Re: [PATCH] make sym2 scan devices again

[Christoph Hellwig <hch@lst.de>]

On Fri, Aug 08, 2003 at 09:07:54PM +0200, Christoph Hellwig wrote:
> It needs a call to scsi_scan_host to find devices.  Also remove the
> superflous scsi_set_device call - scsi_add_host does that for us.

Sorry, wrong patch - this was my whole sym2 pending queue.

diff -Nru a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c
--- a/drivers/scsi/sym53c8xx_2/sym_glue.c	Fri Aug  8 11:11:33 2003
+++ b/drivers/scsi/sym53c8xx_2/sym_glue.c	Fri Aug  8 11:11:33 2003
@@ -2015,17 +2015,17 @@
 
 	SYM_UNLOCK_HCB(np, flags);
 
-	scsi_set_device(instance, &dev->pdev->dev);
-
 	/*
 	 *  Now let the generic SCSI driver
 	 *  look for the SCSI devices on the bus ..
 	 */
-	scsi_add_host(instance, &dev->pdev->dev);
+	scsi_add_host(instance, &dev->pdev->dev); /* XXX: handle failure */
+	scsi_scan_host(instance);
 	return 0;
 
 attach_failed:
-	if (!instance) return -1;
+	if (!instance)
+		return -1;
 	printf_info("%s: giving up ...\n", sym_name(np));
 	if (np)
 		sym_free_resources(np);