From: Rolf Eike Beer <eike-kernel@sf-tec.de>
To: linux-scsi@vger.kernel.org
Cc: Richard Hirst <rhirst@linuxcare.com>
Subject: [PATCH 2.5.59] sim710: cleanup/remove most cli()'s
Date: Tue, 4 Feb 2003 11:23:06 +0100 [thread overview]
Message-ID: <200302041123.06204@bilbo.math.uni-mannheim.de> (raw)
Hi,
the appended patch does the following:
-group all includes (except '#include "scsi_module.c"') together
-add KERN_* to all printk's
-add error checking for call of request_region
-remove most cli() and use spin_lock instead
-move help text to Documentation/scsi/sim710.txt
-add a new debug target for debugging spinlocks
-remove the magic numbers for request_region and release_region and use
SIM710_IOREGION_SIZE instead
-same thing for the driver name
-remove assignement to driver_template.proc_name which is already done before
in sim710.h
I have not broken this into peaces because for all changes (except the first
of course) the corresponding lines are grouped together so it should be clear
what I've done.
A kernel with this modification has booted yesterday and was tested under
heavy loads succesfully.
What has to be done is:
-remove the remaining two cli()
-port this to the new driver model
I'm already working on this but it does not boot until now, so I'll delay this
until it works.
Eike
diff -Naur linux-2.5.59-vanilla/Documentation/scsi/sim710.txt linux-2.5.59-lacon/Documentation/scsi/sim710.txt
--- linux-2.5.59-vanilla/Documentation/scsi/sim710.txt Thu Jan 1 01:00:00 1970
+++ linux-2.5.59-lacon/Documentation/scsi/sim710.txt Tue Feb 4 08:50:59 2003
@@ -0,0 +1,90 @@
+Documentation for "sim710"
+
+1. Contributions
+2. General information
+3. Parameters
+4. Limitations
+
+
+1. Contributions
+
+ * MCA card detection code by Trent McNair.
+ * Fixes to not explicitly nul bss data from Xavier Bestel.
+ * Some multiboard fixes from Rolf Eike Beer.
+ * Auto probing of EISA config space from Trevor Hemsley.
+
+
+2. General information
+
+Various bits of code in this driver have been copied from 53c7,8xx,c,
+which is coyright Drew Eckhardt. The scripts for the SCSI chip are
+compiled with the script compiler written by Drew.
+
+This is a simple driver for the NCR53c710. More complex drivers
+for this chip (e.g. 53c7xx.c) require that the scsi chip be able to
+do DMA block moves between memory and on-chip registers, which can
+be a problem if those registers are in the I/O address space. There
+can also be problems on hardware where the registers are memory
+mapped, if the design is such that memory-to-memory transfers initiated
+by the scsi chip cannot access the chip registers.
+
+This driver is designed to avoid these problems and is intended to
+work with any Intel machines using 53c710 chips, including various
+Compaq and NCR machines. It was initially written for the Tadpole
+TP34V VME board which is 68030 based.
+
+
+3. Parameters
+
+The driver supports boot-time parameters similar to
+ sim710=addr:0x9000,irq:15
+and insmod parameters similar to
+ sim710="addr:0x9000 irq:15"
+
+Multiple controllers can also be set up by command line, provided the
+addr: parameter is specified first for each controller. e.g.
+ sim710="addr:0x9000 irq:15 addr:0x8000 irq:14"
+
+To seperate the different options, ' ', '+', and ',' can be used, except
+that ',' can not be used in module parameters. ' ' can be a pain, because
+it needs to be quoted, which causes problems with some installers.
+The command line above is completely equivalent to
+ sim710="addr:0x9000+irq:15+addr:0x8000+irq:14"
+
+The complete list of options are:
+
+ addr:0x9000 Specifies the base I/O port (or address) of the 53c710.
+ irq:15 Specifies the IRQ number used by the 53c710.
+ debug:0xffff Generates lots of debug output. These are the constants
+ used to specify which type of debugging you want:
+ 0x0000 Nothing
+ 0x0001 Detailed trace of chip halt funtion
+ 0x0002 All chip register read/writes
+ 0x0004 Sync/async negotiation
+ 0x0008 Phase mis-match handling
+ 0x0010 General interrupt trace
+ 0x0020 Selection timeouts
+ 0x0040 Resume addresses for the script
+ 0x0080 Commands and status returned
+ 0x0100 Fixup of scsi addresses
+ 0x0200 Disconnect/reselect handling
+ 0x0400 spin_lock/spin_unlock debugging
+ 0xffff Any and all debug options
+ ignore:0x0a Makes the driver ignore SCSI IDs 0 and 2. This ist just
+ the sum over ( 1 << SCSI ID )
+ nodisc:0x70 Prevents disconnects from IDs 6, 5 and 4.
+ noneg:0x10 Prevents SDTR negotiation on ID 4.
+ disabled:1 Completely disables the driver. When present, overrides
+ all other options.
+
+The driver will auto-probe chip addresses and IRQs now, so typically no
+parameters are needed. Auto-probing of addresses is disabled if any addr:
+parameters are specified. The only option you can use if you want auto-probing
+is debug.
+
+
+4. Limitations
+
+ * Async only
+ * Severely lacking in error recovery
+ * 'debug:' should be per host really.
diff -Naur linux-2.5.59-vanilla/drivers/scsi/Kconfig linux-2.5.59-lacon/drivers/scsi/Kconfig
--- linux-2.5.59-vanilla/drivers/scsi/Kconfig Fri Jan 17 03:22:42 2003
+++ linux-2.5.59-lacon/drivers/scsi/Kconfig Tue Feb 4 11:01:39 2003
@@ -1383,8 +1383,8 @@
avoid these problems and is intended to work with any Intel machines
using 53c710 chips, including various Compaq and NCR machines.
- Please read the comments at the top of the file
- <file:drivers/scsi/sim710.c> for more information.
+ Please read the file <file:Documentation/scsi/sim710.txt> for more
+ information.
If you want to compile this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
diff -Naur linux-2.5.59-vanilla/drivers/scsi/sim710.c linux-2.5.59-lacon/drivers/scsi/sim710.c
--- linux-2.5.59-vanilla/drivers/scsi/sim710.c Fri Jan 17 03:22:29 2003
+++ linux-2.5.59-lacon/drivers/scsi/sim710.c Mon Feb 3 20:22:19 2003
@@ -3,7 +3,7 @@
*
*----------------------------------------------------------------------------
* This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
+ * it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
@@ -17,66 +17,12 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*----------------------------------------------------------------------------
*
- * MCA card detection code by Trent McNair.
- * Fixes to not explicitly nul bss data from Xavier Bestel.
- * Some multiboard fixes from Rolf Eike Beer.
- * Auto probing of EISA config space from Trevor Hemsley.
- *
- * Various bits of code in this driver have been copied from 53c7,8xx,c,
- * which is coyright Drew Eckhardt. The scripts for the SCSI chip are
- * compiled with the script compiler written by Drew.
- *
- * This is a simple driver for the NCR53c710. More complex drivers
- * for this chip (e.g. 53c7xx.c) require that the scsi chip be able to
- * do DMA block moves between memory and on-chip registers, which can
- * be a problem if those registers are in the I/O address space. There
- * can also be problems on hardware where the registers are memory
- * mapped, if the design is such that memory-to-memory transfers initiated
- * by the scsi chip cannot access the chip registers.
- *
- * This driver is designed to avoid these problems and is intended to
- * work with any Intel machines using 53c710 chips, including various
- * Compaq and NCR machines. It was initially written for the Tadpole
- * TP34V VME board which is 68030 based.
- *
- * The driver supports boot-time parameters similar to
- * sim710=addr:0x9000,irq:15
- * and insmod parameters similar to
- * sim710="addr:0x9000 irq:15"
- *
- * Multiple controllers can also be set up by command line, provided the
- * addr: parameter is specified first for each controller. e.g.
- * sim710="addr:0x9000 irq:15 addr:0x8000 irq:14"
- *
- * To seperate the different options, ' ', '+', and ',' can be used, except
- * that ',' can not be used in module parameters. ' ' can be a pain, because
- * it needs to be quoted, which causes problems with some installers.
- * The command line above is completely equivalent to
- * sim710="addr:0x9000+irq:15+addr:0x8000+irq:14"
- *
- * The complete list of options are:
- *
- * addr:0x9000 Specifies the base I/O port (or address) of the 53C710.
- * irq:15 Specifies the IRQ number used by the 53c710.
- * debug:0xffff Generates lots of debug output.
- * ignore:0x0a Makes the driver ignore SCSI IDs 0 and 2.
- * nodisc:0x70 Prevents disconnects from IDs 6, 5 and 4.
- * noneg:0x10 Prevents SDTR negotiation on ID 4.
- * disabled:1 Completely disables the driver. When present, overrides
- * all other options.
- *
- * The driver will auto-probe chip addresses and IRQs now, so typically no
- * parameters are needed. Auto-probing of addresses is disabled if any addr:
- * parameters are specified.
- *
- * Current limitations:
- *
- * o Async only
- * o Severely lacking in error recovery
- * o 'debug:' should be per host really.
- *
+ * See Documentation/scsi/sim710.txt for more information.
*/
+#define DRV_NAME "sim710"
+#define DRV_DESCR "Simple NCR53c710"
+
#include <linux/config.h>
#include <linux/module.h>
@@ -99,6 +45,16 @@
#include <asm/byteorder.h>
#include <linux/blk.h>
+#include "scsi.h"
+#include "hosts.h"
+#include "sim710.h"
+
+#include <linux/stat.h>
+
+/* The SCSI Script!!! */
+
+#include "sim710_d.h"
+
/* All targets are I/O mapped at the moment */
#define IO_MAPPED
@@ -130,12 +86,6 @@
#endif
-#include "scsi.h"
-#include "hosts.h"
-#include "sim710.h"
-
-#include<linux/stat.h>
-
#define DEBUG
#undef DEBUG_LIMIT_INTS /* Define to 10 to hang driver after 10 ints */
@@ -152,6 +102,7 @@
#define DEB_CMND 0x0080 /* Commands and status returned */
#define DEB_FIXUP 0x0100 /* Fixup of scsi addresses */
#define DEB_DISC 0x0200 /* Disconnect/reselect handling */
+#define DEB_SLOCK 0x0400 /* spin_lock/spin_unlock debugging */
#define DEB_ANY 0xffff /* Any and all debug options */
@@ -167,7 +118,7 @@
*/
#define SCSI_DONE(cmd) { \
- DEB(DEB_CMND, printk("scsi%d: Complete %08x\n", \
+ DEB(DEB_CMND, printk(KERN_DEBUG "scsi%d: Complete %08x\n", \
host->host_no, cmd->result)); \
if (cmd->result) \
hostdata->negotiate |= (1 << cmd->target); \
@@ -178,6 +129,8 @@
#define offsetof(t, m) ((size_t) (&((t *)0)->m))
#endif
+#define SIM710_IOREGION_SIZE 0x40
+
#define STATE_INITIALISED 0
#define STATE_HALTED 1
#define STATE_IDLE 2
@@ -209,10 +162,6 @@
static unsigned int bases[MAXBOARDS]; /* Base addresses of chips */
static unsigned int irq_vectors[MAXBOARDS]; /* IRQ vectors used by chips */
-/* The SCSI Script!!! */
-
-#include "sim710_d.h"
-
/* Now define offsets in the DSA, as (A_dsa_xxx/4) */
#define DSA_SELECT (A_dsa_select/4)
@@ -287,12 +236,14 @@
struct sim710_hostdata *hostdata = (struct sim710_hostdata *)
host->hostdata[0];
- save_flags(flags);
- cli();
- printk("scsi%d: Chip register contents:\n", host->host_no);
- printk(" (script at virt %p, bus %lx)\n",
+ DEB(DEB_SLOCK, printk(KERN_DEBUG "ncr_dump: trying to get spinlock for board at 0x%x\n", host->unique_id));
+ spin_lock_irqsave(host->host_lock, flags);
+ DEB(DEB_SLOCK, printk(KERN_DEBUG "ncr_dump: got spinlock\n"));
+
+ printk(KERN_DEBUG "scsi%d: Chip register contents:\n", host->host_no);
+ printk(KERN_DEBUG " (script at virt %p, bus %lx)\n",
hostdata->script, virt_to_bus(hostdata->script));
- printk(" 00 sien: %02x sdid: %02x scntl1:%02x scntl0:%02x\n"
+ printk(KERN_DEBUG " 00 sien: %02x sdid: %02x scntl1:%02x scntl0:%02x\n"
" 04 socl: %02x sodl: %02x sxfer: %02x scid: %02x\n"
" 08 sbcl: %02x sbdl: %02x sidl: %02x sfbr: %02x\n"
" 0C sstat2:%02x sstat1:%02x sstat0:%02x dstat: %02x\n"
@@ -320,7 +271,8 @@
NCR_read8(DWT_REG), NCR_read8(DIEN_REG), NCR_read8(DMODE_REG),
NCR_read32(ADDER_REG));
- restore_flags(flags);
+ spin_unlock_irqrestore(host->host_lock, flags);
+ DEB(DEB_SLOCK, printk(KERN_DEBUG "ncr_dump: released spinlock\n"));
}
@@ -356,7 +308,7 @@
}
#endif
else if (no_of_boards == 0) {
- printk("sim710: Invalid parameters, addr: must come first\n");
+ printk(KERN_WARNING DRV_NAME ": Invalid parameters, addr: must come first\n");
no_of_boards = -1;
return 1;
}
@@ -368,12 +320,9 @@
opt_nodisc[no_of_boards-1] = val;
else if (!strncmp(cur, "noneg:", 6))
opt_noneg[no_of_boards-1] = val;
- else if (!strncmp(cur, "disabled:", 9)) {
- no_of_boards = -1;
- return 1;
- }
else {
- printk("sim710: unexpected boot option '%.*s'\n", (int)(pc-cur+1), cur);
+ if (strncmp(cur, "disabled:", 9))
+ printk(KERN_WARNING DRV_NAME ": unexpected boot option '%.*s'\n", (int)(pc-cur+1), cur);
no_of_boards = -1;
return 1;
}
@@ -442,8 +391,10 @@
int timeout;
int res = 0;
- save_flags(flags);
- cli();
+ DEB(DEB_SLOCK, printk(KERN_DEBUG "ncr_halt: trying to get spinlock for board at 0x%x\n", host->unique_id));
+ spin_lock_irqsave(host->host_lock, flags);
+ DEB(DEB_SLOCK, printk(KERN_DEBUG "ncr_halt: got spinlock\n"));
+
/* Stage 0 : eat all interrupts
Stage 1 : set ABORT
Stage 2 : eat all but abort interrupts
@@ -453,29 +404,29 @@
*/
for (stage = 0, timeout = 50000; timeout; timeout--) {
if (stage == 1) {
- DEB(DEB_HALT, printk("ncr_halt: writing ISTAT_ABRT\n"));
+ DEB(DEB_HALT, printk(KERN_DEBUG "ncr_halt: writing ISTAT_ABRT\n"));
NCR_write8(ISTAT_REG, ISTAT_ABRT);
++stage;
}
istat = NCR_read8 (ISTAT_REG);
if (istat & ISTAT_SIP) {
- DEB(DEB_HALT, printk("ncr_halt: got ISTAT_SIP, istat=%02x\n", istat));
+ DEB(DEB_HALT, printk(KERN_DEBUG "ncr_halt: got ISTAT_SIP, istat=%02x\n", istat));
tmp = NCR_read8(SSTAT0_REG);
- DEB(DEB_HALT, printk("ncr_halt: got SSTAT0_REG=%02x\n", tmp));
+ DEB(DEB_HALT, printk(KERN_DEBUG "ncr_halt: got SSTAT0_REG=%02x\n", tmp));
} else if (istat & ISTAT_DIP) {
- DEB(DEB_HALT, printk("ncr_halt: got ISTAT_DIP, istat=%02x\n", istat));
+ DEB(DEB_HALT, printk(KERN_DEBUG "ncr_halt: got ISTAT_DIP, istat=%02x\n", istat));
tmp = NCR_read8(DSTAT_REG);
- DEB(DEB_HALT, printk("ncr_halt: got DSTAT_REG=%02x\n", tmp));
+ DEB(DEB_HALT, printk(KERN_DEBUG "ncr_halt: got DSTAT_REG=%02x\n", tmp));
if (stage == 2) {
if (tmp & DSTAT_ABRT) {
- DEB(DEB_HALT, printk("ncr_halt: got DSTAT_ABRT, clearing istat\n"));
+ DEB(DEB_HALT, printk(KERN_DEBUG "ncr_halt: got DSTAT_ABRT, clearing istat\n"));
NCR_write8(ISTAT_REG, 0);
++stage;
} else {
res = 1;
break;
- }
- }
+ }
+ }
}
if (!(istat & (ISTAT_SIP|ISTAT_DIP))) {
if (stage == 0)
@@ -485,7 +436,8 @@
}
udelay(10);
}
- restore_flags(flags);
+ spin_unlock_irqrestore(host->host_lock, flags);
+ DEB(DEB_SLOCK, printk(KERN_DEBUG "ncr_halt: released spinlock\n"));
if (timeout == 0 || res) {
printk(KERN_ALERT "scsi%d: could not halt NCR chip\n", host->host_no);
@@ -514,8 +466,10 @@
{
unsigned long flags;
- save_flags(flags);
- cli();
+ DEB(DEB_SLOCK, printk(KERN_DEBUG "sim710_soft_reset: trying to get spinlock for board at 0x%x\n", host->unique_id));
+ spin_lock_irqsave(host->host_lock, flags);
+ DEB(DEB_SLOCK, printk(KERN_DEBUG "sim710_soft_reset: got spinlock\n"));
+
/*
* Do a soft reset of the chip so that everything is
* reinitialized to the power-on state.
@@ -557,7 +511,8 @@
NCR_write8(SIEN_REG_700,
SIEN_PAR | SIEN_700_STO | SIEN_RST | SIEN_UDC | SIEN_SGE | SIEN_MA);
- restore_flags(flags);
+ spin_unlock_irqrestore(host->host_lock, flags);
+ DEB(DEB_SLOCK, printk(KERN_DEBUG "sim710_soft_reset: released spinlock\n"));
}
@@ -581,9 +536,9 @@
memcpy (hostdata->script, SCRIPT, sizeof(SCRIPT));
for (i = 0; i < PATCHES; i++)
hostdata->script[LABELPATCHES[i]] += isa_virt_to_bus(hostdata->script);
- patch_abs_32 (hostdata->script, 0, reselected_identify,
+ patch_abs_32 (hostdata->script, 0, reselected_identify,
isa_virt_to_bus((void *)&(hostdata->reselected_identify)));
- patch_abs_32 (hostdata->script, 0, msgin_buf,
+ patch_abs_32 (hostdata->script, 0, msgin_buf,
isa_virt_to_bus((void *)&(hostdata->msgin_buf[0])));
patch_abs_32 (hostdata->script, 0, msg_reject,
isa_virt_to_bus((void *)&(hostdata->msg_reject)));
@@ -617,7 +572,7 @@
u32 resume_offset;
if (resa && hostdata->negotiate & (1 << cmd->target)) {
- DEB(DEB_SYNC, printk("scsi%d: Response to host SDTR = %02x %02x\n",
+ DEB(DEB_SYNC, printk(KERN_DEBUG "scsi%d: Response to host SDTR = %02x %02x\n",
host->host_no, hostdata->msgin_buf[3], hostdata->msgin_buf[4]));
/* We always issue an SDTR with the identify, so we must issue
* the CDB next.
@@ -626,7 +581,7 @@
hostdata->negotiate &= ~(1 << cmd->target);
}
else {
- DEB(DEB_SYNC, printk("scsi%d: Target initiated SDTR = %02x %02x\n",
+ DEB(DEB_SYNC, printk(KERN_DEBUG "scsi%d: Target initiated SDTR = %02x %02x\n",
host->host_no, hostdata->msgin_buf[3], hostdata->msgin_buf[4]));
memcpy(targdata->dsa_msgout, async_message, sizeof(async_message));
targdata->dsa[DSA_MSGOUT] = sizeof(async_message);
@@ -659,7 +614,7 @@
if (ddir) {
/* Receive */
- if (synchronous)
+ if (synchronous)
count += (NCR_read8 (SSTAT2_REG) & SSTAT2_FF_MASK) >> SSTAT2_FF_SHIFT;
else
if (NCR_read8 (SSTAT1_REG) & SSTAT1_ILF)
@@ -709,7 +664,7 @@
resume_offset = Ent_reselect;
break;
default:
- printk("scsi%d: Unexpected Illegal Instruction, script[%04x]\n",
+ printk(KERN_WARNING "scsi%d: Unexpected Illegal Instruction, script[%04x]\n",
host->host_no, index);
sim710_errors++;
/* resume_offset is zero, which will cause host reset */
@@ -733,7 +688,7 @@
sbcl = NCR_read8(SBCL_REG) & SBCL_PHASE_MASK;
index = (u32)((u32 *)(isa_bus_to_virt(NCR_read32(DSP_REG))) - hostdata->script);
- DEB(DEB_PMM, printk("scsi%d: Phase mismatch, phase %s (%x) at script[0x%x]\n",
+ DEB(DEB_PMM, printk(KERN_DEBUG "scsi%d: Phase mismatch, phase %s (%x) at script[0x%x]\n",
host->host_no, sbcl_to_phase(sbcl), sbcl, index));
DEB(DEB_PMM, print_command(cmd->cmnd));
@@ -749,18 +704,18 @@
* byte of an identify message, regardless of whether we
* have more bytes to send!
*/
- printk("scsi%d: Unexpected switch to CMDOUT during IDENTIFY\n",
+ printk(KERN_WARNING "scsi%d: Unexpected switch to CMDOUT during IDENTIFY\n",
host->host_no);
resume_offset = Ent_resume_cmd;
}
else if (sbcl == SBCL_PHASE_STATIN) {
/* Some devices do this on parity error, at least */
- printk("scsi%d: Unexpected switch to STATUSIN on initial message out\n",
+ printk(KERN_WARNING "scsi%d: Unexpected switch to STATUSIN on initial message out\n",
host->host_no);
resume_offset = Ent_end_data_trans;
}
else {
- printk("scsi%d: Unexpected phase change to %s on initial msgout\n",
+ printk(KERN_WARNING "scsi%d: Unexpected phase change to %s on initial msgout\n",
host->host_no, sbcl_to_phase(sbcl));
/* resume_offset is zero, which will cause a host reset */
}
@@ -779,14 +734,14 @@
oaddr = targdata->dsa[DSA_DATAIN + sg_id * 2 + 1];
residual = datapath_residual (host);
if (residual)
- printk("scsi%d: Residual count %d on DataIn - NOT expected!!!",
+ printk(KERN_WARNING "scsi%d: Residual count %d on DataIn - NOT expected!!!",
host->host_no, residual);
naddr = NCR_read32(DNAD_REG) - residual;
nlen = (NCR_read32(DBC_REG) & 0x00ffffff) + residual;
- DEB(DEB_PMM, printk("scsi%d: DIN sg %d, old %08x/%08x, new %08x/%08x (%d)\n",
+ DEB(DEB_PMM, printk(KERN_DEBUG "scsi%d: DIN sg %d, old %08x/%08x, new %08x/%08x (%d)\n",
host->host_no, sg_id, oaddr, olen, naddr, nlen, residual));
if (oaddr+olen != naddr+nlen) {
- printk("scsi%d: PMM DIN counts error: 0x%x + 0x%x != 0x%x + 0x%x",
+ printk(KERN_WARNING "scsi%d: PMM DIN counts error: 0x%x + 0x%x != 0x%x + 0x%x",
host->host_no, oaddr, olen, naddr, nlen);
}
else {
@@ -809,10 +764,10 @@
residual = datapath_residual (host);
naddr = NCR_read32(DNAD_REG) - residual;
nlen = (NCR_read32(DBC_REG) & 0x00ffffff) + residual;
- DEB(DEB_PMM, printk("scsi%d: DOUT sg %d, old %08x/%08x, new %08x/%08x (%d)\n",
+ DEB(DEB_PMM, printk(KERN_DEBUG "scsi%d: DOUT sg %d, old %08x/%08x, new %08x/%08x (%d)\n",
host->host_no, sg_id, oaddr, olen, naddr, nlen, residual));
if (oaddr+olen != naddr+nlen) {
- printk("scsi%d: PMM DOUT counts error: 0x%x + 0x%x != 0x%x + 0x%x",
+ printk(KERN_WARNING "scsi%d: PMM DOUT counts error: 0x%x + 0x%x != 0x%x + 0x%x",
host->host_no, oaddr, olen, naddr, nlen);
}
else {
@@ -825,12 +780,12 @@
/* Change to Status In at some random point; probably wants to report a
* parity error or similar.
*/
- printk("scsi%d: Unexpected phase change to STATUSIN at index 0x%x\n",
+ printk(KERN_WARNING "scsi%d: Unexpected phase change to STATUSIN at index 0x%x\n",
host->host_no, index);
resume_offset = Ent_end_data_trans;
}
else {
- printk("scsi%d: Unexpected phase change to %s at index 0x%x\n",
+ printk(KERN_WARNING "scsi%d: Unexpected phase change to %s at index 0x%x\n",
host->host_no, sbcl_to_phase(sbcl), index);
/* resume_offset is zero, which will cause a host reset */
}
@@ -893,7 +848,7 @@
break;
case A_int_data_bad_phase:
sbcl = NCR_read8(SBCL_REG) & SBCL_PHASE_MASK;
- printk("scsi%d: int_data_bad_phase, phase %s (%x)\n",
+ printk(KERN_WARNING "scsi%d: int_data_bad_phase, phase %s (%x)\n",
host->host_no, sbcl_to_phase(sbcl), sbcl);
break;
case A_int_bad_msg1:
@@ -912,7 +867,7 @@
case A_int_not_rej:
default:
sbcl = NCR_read8(SBCL_REG) & SBCL_PHASE_MASK;
- printk("scsi%d: Unimplemented script interrupt: %08x, phase %s\n",
+ printk(KERN_WARNING "scsi%d: Unimplemented script interrupt: %08x, phase %s\n",
host->host_no, dsps, sbcl_to_phase(sbcl));
sim710_errors++;
/* resume_offset is zero, which will cause a host reset */
@@ -929,9 +884,12 @@
struct Scsi_Host *host = dev_id;
unsigned long flags;
+ DEB(DEB_SLOCK, printk(KERN_DEBUG "do_sim710_intr_handle: trying to get spinlock for board at 0x%x\n", host->unique_id));
spin_lock_irqsave(host->host_lock, flags);
+ DEB(DEB_SLOCK, printk(KERN_DEBUG "do_sim710_intr_handle: got spinlock\n"));
sim710_intr_handle(irq, host, regs);
spin_unlock_irqrestore(host->host_lock, flags);
+ DEB(DEB_SLOCK, printk(KERN_DEBUG "do_sim710_intr_handle: released spinlock\n"));
}
@@ -964,15 +922,15 @@
* between accesses to sstat0 and dstat ??? */
dstat = NCR_read8(DSTAT_REG);
}
- DEB(DEB_INTS, printk("scsi%d: Int %d, istat %02x, sstat0 %02x "
+ DEB(DEB_INTS, printk(KERN_DEBUG "scsi%d: Int %d, istat %02x, sstat0 %02x "
"dstat %02x, dsp [%04x], scratch %02x\n",
host->host_no, sim710_intrs, istat, sstat0, dstat,
(u32 *)(isa_bus_to_virt(NCR_read32(DSP_REG))) - hostdata->script,
scratch));
if (scratch & 0x100) {
u8 *p = hostdata->msgin_buf;
-
- DEB(DEB_INTS, printk(" msgin_buf: %02x %02x %02x %02x\n",
+
+ DEB(DEB_INTS, printk(KERN_DEBUG " msgin_buf: %02x %02x %02x %02x\n",
p[0], p[1], p[2], p[3]));
}
if ((dstat & DSTAT_SIR) && dsps == A_int_reselected) {
@@ -985,7 +943,7 @@
int id = 0;
if (!(lcrc & 0x7f)) {
- printk("scsi%d: Reselected with LCRC = %02x\n",
+ printk(KERN_INFO "scsi%d: Reselected with LCRC = %02x\n",
host->host_no, lcrc);
cmd = NULL;
}
@@ -994,13 +952,13 @@
id++;
lcrc >>= 1;
}
- DEB(DEB_DISC, printk("scsi%d: Reselected by ID %d\n",
+ DEB(DEB_DISC, printk(KERN_DEBUG "scsi%d: Reselected by ID %d\n",
host->host_no, id));
if (hostdata->running) {
/* Clear SIGP */
(void)NCR_read8(CTEST2_REG_700);
- DEB(DEB_DISC, printk("scsi%d: Select of %d interrupted "
+ DEB(DEB_DISC, printk(KERN_DEBUG "scsi%d: Select of %d interrupted "
"by reselect from %d (%p)\n",
host->host_no, hostdata->running->target,
id, hostdata->target[id].cur_cmd));
@@ -1016,8 +974,8 @@
cmd = hostdata->running;
if (!cmd) {
- printk("scsi%d: No active command!\n", host->host_no);
- printk("scsi%d: Int %d, istat %02x, sstat0 %02x "
+ printk(KERN_INFO "scsi%d: No active command!\n", host->host_no);
+ printk(KERN_INFO "scsi%d: Int %d, istat %02x, sstat0 %02x "
"dstat %02x, dsp [%04x], scratch %02x, dsps %08x\n",
host->host_no, sim710_intrs, istat, sstat0, dstat,
(u32 *)(isa_bus_to_virt(NCR_read32(DSP_REG))) - hostdata->script,
@@ -1025,20 +983,20 @@
/* resume_offset is zero, which will cause a host reset */
}
else if (sstat0 & SSTAT0_700_STO) {
- DEB(DEB_TOUT, printk("scsi%d: Selection timeout\n", host->host_no));
+ DEB(DEB_TOUT, printk(KERN_DEBUG "scsi%d: Selection timeout\n", host->host_no));
cmd->result = DID_NO_CONNECT << 16;
SCSI_DONE(cmd);
hostdata->target[cmd->target].cur_cmd = NULL;
resume_offset = Ent_reselect;
}
else if (sstat0 & (SSTAT0_SGE|SSTAT0_UDC|SSTAT0_RST|SSTAT0_PAR)) {
- printk("scsi%d: Serious error, sstat0 = %02x\n", host->host_no,
+ printk(KERN_ERR "scsi%d: Serious error, sstat0 = %02x\n", host->host_no,
sstat0);
sim710_errors++;
/* resume_offset is zero, which will cause a host reset */
}
else if (dstat & (DSTAT_BF|DSTAT_ABRT|DSTAT_SSI|DSTAT_WTD)) {
- printk("scsi%d: Serious error, dstat = %02x\n", host->host_no,
+ printk(KERN_ERR "scsi%d: Serious error, dstat = %02x\n", host->host_no,
dstat);
sim710_errors++;
/* resume_offset is zero, which will cause a host reset */
@@ -1055,7 +1013,7 @@
}
else {
sim710_errors++;
- printk("scsi%d: Spurious interrupt!\n", host->host_no);
+ printk(KERN_WARNING "scsi%d: Spurious interrupt!\n", host->host_no);
/* resume_offset is zero, which will cause a host reset */
}
}
@@ -1067,7 +1025,7 @@
}
else
hostdata->state = STATE_BUSY;
- DEB(DEB_RESUME, printk("scsi%d: Resuming at script[0x%x]\n",
+ DEB(DEB_RESUME, printk(KERN_DEBUG "scsi%d: Resuming at script[0x%x]\n",
host->host_no, resume_offset/4));
#ifdef DEBUG_LIMIT_INTS
if (sim710_intrs < DEBUG_LIMIT_INTS)
@@ -1081,7 +1039,7 @@
run_process_issue_queue(hostdata);
}
else {
- printk("scsi%d: Failed to handle interrupt. Failing commands "
+ printk(KERN_ERR "scsi%d: Failed to handle interrupt. Failing commands "
"and resetting SCSI bus and chip\n", host->host_no);
mdelay(1000); /* Give chance to read screen!! */
full_reset(host);
@@ -1098,7 +1056,7 @@
int i, datain, dataout, sg_start;
u32 *dip, *dop, dsa;
- DEB(DEB_CMND, printk("scsi%d: id%d starting ", host->host_no,
+ DEB(DEB_CMND, printk(KERN_DEBUG "scsi%d: id%d starting ", host->host_no,
cmd->target));
DEB(DEB_CMND, print_command(cmd->cmnd));
@@ -1139,7 +1097,7 @@
targdata->dsa[DSA_MSGOUT] = 1;
}
else {
- DEB(DEB_SYNC, printk("scsi%d: Negotiating async transfers "
+ DEB(DEB_SYNC, printk(KERN_DEBUG "scsi%d: Negotiating async transfers "
"for ID %d\n",
host->host_no, cmd->target));
memcpy(targdata->dsa_msgout+1, async_message, sizeof(async_message));
@@ -1301,7 +1259,7 @@
return 0;
}
- DEB(DEB_CMND, printk("scsi%d: id%d queuing ", host->host_no,
+ DEB(DEB_CMND, printk(KERN_DEBUG "scsi%d: id%d queuing ", host->host_no,
cmd->target));
DEB(DEB_CMND, print_command(cmd->cmnd));
@@ -1310,11 +1268,12 @@
cmd->SCp.ptr = NULL;
cmd->SCp.buffer = NULL;
- save_flags(flags);
- cli();
+ DEB(DEB_SLOCK, printk(KERN_DEBUG "sim710_queuecommand: trying to get spinlock for board at 0x%x\n", host->unique_id));
+ spin_lock_irqsave(host->host_lock, flags);
+ DEB(DEB_SLOCK, printk(KERN_DEBUG "sim710_queuecommand: got spinlock\n"));
if (ignore_ids[hostdata->chip] & (1 << cmd->target)) {
- printk("scsi%d: ignoring target %d\n", host->host_no, cmd->target);
+ printk(KERN_INFO "scsi%d: ignoring target %d\n", host->host_no, cmd->target);
cmd->result = (DID_BAD_TARGET << 16);
done(cmd);
restore_flags (flags);
@@ -1339,7 +1298,8 @@
tmp = (Scsi_Cmnd *) tmp->SCp.ptr);
tmp->SCp.ptr = (unsigned char *) cmd;
}
- restore_flags (flags);
+ spin_unlock_irqrestore(host->host_lock, flags);
+ DEB(DEB_SLOCK, printk(KERN_DEBUG "sim710_queuecommand: released spinlock\n"));
run_process_issue_queue(hostdata);
return 0;
}
@@ -1371,7 +1331,7 @@
#endif
if (no_of_boards < 0) {
- printk("sim710: NCR53C710 driver disabled\n");
+ printk(KERN_INFO DRV_NAME ": NCR53C710 driver disabled\n");
return 0;
}
@@ -1436,7 +1396,7 @@
irq_vectors[no_of_boards] =
irq_01bb_by_pos[((pos[0] & 0xC0) >> 6)];
if (bases[no_of_boards] == 0x0000)
- printk("sim710: NCR53C710 Adapter ID 0x01bb is disabled.\n");
+ printk(KERN_INFO DRV_NAME ": NCR53C710 Adapter ID 0x01bb is disabled.\n");
else {
no_of_boards++;
if ( *id_to_check == 0x01bb )
@@ -1452,7 +1412,7 @@
irq_vectors[no_of_boards] =
irq_004f_by_pos[((pos[0] & 0x70) >> 4) - 4];
if (bases[no_of_boards] == 0x0000)
- printk("sim710: NCR53C710 Adapter ID 0x004f is disabled.\n");
+ printk(KERN_INFO DRV_NAME ": NCR53C710 Adapter ID 0x004f is disabled.\n");
else {
no_of_boards++;
mca_set_adapter_name(slot,
@@ -1470,8 +1430,8 @@
if (no_of_boards == 0) {
int io_addr;
/* reverse probe, so my on-board controller at 0x9000 is always scsi0 */
- for (io_addr = 0x9000; no_of_boards < MAXBOARDS && io_addr >= 0x1000; io_addr -= 0x1000) {
- if (request_region(io_addr, 0x40, "sim710") != NULL) {
+ for (io_addr = 0x9000; no_of_boards < MAXBOARDS && io_addr > 0x0000; io_addr -= 0x1000) {
+ if (request_region(io_addr, SIM710_IOREGION_SIZE, DRV_NAME) != NULL) {
int id0 = inw(io_addr + 0xc80);
int id1 = inw(io_addr + 0xc82);
/* The on-board controller on my Proliant 2000 is 0x1044,
@@ -1501,19 +1461,19 @@
irq_vectors[no_of_boards] = 9;
break;
default:
- printk("sim710.c: irq nasty\n");
+ printk(KERN_WARNING DRV_NAME ": irq nasty\n");
}
#endif
no_of_boards++;
}
- release_region(io_addr, 64);
+ release_region(io_addr, SIM710_IOREGION_SIZE);
}
}
}
#endif
-
+
if (!no_of_boards) {
- printk("sim710: No NCR53C710 adapter found.\n");
+ printk(KERN_INFO DRV_NAME ": No NCR53C710 adapter found.\n");
return 0;
}
@@ -1523,17 +1483,17 @@
hostdata_order++;
size = PAGE_SIZE << hostdata_order;
- DEB(DEB_ANY, printk("sim710: hostdata %d bytes, size %d, order %d\n",
+ DEB(DEB_ANY, printk(KERN_DEBUG DRV_NAME ": hostdata %d bytes, size %d, order %d\n",
sizeof(struct sim710_hostdata), size, hostdata_order));
- tpnt->proc_name = "sim710";
+ tpnt->proc_name = DRV_NAME;
memset(our_hosts, 0, sizeof(our_hosts));
for (indx = 0; indx < no_of_boards; indx++) {
unsigned long page = __get_free_pages(GFP_ATOMIC, hostdata_order);
if(page == 0UL)
{
- printk(KERN_WARNING "sim710: out of memory registering board %d.\n", indx);
+ printk(KERN_WARNING DRV_NAME ": out of memory registering board %d.\n", indx);
break;
}
host = scsi_register(tpnt, 4);
@@ -1548,9 +1508,9 @@
scsi_id = 7;
base_addr = bases[indx];
requested_irq = irq_vectors[indx];
- printk("scsi%d: Configuring Sim710 (SCSI-ID %d) at %x, IRQ %d\n",
+ printk(KERN_INFO "scsi%d: Configuring Sim710 (SCSI-ID %d) at 0x%x, IRQ %d\n",
host->host_no, scsi_id, base_addr, requested_irq);
- DEB(DEB_ANY, printk("sim710: hostdata = %p (%d bytes), dsa0 = %p\n",
+ DEB(DEB_ANY, printk(KERN_DEBUG DRV_NAME ": hostdata = %p (%d bytes), dsa0 = %p\n",
hostdata, sizeof(struct sim710_hostdata),
hostdata->target[0].dsa));
hostdata->chip = indx;
@@ -1563,18 +1523,24 @@
if (ncr_halt(host)) {
free_pages(host->hostdata[0], hostdata_order);
scsi_unregister (host);
- printk("scsi%d: Failed to initialise 53c710 at address %x\n",
+ printk(KERN_WARNING "scsi%d: Failed to initialise 53c710 at address 0x%x\n",
host->host_no, base_addr);
continue;
}
DEB(DEB_ANY,ncr_dump(host));
revision = (NCR_read8(CTEST8_REG) & 0xF0) >> 4;
- printk("scsi%d: Revision 0x%x\n",host->host_no,revision);
+ printk(KERN_INFO "scsi%d: Revision 0x%x\n",host->host_no,revision);
sim710_soft_reset(host);
sim710_driver_init(host);
- request_region((u32)host->base, 64, "sim710");
+ if ( ! request_region((u32)host->base, SIM710_IOREGION_SIZE, DRV_NAME) ) {
+ free_pages(host->hostdata[0], hostdata_order);
+ scsi_unregister (host);
+ printk(KERN_WARNING "scsi%d: Failed to request region for NCR53c710 at address 0x%x\n",
+ host->host_no, base_addr);
+ continue;
+ }
/* Now run test1 */
hostdata->test1_src = 0x53c710aa;
hostdata->test1_dst = 0x76543210;
@@ -1591,43 +1557,43 @@
probed_irq = probe_irq_off(irq_mask);
if (requested_irq == 0) {
if (probed_irq > 0) {
- printk("scsi%d: Chip is using IRQ %d\n", host->host_no,
+ printk(KERN_INFO "scsi%d: Chip is using IRQ %d\n", host->host_no,
probed_irq);
requested_irq = host->irq = probed_irq;
}
else {
- printk("scsi%d: Failed to probe for IRQ (returned %d)\n",
+ printk(KERN_WARNING "scsi%d: Failed to probe for IRQ (returned %d)\n",
host->host_no, probed_irq);
ncr_halt(host);
free_pages(host->hostdata[0], hostdata_order);
scsi_unregister (host);
- release_region((u32)host->base, 64);
+ release_region((u32)host->base, SIM710_IOREGION_SIZE);
continue;
}
}
else if (probed_irq > 0 && probed_irq != requested_irq)
- printk("scsi%d: WARNING requested IRQ %d, but probed as %d\n",
+ printk(KERN_WARNING "scsi%d: WARNING requested IRQ %d, but probed as %d\n",
host->host_no, requested_irq, probed_irq);
else if (probed_irq <= 0)
- printk("scsi%d: WARNING IRQ probe failed, (returned %d)\n",
+ printk(KERN_WARNING "scsi%d: WARNING IRQ probe failed, (returned %d)\n",
host->host_no, probed_irq);
-
+
dsps = NCR_read32(DSPS_REG);
if (hostdata->test1_dst != 0x53c710aa || dsps != A_int_test1) {
if (hostdata->test1_dst != 0x53c710aa)
- printk("scsi%d: test 1 FAILED: data: exp 0x53c710aa, got 0x%08x\n",
+ printk(KERN_WARNING "scsi%d: test 1 FAILED: data: exp 0x53c710aa, got 0x%08x\n",
host->host_no, hostdata->test1_dst);
if (dsps != A_int_test1)
- printk("scsi%d: test 1 FAILED: dsps: exp 0x%08x, got 0x%08x\n",
+ printk(KERN_WARNING "scsi%d: test 1 FAILED: dsps: exp 0x%08x, got 0x%08x\n",
host->host_no, A_int_test1, dsps);
ncr_dump(host);
ncr_halt(host);
free_pages(host->hostdata[0], hostdata_order);
scsi_unregister (host);
- release_region((u32)host->base, 64);
+ release_region((u32)host->base, SIM710_IOREGION_SIZE);
continue;
}
- printk("scsi%d: test 1 completed ok.\n", host->host_no);
+ printk(KERN_INFO "scsi%d: test 1 completed ok.\n", host->host_no);
NCR_write32(DSP_REG, virt_to_bus(hostdata->script+Ent_reselect/4));
hostdata->state = STATE_IDLE;
@@ -1641,7 +1607,7 @@
if (request_irq(host->irq, do_sim710_intr_handle,
SA_INTERRUPT | SA_SHIRQ, "sim710", host))
{
- printk("scsi%d : IRQ%d not free, detaching\n",
+ printk(KERN_WARNING "scsi%d : IRQ%d not free, detaching\n",
host->host_no, host->irq);
ncr_halt(host);
free_pages(host->hostdata[0], hostdata_order);
@@ -1658,7 +1624,7 @@
{
struct Scsi_Host * host = cmd->host;
- printk("scsi%d: Unable to abort command for target %d\n",
+ printk(KERN_ERR "scsi%d: Unable to abort command for target %d\n",
host->host_no, cmd->target);
return FAILED;
}
@@ -1672,7 +1638,7 @@
{
struct Scsi_Host * host = SCpnt->host;
- printk("scsi%d: Unable to send Bus Device Reset for target %d\n",
+ printk(KERN_ERR "scsi%d: Unable to send Bus Device Reset for target %d\n",
host->host_no, SCpnt->target);
return FAILED;
}
@@ -1686,7 +1652,7 @@
{
struct Scsi_Host * host = SCpnt->host;
- printk("scsi%d: Unable to do SCSI bus reset\n", host->host_no);
+ printk(KERN_ERR "scsi%d: Unable to do SCSI bus reset\n", host->host_no);
return FAILED;
}
@@ -1701,8 +1667,9 @@
u32 istat, dstat = 0, sstat0 = 0, sstat1 = 0, dsp, dsps, scratch;
unsigned long flags;
- save_flags(flags);
- cli();
+ DEB(DEB_SLOCK, printk(KERN_DEBUG "full_reset: trying to get spinlock for board at 0x%x\n", host->unique_id));
+ spin_lock_irqsave(host->host_lock, flags);
+ DEB(DEB_SLOCK, printk(KERN_DEBUG "full_reset: got spinlock\n"));
istat = NCR_read8(ISTAT_REG);
if (istat & ISTAT_SIP) {
@@ -1717,19 +1684,20 @@
restore_flags(flags);
return FAILED;
}
- restore_flags(flags);
+ spin_unlock_irqrestore(host->host_lock, flags);
+ DEB(DEB_SLOCK, printk(KERN_DEBUG "full_reset: released spinlock\n"));
dsp = NCR_read32(DSP_REG);
dsps = NCR_read32(DSPS_REG);
scratch = NCR_read32(SCRATCH_REG);
- printk("scsi%d: istat = %02x, sstat0 = %02x, sstat1 = %02x, dstat = %02x\n",
+ printk(KERN_INFO "scsi%d: istat = %02x, sstat0 = %02x, sstat1 = %02x, dstat = %02x\n",
host->host_no, istat, sstat0, sstat1, dstat);
- printk("scsi%d: dsp = %08x (script[0x%04x]), dsps = %08x, scratch = %08x\n",
+ printk(KERN_INFO "scsi%d: dsp = %08x (script[0x%04x]), dsps = %08x, scratch = %08x\n",
host->host_no, dsp,
((u32)bus_to_virt(dsp) - (u32)hostdata->script)/4, dsps, scratch);
for (target = 0; target < 7; target++) {
if ((cmd = hostdata->target[target].cur_cmd)) {
- printk("scsi%d: Failing command for ID%d\n",
+ printk(KERN_WARNING "scsi%d: Failing command for ID%d\n",
host->host_no, target);
cmd->result = DID_RESET << 16;
cmd->scsi_done(cmd);
@@ -1757,7 +1725,7 @@
{
struct Scsi_Host * host = SCpnt->host;
- printk("scsi%d: >>>>>>>>>>>> Host reset <<<<<<<<<<<<\n", host->host_no);
+ printk(KERN_INFO "scsi%d: >>>>>>>>>>>> Host reset <<<<<<<<<<<<\n", host->host_no);
return full_reset(host);
}
@@ -1770,7 +1738,7 @@
ncr_halt(host);
free_pages(host->hostdata[0], hostdata_order);
free_irq(host->irq, host);
- release_region((u32)host->base, 64);
+ release_region((u32)host->base, SIM710_IOREGION_SIZE);
return 1;
}
next reply other threads:[~2003-02-04 10:23 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-02-04 10:23 Rolf Eike Beer [this message]
2003-02-04 11:34 ` [PATCH 2.5.59] sim710: cleanup/remove most cli()'s Christoph Hellwig
2003-02-04 23:11 ` James Bottomley
2003-02-05 15:03 ` Rolf Eike Beer
2003-02-06 16:35 ` James Bottomley
2003-02-07 7:26 ` Rolf Eike Beer
2003-02-08 3:57 ` James Bottomley
2003-02-11 10:55 ` Rolf Eike Beer
2003-02-11 18:30 ` James Bottomley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200302041123.06204@bilbo.math.uni-mannheim.de \
--to=eike-kernel@sf-tec.de \
--cc=linux-scsi@vger.kernel.org \
--cc=rhirst@linuxcare.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox