public inbox for linux-scsi@vger.kernel.org
 help / color / mirror / Atom feed
From: Patrick Mansfield <patmans@us.ibm.com>
To: linux-scsi@vger.kernel.org
Subject: [PATCH] 1/7 starved changes - use a list_head for starved queue's
Date: Mon, 24 Mar 2003 17:54:22 -0800	[thread overview]
Message-ID: <20030324175422.A14996@beaverton.ibm.com> (raw)
In-Reply-To: <20030324175337.A14957@beaverton.ibm.com>; from patmans@us.ibm.com on Mon, Mar 24, 2003 at 05:53:37PM -0800

Use a list_head per scsi_host to store a list of scsi request queues
that were "starved" (they were not able to send IO because of per host
limitations).

diff -purN -X /home/patman/dontdiff 25-bk-base/drivers/scsi/hosts.c starve-25/drivers/scsi/hosts.c
--- 25-bk-base/drivers/scsi/hosts.c	Thu Mar  6 12:34:47 2003
+++ starve-25/drivers/scsi/hosts.c	Mon Mar 24 12:14:28 2003
@@ -383,6 +383,7 @@ struct Scsi_Host * scsi_register(Scsi_Ho
 	scsi_assign_lock(shost, &shost->default_lock);
 	INIT_LIST_HEAD(&shost->my_devices);
 	INIT_LIST_HEAD(&shost->eh_cmd_q);
+	INIT_LIST_HEAD(&shost->starved_list);
 
 	init_waitqueue_head(&shost->host_wait);
 	shost->dma_channel = 0xff;
diff -purN -X /home/patman/dontdiff 25-bk-base/drivers/scsi/hosts.h starve-25/drivers/scsi/hosts.h
--- 25-bk-base/drivers/scsi/hosts.h	Tue Mar 18 12:53:33 2003
+++ starve-25/drivers/scsi/hosts.h	Mon Mar 24 12:14:28 2003
@@ -380,6 +380,7 @@ struct Scsi_Host
     struct scsi_host_cmd_pool *cmd_pool;
     spinlock_t            free_list_lock;
     struct list_head      free_list;   /* backup store of cmd structs */
+    struct list_head      starved_list;
 
     spinlock_t		  default_lock;
     spinlock_t		  *host_lock;
@@ -471,12 +472,6 @@ struct Scsi_Host
     unsigned reverse_ordering:1;
 
     /*
-     * Indicates that one or more devices on this host were starved, and
-     * when the device becomes less busy that we need to feed them.
-     */
-    unsigned some_device_starved:1;
-   
-    /*
      * Host has rejected a command because it was busy.
      */
     unsigned int host_blocked;
diff -purN -X /home/patman/dontdiff 25-bk-base/drivers/scsi/scsi.h starve-25/drivers/scsi/scsi.h
--- 25-bk-base/drivers/scsi/scsi.h	Mon Mar 24 11:57:13 2003
+++ starve-25/drivers/scsi/scsi.h	Mon Mar 24 12:14:28 2003
@@ -555,6 +555,7 @@ struct scsi_device {
 	volatile unsigned short device_busy;	/* commands actually active on low-level */
 	spinlock_t list_lock;
 	struct list_head cmd_list;	/* queue of in use SCSI Command structures */
+	struct list_head starved_entry;
         Scsi_Cmnd *current_cmnd;	/* currently active command */
 	unsigned short queue_depth;	/* How deep of a queue we want */
 	unsigned short last_queue_full_depth; /* These two are used by */
@@ -615,8 +616,6 @@ struct scsi_device {
 					 * because we did a bus reset. */
 	unsigned ten:1;		/* support ten byte read / write */
 	unsigned remap:1;	/* support remapping  */
-	unsigned starved:1;	/* unable to process commands because
-				   host busy */
 //	unsigned sync:1;	/* Sync transfer state, managed by host */
 //	unsigned wide:1;	/* WIDE transfer state, managed by host */
 
diff -purN -X /home/patman/dontdiff 25-bk-base/drivers/scsi/scsi_lib.c starve-25/drivers/scsi/scsi_lib.c
--- 25-bk-base/drivers/scsi/scsi_lib.c	Tue Mar 18 12:53:33 2003
+++ starve-25/drivers/scsi/scsi_lib.c	Mon Mar 24 12:14:28 2003
@@ -356,7 +356,6 @@ static void scsi_queue_next_request(requ
 	struct scsi_device *sdev, *sdev2;
 	struct Scsi_Host *shost;
 	unsigned long flags;
-	int all_clear;
 
 	ASSERT_LOCK(q->queue_lock, 0);
 
@@ -383,11 +382,6 @@ static void scsi_queue_next_request(requ
 		__elv_add_request(q, cmd->request, 0, 0);
 	}
 
-	/*
-	 * Just hit the requeue function for the queue.
-	 */
-	__blk_run_queue(q);
-
 	sdev = q->queuedata;
 	shost = sdev->host;
 
@@ -412,31 +406,24 @@ static void scsi_queue_next_request(requ
 		}
 	}
 
-	/*
-	 * Now see whether there are other devices on the bus which
-	 * might be starved.  If so, hit the request function.  If we
-	 * don't find any, then it is safe to reset the flag.  If we
-	 * find any device that it is starved, it isn't safe to reset the
-	 * flag as the queue function releases the lock and thus some
-	 * other device might have become starved along the way.
-	 */
-	all_clear = 1;
-	if (shost->some_device_starved) {
-		list_for_each_entry(sdev, &shost->my_devices, siblings) {
-			if (shost->can_queue > 0 &&
-			    shost->host_busy >= shost->can_queue)
-				break;
-			if (shost->host_blocked || shost->host_self_blocked)
-				break;
-			if (sdev->device_blocked || !sdev->starved)
-				continue;
-			__blk_run_queue(sdev->request_queue);
-			all_clear = 0;
-		}
-
-		if (sdev == NULL && all_clear)
-			shost->some_device_starved = 0;
+	while (!list_empty(&shost->starved_list) &&
+	       !shost->host_blocked && !shost->host_self_blocked &&
+		!((shost->can_queue > 0) &&
+		  (shost->host_busy >= shost->can_queue))) {
+		/*
+		 * As long as shost is accepting commands and we have
+		 * starved queues, call __blk_run_queue. scsi_request_fn
+		 * drops the queue_lock and can add us back to the
+		 * starved_list.
+		 */
+		sdev2 = list_entry(shost->starved_list.next,
+					  struct scsi_device, starved_entry);
+		list_del_init(&sdev2->starved_entry);
+		__blk_run_queue(sdev2->request_queue);
 	}
+
+	__blk_run_queue(q);
+
 	spin_unlock_irqrestore(q->queue_lock, flags);
 }
 
@@ -1115,23 +1102,16 @@ static void scsi_request_fn(request_queu
 		 */
 		if (sdev->device_blocked)
 			break;
+
+		if (!list_empty(&sdev->starved_entry))
+			break;
+
 		if ((shost->can_queue > 0 && shost->host_busy >= shost->can_queue) ||
 		    shost->host_blocked || shost->host_self_blocked) {
-			/*
-			 * If we are unable to process any commands at all for
-			 * this device, then we consider it to be starved.
-			 * What this means is that there are no outstanding
-			 * commands for this device and hence we need a
-			 * little help getting it started again
-			 * once the host isn't quite so busy.
-			 */
-			if (sdev->device_busy == 0) {
-				sdev->starved = 1;
-				shost->some_device_starved = 1;
-			}
+			list_add_tail(&sdev->starved_entry,
+				      &shost->starved_list);
 			break;
-		} else
-			sdev->starved = 0;
+		}
 
 		/*
 		 * If we couldn't find a request that could be queued, then we
diff -purN -X /home/patman/dontdiff 25-bk-base/drivers/scsi/scsi_scan.c starve-25/drivers/scsi/scsi_scan.c
--- 25-bk-base/drivers/scsi/scsi_scan.c	Mon Mar 24 11:57:13 2003
+++ starve-25/drivers/scsi/scsi_scan.c	Mon Mar 24 12:14:28 2003
@@ -400,6 +400,7 @@ static struct scsi_device *scsi_alloc_sd
 	INIT_LIST_HEAD(&sdev->siblings);
 	INIT_LIST_HEAD(&sdev->same_target_siblings);
 	INIT_LIST_HEAD(&sdev->cmd_list);
+	INIT_LIST_HEAD(&sdev->starved_entry);
 	spin_lock_init(&sdev->list_lock);
 
 	/*

  reply	other threads:[~2003-03-25  1:57 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2003-03-25  1:53 [PATCH] 0/7 per scsi_device queue lock patches Patrick Mansfield
2003-03-25  1:54 ` Patrick Mansfield [this message]
2003-03-25  2:02   ` [PATCH] 2/7 add missing scsi_queue_next_request calls Patrick Mansfield
2003-03-25  2:02     ` [PATCH] 3/7 consolidate single_lun code Patrick Mansfield
2003-03-25  2:03       ` [PATCH] 4/7 cleanup/consolidate code in scsi_request_fn Patrick Mansfield
2003-03-25  2:03         ` [PATCH] 5/7 alloc a request_queue on each scsi_alloc_sdev call Patrick Mansfield
2003-03-25  2:03           ` [PATCH] 6/7 add and use a per-scsi_device queue_lock Patrick Mansfield
2003-03-25  2:04             ` [PATCH] 7/7 fix single_lun code for " Patrick Mansfield
2003-03-25 21:23               ` Luben Tuikov
2003-03-26 21:47                 ` Patrick Mansfield
2003-03-26 22:12                   ` Luben Tuikov
2003-03-25 21:03             ` [PATCH] 6/7 add and use a " Luben Tuikov
2003-03-26 21:33               ` Patrick Mansfield
2003-03-25 21:20             ` James Bottomley
2003-03-26  2:01               ` Patrick Mansfield
2003-03-27 16:09                 ` James Bottomley
2003-03-28  0:30                   ` Patrick Mansfield
2003-03-25  7:12           ` [PATCH] 5/7 alloc a request_queue on each scsi_alloc_sdev call Christoph Hellwig
2003-03-25  7:18             ` Jens Axboe
2003-03-25 21:32         ` [PATCH] 4/7 cleanup/consolidate code in scsi_request_fn Luben Tuikov
2003-03-26  0:58           ` Patrick Mansfield
2003-03-26 17:07             ` Luben Tuikov
2003-03-26 17:13               ` Patrick Mansfield
2003-03-26 17:25                 ` Luben Tuikov
2003-03-25 20:36       ` [PATCH] 3/7 consolidate single_lun code Luben Tuikov
2003-03-26 19:11         ` Patrick Mansfield
2003-03-26 22:05           ` Luben Tuikov
2003-03-27 22:43             ` Patrick Mansfield
2003-03-28 15:09               ` Luben Tuikov
2003-03-28 20:06                 ` Patrick Mansfield
2003-03-25 20:50       ` Luben Tuikov
2003-03-25 19:41     ` [PATCH] 2/7 add missing scsi_queue_next_request calls Luben Tuikov
2003-03-25 19:39   ` [PATCH] 1/7 starved changes - use a list_head for starved queue's Luben Tuikov
2003-03-27 16:14 ` [PATCH] 0/7 per scsi_device queue lock patches James Bottomley

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20030324175422.A14996@beaverton.ibm.com \
    --to=patmans@us.ibm.com \
    --cc=linux-scsi@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox