2.5.56-mm1 fails to detect cd burner

2.5.56-mm1 fails to detect cd burner

[William Lee Irwin III]

 scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA
 DRIVER, Rev 6.2.26
         <Adaptec 3960D Ultra160 SCSI adapter>
         aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
 
 (scsi0:A:0:0): Completed command without status.
 (scsi0:A:0:0): Protocol violation in Message-in phase.  Attempting to abort.
 (scsi0:A:0:0): Abort Message Sent
 (scsi0:A:0:0): SCB 3 - Abort Completed.
 scsi0:A:0:0: DV failed to configure device. Please file a bug report against this driver.

It's had other problems burning CD's in 2.5.x



-- wli

Re: 2.5.56-mm1 fails to detect cd burner

[William Lee Irwin III]

On Mon, Mar 10, 2003 at 10:36:27PM -0800, William Lee Irwin III wrote:
>  scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA
>  DRIVER, Rev 6.2.26
>          <Adaptec 3960D Ultra160 SCSI adapter>
>          aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
>  
>  (scsi0:A:0:0): Completed command without status.
>  (scsi0:A:0:0): Protocol violation in Message-in phase.  Attempting to abort.
>  (scsi0:A:0:0): Abort Message Sent
>  (scsi0:A:0:0): SCB 3 - Abort Completed.
>  scsi0:A:0:0: DV failed to configure device. Please file a bug report against this driver.
> 
> It's had other problems burning CD's in 2.5.x

jejb referred me to you (gibbs) for this after guiding me through a
cable check.


-- wli

Re: 2.5.56-mm1 fails to detect cd burner

[Justin T. Gibbs]

> On Mon, Mar 10, 2003 at 10:36:27PM -0800, William Lee Irwin III wrote:
>>  scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA
>>  DRIVER, Rev 6.2.26
>>          <Adaptec 3960D Ultra160 SCSI adapter>
>>          aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
>>  
>>  (scsi0:A:0:0): Completed command without status.
>>  (scsi0:A:0:0): Protocol violation in Message-in phase.  Attempting to abort.
>>  (scsi0:A:0:0): Abort Message Sent
>>  (scsi0:A:0:0): SCB 3 - Abort Completed.
>>  scsi0:A:0:0: DV failed to configure device. Please file a bug report against this driver.
>> 
>> It's had other problems burning CD's in 2.5.x
> 
> jejb referred me to you (gibbs) for this after guiding me through a
> cable check.

Can you try the latest driver 6.2.30, from here:

http://people.FreeBSD.org/~gibbs/linux/SRC/

Just untar the 2.5.X tarball into your source tree and recompile.
If you still are having problems with the driver at that point, I'll
guide you through other steps to enable debugging and get additional
information.

--
Justin

Re: 2.5.56-mm1 fails to detect cd burner

[William Lee Irwin III]

On Mon, Mar 10, 2003 at 10:36:27PM -0800, William Lee Irwin III wrote:
>> jejb referred me to you (gibbs) for this after guiding me through a
>> cable check.

On Mon, Mar 17, 2003 at 08:27:23AM -0700, Justin T. Gibbs wrote:
> Can you try the latest driver 6.2.30, from here:
> http://people.FreeBSD.org/~gibbs/linux/SRC/
> Just untar the 2.5.X tarball into your source tree and recompile.
> If you still are having problems with the driver at that point, I'll
> guide you through other steps to enable debugging and get additional
> information.

Okay, I've got 2.5.65-mm1 up and it's detected. It needs some runtime
testing I'll have to do in 12-36 hours, probably with virgin 2.5.65
plus your driver.

Thanks.

scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.28
        <Adaptec 3960D Ultra160 SCSI adapter>
        aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs

anticipatory scheduling elevator
(scsi0:A:0): 40.000MB/s transfers (20.000MHz, offset 31, 16bit)
  Vendor: WDIGTL    Model: WDE18310 ULTRA2   Rev: 1.30
  Type:   Direct-Access                      ANSI SCSI revision: 02
scsi0:A:0:0: Tagged Queuing enabled.  Depth 253
anticipatory scheduling elevator
(scsi0:A:3): 20.000MB/s transfers (20.000MHz, offset 15)
  Vendor: YAMAHA    Model: CRW8424S          Rev: 1.0j
  Type:   CD-ROM                             ANSI SCSI revision: 02
anticipatory scheduling elevator
scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.28
        <Adaptec 3960D Ultra160 SCSI adapter>
        aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs

anticipatory scheduling elevator
(scsi1:A:6): 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit)
  Vendor: IBM       Model: DDYS-T36950N      Rev: S93E
  Type:   Direct-Access                      ANSI SCSI revision: 03
scsi1:A:6:0: Tagged Queuing enabled.  Depth 253
anticipatory scheduling elevator
st: Version 20021214, fixed bufsize 32768, wrt 30720, s/g segs 256
SCSI device sda: 35761710 512-byte hdwr sectors (18310 MB)
SCSI device sda: drive cache: write back
 sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sdb: 71687340 512-byte hdwr sectors (36704 MB)
SCSI device sdb: drive cache: write through
 sdb: unknown partition table
Attached scsi disk sdb at scsi1, channel 0, id 6, lun 0
sr0: scsi3-mmc drive: 24x/16x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 3, lun 0

-- wli

Re: 2.5.56-mm1 fails to detect cd burner

[William Lee Irwin III]

On Tue, Mar 18, 2003 at 01:13:57PM -0800, William Lee Irwin III wrote:
> Okay, I've got 2.5.65-mm1 up and it's detected. It needs some runtime
> testing I'll have to do in 12-36 hours, probably with virgin 2.5.65
> plus your driver.

Sorry about this, various external pressures are causing delays. Next
12-24 hours _for real_.


-- wli

Re: 2.5.56-mm1 fails to detect cd burner

[William Lee Irwin III]

On Tue, Mar 18, 2003 at 01:13:57PM -0800, William Lee Irwin III wrote:
>> Okay, I've got 2.5.65-mm1 up and it's detected. It needs some runtime
>> testing I'll have to do in 12-36 hours, probably with virgin 2.5.65
>> plus your driver.

On Sat, Mar 29, 2003 at 05:49:51AM -0800, William Lee Irwin III wrote:
> Sorry about this, various external pressures are causing delays. Next
> 12-24 hours _for real_.

Okay, it's still burning coasters as of 2.5.65-mm1


-- wli

Re: 2.5.56-mm1 fails to detect cd burner

[Justin T. Gibbs]

> On Sat, Mar 29, 2003 at 05:49:51AM -0800, William Lee Irwin III wrote:
>> Sorry about this, various external pressures are causing delays. Next
>> 12-24 hours _for real_.
>
> Okay, it's still burning coasters as of 2.5.65-mm1

This is not an informative bug report.  Can you share any other details?
Are any errors reported?

--
Justin

Re: 2.5.56-mm1 fails to detect cd burner

[William Lee Irwin III]

On Sat, Mar 29, 2003 at 05:49:51AM -0800, William Lee Irwin III wrote:
>> Okay, it's still burning coasters as of 2.5.65-mm1

On Sun, Mar 30, 2003 at 10:26:04PM +0000, Justin T. Gibbs wrote:
> This is not an informative bug report.  Can you share any other details?
> Are any errors reported?

There are no ostensible errors. I logged the whole cdrecord session
(and used axboe's "special" cdrecord version) and have that, but
there's nothing obviously going wrong anywhere in it.


-- wli

Re: 2.5.56-mm1 fails to detect cd burner

[Douglas Gilbert]

William Lee Irwin III wrote:
> On Sat, Mar 29, 2003 at 05:49:51AM -0800, William Lee Irwin III wrote:
> 
>>>Okay, it's still burning coasters as of 2.5.65-mm1
>>
> 
> On Sun, Mar 30, 2003 at 10:26:04PM +0000, Justin T. Gibbs wrote:
> 
>>This is not an informative bug report.  Can you share any other details?
>>Are any errors reported?
> 
> 
> There are no ostensible errors. I logged the whole cdrecord session
> (and used axboe's "special" cdrecord version) and have that, but
> there's nothing obviously going wrong anywhere in it.

William,
Perhaps you could try an older version of cdrecord
that uses the sg interface. That way we may be able to
isolate the problem (and you may even get a useful
CD-R burnt).

Does that "special" version of cdrecord interface to the
kernel via the CDROM_PACKET or the SG_IO ioctl?

When I connected my Yamaha 4416S burner to an Adaptec
19160 on the 2.5.65 kernel it locked up in the scan
as you reported. My Tekram 390U3W with the sym53c8xx_2
driver didn't have this problem. I haven't had the need
to burn a CD-R recently. I have downloaded Justin's
latest aic7xxx driver but haven't loaded it yet.

Doug Gilbert

Re: 2.5.56-mm1 fails to detect cd burner

[William Lee Irwin III]

William Lee Irwin III wrote:
>> There are no ostensible errors. I logged the whole cdrecord session
>> (and used axboe's "special" cdrecord version) and have that, but
>> there's nothing obviously going wrong anywhere in it.

On Mon, Mar 31, 2003 at 03:50:54PM +1000, Douglas Gilbert wrote:
> William,
> Perhaps you could try an older version of cdrecord
> that uses the sg interface. That way we may be able to
> isolate the problem (and you may even get a useful
> CD-R burnt).
> Does that "special" version of cdrecord interface to the
> kernel via the CDROM_PACKET or the SG_IO ioctl?
> When I connected my Yamaha 4416S burner to an Adaptec
> 19160 on the 2.5.65 kernel it locked up in the scan
> as you reported. My Tekram 390U3W with the sym53c8xx_2
> driver didn't have this problem. I haven't had the need
> to burn a CD-R recently. I have downloaded Justin's
> latest aic7xxx driver but haven't loaded it yet.

It seems to be using some kind of ioctl.

-- wli