From mboxrd@z Thu Jan 1 00:00:00 1970 From: Shanker Balan Subject: Re: Seagate Cheetah: Firmware, Bugs, Compatibility? Date: Wed, 8 Jan 2003 13:45:13 +0530 Sender: linux-scsi-owner@vger.kernel.org Message-ID: <20030108081513.GA1217@exocore.com> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: List-Id: linux-scsi@vger.kernel.org To: Linux-SCSI Hello: Mikael Abrahamsson wrote, > If I have not had any of my problems in 2-3 weeks I'll email back it > as a success report. I am having problems flashing the drive. I get an "-2" error with sgdskfl. Error -2 is a "-2 means that the SCSI request returned a check condition (sense error)" from the UserGuide. I got a similar sense error while trying to flash using the Quantum supplied "DL_scsi.exe" under DOS. Andrew, any idea what might be the problem here? Also whats a "Servo image"? Here is paste from "sgdskfl" run: Log file /var/log/sgdskfl.log is open, debug=0 Num Name [bus:ch:id:lun] Type Vendor Device_Model FW__ Serial#_ Servo___ 0 /dev/sg0 [0:0:0:0] Disk QUANTUM ATLAS10K3_18_SCA 020W 34220894 1 /dev/sg1 [0:0:1:0] Disk QUANTUM ATLAS10K3_73_SCA 020W 34820965 2 /dev/sg2 [0:0:2:0] Disk QUANTUM ATLAS10K3_73_SCA 020W 34820635 Enter Selection ('d' to download, 'q' to quit) : d Device Num (0 to 2) : 2 Selected 2: [0:2] QUANTUM ATLAS10K3_73_SCA020W34820635 Reading image file atlas10k.lod, size = 377167 No servo image Device [2] is ready for download Starting download process for 1 disk. Downloading Firmware image to disk 2 Wed Jan 8 13:40:52 2003 Current sg_cmd_done_bh00:00: sense key Illegal Request write_buffer: Check Condition Driver_status=0x08 (DRIVER_SENSE,SUGGEST_OK) sense error, key=05 asc=26 ascq=80 Illegal RequestInfo valid=0, Current [2] Error -2 in writing buffer Press ENTER to continue -- Shanu http://shankerbalan.com/