* [PATCH] kill remaining direct uses of scsi_register_host
@ 2003-05-28 10:43 Christoph Hellwig
0 siblings, 0 replies; only message in thread
From: Christoph Hellwig @ 2003-05-28 10:43 UTC (permalink / raw)
To: James.Bottomley; +Cc: linux-scsi
Together with a patch for the usb imaging drivers I just sent to
Greg this will allow us to get rid of scsi_register_host as exported
API, leaving it only for use of scsi_module.c.
diff -Nru a/drivers/scsi/arm/ecoscsi.c b/drivers/scsi/arm/ecoscsi.c
--- a/drivers/scsi/arm/ecoscsi.c Tue May 27 14:52:55 2003
+++ b/drivers/scsi/arm/ecoscsi.c Tue May 27 14:52:55 2003
@@ -21,26 +21,6 @@
* 1+ (800) 334-5454
*/
-/*
- * Options :
- *
- * PARITY - enable parity checking. Not supported.
- *
- * SCSI2 - enable support for SCSI-II tagged queueing. Untested.
- *
- * USLEEP - enable support for devices that don't disconnect. Untested.
- */
-
-/*
- * $Log: ecoscsi.c,v $
- * Revision 1.2 1998/03/08 05:49:47 davem
- * Merge to 2.1.89
- *
- * Revision 1.1 1998/02/23 02:45:24 davem
- * Merge to 2.1.88
- *
- */
-
#include <linux/module.h>
#include <linux/signal.h>
#include <linux/sched.h>
@@ -94,71 +74,8 @@
*
*/
-void ecoscsi_setup(char *str, int *ints) {
-}
-
-/*
- * Function : int ecoscsi_detect(Scsi_Host_Template * tpnt)
- *
- * Purpose : initializes ecoscsi NCR5380 driver based on the
- * command line / compile time port and irq definitions.
- *
- * Inputs : tpnt - template for this SCSI adapter.
- *
- * Returns : 1 if a host adapter was found, 0 if not.
- *
- */
-
-int ecoscsi_detect(Scsi_Host_Template * tpnt)
-{
- struct Scsi_Host *host;
-
- tpnt->proc_name = "ecoscsi";
-
- host = scsi_register (tpnt, sizeof(struct NCR5380_hostdata));
- if (!host)
- return 0;
-
- host->io_port = 0x80ce8000;
- host->n_io_port = 144;
- host->irq = IRQ_NONE;
-
- if ( !(request_region(host->io_port, host->n_io_port, "ecoscsi")) )
- goto unregister_scsi;
-
- ecoscsi_write (host, MODE_REG, 0x20); /* Is it really SCSI? */
- if (ecoscsi_read (host, MODE_REG) != 0x20) /* Write to a reg. */
- goto release_reg;
-
- ecoscsi_write( host, MODE_REG, 0x00 ); /* it back. */
- if (ecoscsi_read (host, MODE_REG) != 0x00)
- goto release_reg;
-
- NCR5380_init(host, 0);
-
- printk("scsi%d: at port 0x%08lx irqs disabled", host->host_no, host->io_port);
- printk(" options CAN_QUEUE=%d CMD_PER_LUN=%d release=%d",
- host->can_queue, host->cmd_per_lun, ECOSCSI_PUBLIC_RELEASE);
- printk("\nscsi%d:", host->host_no);
- NCR5380_print_options(host);
- printk("\n");
-
- return 1;
-
-release_reg:
- release_region(host->io_port, host->n_io_port);
-unregister_scsi:
- scsi_unregister(host);
- return 0;
-}
-
-int ecoscsi_release (struct Scsi_Host *shpnt)
+void ecoscsi_setup(char *str, int *ints)
{
- if (shpnt->irq != IRQ_NONE)
- free_irq (shpnt->irq, NULL);
- if (shpnt->io_port)
- release_region (shpnt->io_port, shpnt->n_io_port);
- return 0;
}
const char * ecoscsi_info (struct Scsi_Host *spnt)
@@ -241,8 +158,7 @@
static Scsi_Host_Template ecoscsi_template = {
.module = THIS_MODULE,
.name = "Serial Port EcoSCSI NCR5380",
- .detect = ecoscsi_detect,
- .release = ecoscsi_release,
+ .proc_name = "ecoscsi",
.info = ecoscsi_info,
.queuecommand = ecoscsi_queue_command,
.eh_abort_handler = NCR5380_abort,
@@ -256,19 +172,60 @@
.use_clustering = DISABLE_CLUSTERING
};
+static struct Scsi_Host *host;
+
static int __init ecoscsi_init(void)
{
- scsi_register_host(&ecoscsi_template);
- if (ecoscsi_template.present)
+
+ host = scsi_register(tpnt, sizeof(struct NCR5380_hostdata));
+ if (!host)
return 0;
- scsi_unregister_host(&ecoscsi_template);
+ host->io_port = 0x80ce8000;
+ host->n_io_port = 144;
+ host->irq = IRQ_NONE;
+
+ if (!(request_region(host->io_port, host->n_io_port, "ecoscsi")) )
+ goto unregister_scsi;
+
+ ecoscsi_write(host, MODE_REG, 0x20); /* Is it really SCSI? */
+ if (ecoscsi_read(host, MODE_REG) != 0x20) /* Write to a reg. */
+ goto release_reg;
+
+ ecoscsi_write(host, MODE_REG, 0x00 ); /* it back. */
+ if (ecoscsi_read(host, MODE_REG) != 0x00)
+ goto release_reg;
+
+ NCR5380_init(host, 0);
+
+ printk("scsi%d: at port 0x%08lx irqs disabled", host->host_no, host->io_port);
+ printk(" options CAN_QUEUE=%d CMD_PER_LUN=%d release=%d",
+ host->can_queue, host->cmd_per_lun, ECOSCSI_PUBLIC_RELEASE);
+ printk("\nscsi%d:", host->host_no);
+ NCR5380_print_options(host);
+ printk("\n");
+
+ scsi_add_host(host, NULL);
+ return 0;
+
+release_reg:
+ release_region(host->io_port, host->n_io_port);
+unregister_scsi:
+ scsi_unregister(host);
return -ENODEV;
}
static void __exit ecoscsi_exit(void)
{
- scsi_unregister_host(&ecoscsi_template);
+ scsi_remove_host(host);
+
+ if (shpnt->irq != IRQ_NONE)
+ free_irq(shpnt->irq, NULL);
+ if (shpnt->io_port)
+ release_region(shpnt->io_port, shpnt->n_io_port);
+
+ scsi_unregister(host);
+ return 0;
}
module_init(ecoscsi_init);
diff -Nru a/drivers/scsi/nsp32.c b/drivers/scsi/nsp32.c
--- a/drivers/scsi/nsp32.c Tue May 27 14:52:55 2003
+++ b/drivers/scsi/nsp32.c Tue May 27 14:52:55 2003
@@ -278,14 +278,12 @@
/*
* function declaration
*/
-static int nsp32_detect(Scsi_Host_Template *);
static int nsp32_queuecommand(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
static const char *nsp32_info(struct Scsi_Host *);
static int nsp32_eh_abort(Scsi_Cmnd *);
static int nsp32_eh_bus_reset(Scsi_Cmnd *);
static int nsp32_eh_host_reset(Scsi_Cmnd *);
static int nsp32_reset(Scsi_Cmnd *, unsigned int);
-static int nsp32_release(struct Scsi_Host *);
static int nsp32_proc_info(struct Scsi_Host *, char *, char **, off_t, int, int);
static int __devinit nsp32_probe(struct pci_dev *, const struct pci_device_id *);
static void __devexit nsp32_remove(struct pci_dev *);
@@ -335,11 +333,10 @@
/*
* max_sectors is currently limited up to 128.
*/
-static Scsi_Host_Template driver_template = {
- .proc_name = "nsp32",
+static Scsi_Host_Template nsp32_template = {
.name = "Workbit NinjaSCSI-32Bi/UDE",
+ .proc_name = "nsp32",
.proc_info = nsp32_proc_info,
- .detect = nsp32_detect,
.info = nsp32_info,
.queuecommand = nsp32_queuecommand,
.can_queue = 1,
@@ -352,12 +349,6 @@
.eh_device_reset_handler = NULL,
.eh_bus_reset_handler = nsp32_eh_bus_reset,
.eh_host_reset_handler = nsp32_eh_host_reset,
- .release = nsp32_release,
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,2))
- .use_new_eh_code = 1,
-#else
- /* .highmem_io = 1, */
-#endif
};
#include "nsp32_io.h"
@@ -1618,7 +1609,7 @@
* 0x900-0xbff: (map same 0x800-0x8ff I/O port image repeatedly)
* 0xc00-0xfff: CardBus status registers
*/
-static int nsp32_detect(Scsi_Host_Template *sht)
+static int nsp32_detect(struct pci_dev *pdev)
{
struct Scsi_Host *host; /* registered host structure */
int ret;
@@ -1630,7 +1621,7 @@
/*
* register this HBA as SCSI device
*/
- host = scsi_register(sht, sizeof(nsp32_hw_data));
+ host = scsi_register(&nsp32_template, sizeof(nsp32_hw_data));
if (host == NULL) {
nsp32_msg (KERN_ERR, "failed to scsi register");
goto err;
@@ -1793,8 +1784,6 @@
"NinjaSCSI-32Bi/UDE: irq %d, io 0x%lx+0x%x",
host->irq, host->io_port, host->n_io_port);
- sht->name = data->info_str;
-
/*
* SCSI bus reset
*
@@ -1832,7 +1821,9 @@
goto free_irq;
}
- return 1;
+ scsi_add_host(host, &pdev->dev);
+ pci_set_drvdata(pdev, host);
+ return 0;
free_irq:
free_irq(host->irq, data);
@@ -1852,43 +1843,7 @@
scsi_unregister(host);
err:
- return 0;
-}
-
-static int nsp32_release(struct Scsi_Host *shpnt)
-{
- nsp32_hw_data *data = (nsp32_hw_data *)shpnt->hostdata;
-
- if (data->lunt_list) {
- kfree(data->lunt_list);
- }
-
- if (data->autoparam) {
- pci_free_consistent(data->Pci, AUTOPARAM_SIZE,
- data->autoparam, data->apaddr);
- }
-
- if (data->sg_list) {
- pci_free_consistent(data->Pci,
- (sizeof(struct nsp32_sgtable) * NSP_SG_SIZE * MAX_TARGET * MAX_LUN),
- data->sg_list, data->sgaddr);
- }
-
- DEBUG(0, "free irq\n");
- if (shpnt->irq) {
- free_irq(shpnt->irq, data);
- }
-
- DEBUG(0, "free io\n");
- if (shpnt->io_port && shpnt->n_io_port) {
- release_region(shpnt->io_port, shpnt->n_io_port);
- }
-
- if (data->MmioAddress != 0) {
- iounmap((void *)(data->MmioAddress));
- }
-
- return 0;
+ return 1;
}
static const char *nsp32_info(struct Scsi_Host *shpnt)
@@ -2031,11 +1986,7 @@
pci_set_master(pdev);
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,2))
- scsi_register_host(&driver_template);
-#else
- scsi_register_module(MODULE_SCSI_HA, &driver_template);
-#endif
+ ret = nsp32_detect(pdev);
nsp32_msg(KERN_INFO, "nsp32 irq: %i mmio: 0x%lx slot: %s model: %s",
pdev->irq, data->MmioAddress, pdev->slot_name,
@@ -2043,18 +1994,23 @@
nsp32_dbg(NSP32_DEBUG_REGISTER, "exit");
- return 0;
+ return ret;
}
static void __devexit nsp32_remove(struct pci_dev *pdev)
{
- nsp32_dbg(NSP32_DEBUG_REGISTER, "enter");
-
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,2))
- scsi_unregister_host(&driver_template);
-#else
- scsi_unregister_module(MODULE_SCSI_HA, &driver_template);
-#endif
+ struct Scsi_Host *shpnt = pci_get_drvdata(pdev);
+ nsp32_hw_data *data = (nsp32_hw_data *)shpnt->hostdata;
+
+ kfree(data->lunt_list);
+ pci_free_consistent(data->Pci, AUTOPARAM_SIZE,
+ data->autoparam, data->apaddr);
+ pci_free_consistent(data->Pci,
+ (sizeof(struct nsp32_sgtable) * NSP_SG_SIZE*MAX_TARGET*MAX_LUN),
+ data->sg_list, data->sgaddr);
+ free_irq(shpnt->irq, data);
+ release_region(shpnt->io_port, shpnt->n_io_port);
+ iounmap((void *)(data->MmioAddress));
}
static struct pci_device_id nsp32_pci_table[] __devinitdata = {
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2003-05-28 10:29 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-05-28 10:43 [PATCH] kill remaining direct uses of scsi_register_host Christoph Hellwig
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox