigned char 
*)page_address(pSrbSG->page) +
+                                       pSrbSG->offset);
                        TotalLen = pSrbSG->length;
                        pSCB->SCB_SGLen = 0;
                } else {        /* Assign SG physical address   */
@@ -499,7 +503,9 @@
                        for (i = 0, TotalLen = 0, pSG = &pSCB->SCB_SGList[0];   
/* 1.01g */
                             i < SCpnt->use_sg;
                             i++, pSG++, pSrbSG++) {
-                               pSG->SG_Ptr = (U32) 
VIRT_TO_BUS(pSrbSG->address);
+                               pSG->SG_Ptr = (U32) VIRT_TO_BUS(
+                                               (unsigned char 
*)page_address(pSrbSG->page) +
+                                               pSrbSG->offset);
                                TotalLen += pSG->SG_Len = pSrbSG->length;
                        }
                        pSCB->SCB_SGLen = i;
@@ -551,6 +557,7 @@
        return -1;
 }
 
+#if 0
 /*
  *  Abort a queued command
  *  (commands that are on the bus can't be aborted easily)
@@ -578,6 +585,16 @@
        else
                return tul_device_reset(pHCB, (ULONG) SCpnt, SCpnt->target, 
reset_flags);
 }
+#endif
+
+static int i91u_eh_bus_reset(Scsi_Cmnd * SCpnt)
+{
+       HCS *pHCB;
+
+       pHCB = (HCS *) SCpnt->host->base;
+       tul_reset_scsi_bus(pHCB);
+       return SUCCESS;
+}
 
 /*
  * Return the "logical geometry"