public inbox for linux-scsi@vger.kernel.org
 help / color / mirror / Atom feed
From: William Lee Irwin III <wli@holomorphy.com>
To: "Justin T. Gibbs" <gibbs@scsiguy.com>
Cc: linux-scsi@vger.kernel.org
Subject: Re: 2.5.56-mm1 fails to detect cd burner
Date: Tue, 18 Mar 2003 13:13:57 -0800	[thread overview]
Message-ID: <20030318211357.GA1232@holomorphy.com> (raw)
In-Reply-To: <3196100000.1047914843@aslan.scsiguy.com>

On Mon, Mar 10, 2003 at 10:36:27PM -0800, William Lee Irwin III wrote:
>> jejb referred me to you (gibbs) for this after guiding me through a
>> cable check.

On Mon, Mar 17, 2003 at 08:27:23AM -0700, Justin T. Gibbs wrote:
> Can you try the latest driver 6.2.30, from here:
> http://people.FreeBSD.org/~gibbs/linux/SRC/
> Just untar the 2.5.X tarball into your source tree and recompile.
> If you still are having problems with the driver at that point, I'll
> guide you through other steps to enable debugging and get additional
> information.

Okay, I've got 2.5.65-mm1 up and it's detected. It needs some runtime
testing I'll have to do in 12-36 hours, probably with virgin 2.5.65
plus your driver.

Thanks.

scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.28
        <Adaptec 3960D Ultra160 SCSI adapter>
        aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs

anticipatory scheduling elevator
(scsi0:A:0): 40.000MB/s transfers (20.000MHz, offset 31, 16bit)
  Vendor: WDIGTL    Model: WDE18310 ULTRA2   Rev: 1.30
  Type:   Direct-Access                      ANSI SCSI revision: 02
scsi0:A:0:0: Tagged Queuing enabled.  Depth 253
anticipatory scheduling elevator
(scsi0:A:3): 20.000MB/s transfers (20.000MHz, offset 15)
  Vendor: YAMAHA    Model: CRW8424S          Rev: 1.0j
  Type:   CD-ROM                             ANSI SCSI revision: 02
anticipatory scheduling elevator
scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.28
        <Adaptec 3960D Ultra160 SCSI adapter>
        aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs

anticipatory scheduling elevator
(scsi1:A:6): 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit)
  Vendor: IBM       Model: DDYS-T36950N      Rev: S93E
  Type:   Direct-Access                      ANSI SCSI revision: 03
scsi1:A:6:0: Tagged Queuing enabled.  Depth 253
anticipatory scheduling elevator
st: Version 20021214, fixed bufsize 32768, wrt 30720, s/g segs 256
SCSI device sda: 35761710 512-byte hdwr sectors (18310 MB)
SCSI device sda: drive cache: write back
 sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sdb: 71687340 512-byte hdwr sectors (36704 MB)
SCSI device sdb: drive cache: write through
 sdb: unknown partition table
Attached scsi disk sdb at scsi1, channel 0, id 6, lun 0
sr0: scsi3-mmc drive: 24x/16x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 3, lun 0

-- wli

  reply	other threads:[~2003-03-18 21:13 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2003-03-11  6:36 2.5.56-mm1 fails to detect cd burner William Lee Irwin III
2003-03-11 16:03 ` William Lee Irwin III
2003-03-17 15:27   ` Justin T. Gibbs
2003-03-18 21:13     ` William Lee Irwin III [this message]
2003-03-29 13:49       ` William Lee Irwin III
2003-03-30 21:24         ` William Lee Irwin III
2003-03-30 22:26           ` Justin T. Gibbs
2003-03-31  5:29             ` William Lee Irwin III
2003-03-31  5:50               ` Douglas Gilbert
2003-03-31  6:03                 ` William Lee Irwin III

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20030318211357.GA1232@holomorphy.com \
    --to=wli@holomorphy.com \
    --cc=gibbs@scsiguy.com \
    --cc=linux-scsi@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox