From mboxrd@z Thu Jan 1 00:00:00 1970 From: Rusty Trivial Russell Subject: [TRIVIAL] Re: Remove modules.txt drivers_scsi_Kconfig II Date: Thu, 11 Sep 2003 16:39:21 +1000 Sender: linux-scsi-owner@vger.kernel.org Message-ID: <20030911064458.335DA2C26C@lists.samba.org> Return-path: Received: from dp.samba.org ([66.70.73.150]:23229 "EHLO lists.samba.org") by vger.kernel.org with ESMTP id S266183AbTIKGo6 (ORCPT ); Thu, 11 Sep 2003 02:44:58 -0400 List-Id: linux-scsi@vger.kernel.org To: torvalds@osdl.org Cc: linux-scsi@vger.kernel.org, axboe@suse.de [ modules.txt no longer exists. Replace Kconfig references with new, shorter spiel --RR ] From: Nicolas Kaiser Again. Please ignore previous patch. I had added a trailing space. Cheers, n. --- trivial-2.6.0-test5-bk1/drivers/scsi/Kconfig.orig 2003-09-11 16:25:29.000000000 +1000 +++ trivial-2.6.0-test5-bk1/drivers/scsi/Kconfig 2003-09-11 16:25:29.000000000 +1000 @@ -14,13 +14,12 @@ version of the IOMEGA ZIP drive, USB storage devices, Fibre Channel, FireWire storage and the IDE-SCSI emulation driver. - This driver is also available as a module ( = code which can be - inserted in and removed from the running kernel whenever you want). - The module will be called scsi_mod. If you want to compile it as - a module, say M here and read and - . However, do not compile this as a - module if your root file system (the one containing the directory /) - is located on a SCSI device. + To compile this driver as a module, say M here and read + . + The module will be called scsi_mod. + + However, do not compile this as a module if your root file system + (the one containing the directory /) is located on a SCSI device. config SCSI_PROC_FS bool "legacy /proc/scsi/ support" @@ -47,14 +46,14 @@ . This is NOT for SCSI CD-ROMs. - This driver is also available as a module ( = code which can be - inserted in and removed from the running kernel whenever you want). - The module will be called sd_mod. If you want to compile it as a - module, say M here and read and - . Do not compile this driver as a - module if your root file system (the one containing the directory /) - is located on a SCSI disk. In this case, do not compile the driver - for your SCSI host adapter (below) as a module either. + To compile this driver as a module, say M here and read + . + The module will be called sd_mod. + + Do not compile this driver as a module if your root file system + (the one containing the directory /) is located on a SCSI disk. + In this case, do not compile the driver for your SCSI host adapter + (below) as a module either. config CHR_DEV_ST tristate "SCSI tape support" @@ -66,11 +65,8 @@ in the kernel source. This is NOT for SCSI CD-ROMs. - This driver is also available as a module ( = code which can be - inserted in and removed from the running kernel whenever you want). - The module will be called st. If you want to compile it as a - module, say M here and read and - . + To compile this driver as a module, say M here and read + . The module will be called st. config CHR_DEV_OSST tristate "SCSI OnStream SC-x0 tape support" @@ -91,11 +87,8 @@ Please also have a look at the standard st docu, as most of it applies to osst as well. - This driver is also available as a module ( = code which can be - inserted in and removed from the running kernel whenever you want). - The module will be called osst. If you want to compile it as a - module, say M here and read and - . + To compile this driver as a module, say M here and read + . The module will be called osst. config BLK_DEV_SR tristate "SCSI CDROM support" @@ -106,11 +99,9 @@ . Also make sure to say Y or M to "ISO 9660 CD-ROM file system support" later. - This driver is also available as a module ( = code which can be - inserted in and removed from the running kernel whenever you want). - The module will be called sr_mod. If you want to compile it as a - module, say M here and read and + To compile this driver as a module, say M here and read . + The module will be called sr_mod. config BLK_DEV_SR_VENDOR bool "Enable vendor-specific extensions (for SCSI CDROM)" @@ -141,10 +132,9 @@ driver software yourself. Please read the file for more information. - If you want to compile this as a module ( = code which can be - inserted in and removed from the running kernel whenever you want), - say M here and read and + To compile this driver as a module, say M here and read . The module will be called sg. + If unsure, say N. comment "Some SCSI devices (e.g. CD jukebox) support multiple LUNs" @@ -249,10 +239,8 @@ family. Some information is in the source: . - This driver is also available as a module ( = code which can be - inserted in and removed from the running kernel whenever you want). - The module will be called wd7000. If you want to compile it as a - module, say M here and read . + To compile this driver as a module, say M here: the + module will be called wd7000. config SCSI_ACARD tristate "ACARD SCSI support" @@ -260,10 +248,8 @@ help This driver supports the ACARD 870U/W SCSI host adapter. - This driver is also available as a module ( = code which can be - inserted in and removed from the running kernel whenever you want). - The module will be called atp870u. If you want to compile it as a - module, say M here and read . + To compile this driver as a module, say M here: the + module will be called atp870u. config SCSI_AHA152X tristate "Adaptec AHA152X/2825 support" @@ -277,10 +263,8 @@ . You might also want to read the file . - This driver is also available as a module ( = code which can be - inserted in and removed from the running kernel whenever you want). - The module will be called aha152x. If you want to compile it as a - module, say M here and read . + To compile this driver as a module, say M here: the + module will be called aha152x. config SCSI_AHA1542 tristate "Adaptec AHA1542 support" @@ -293,10 +277,8 @@ sold under the Adaptec name. If it doesn't work out of the box, you may have to change some settings in . - If you want to compile this as a module ( = code which can be - inserted in and removed from the running kernel whenever you want), - say M here and read . The module - will be called aha1542. + To compile this driver as a module, say M here: the + module will be called aha1542. config SCSI_AHA1740 tristate "Adaptec AHA1740 support" @@ -308,10 +290,8 @@ of the box, you may have to change some settings in . - This driver is also available as a module ( = code which can be - inserted in and removed from the running kernel whenever you want). - The module will be called aha1740. If you want to compile it as a - module, say M here and read . + To compile this driver as a module, say M here: the + module will be called aha1740. config SCSI_AACRAID tristate "Adaptec AACRAID support (EXPERIMENTAL)" @@ -356,10 +336,8 @@ available from , can also be of great help. - If you want to compile this driver as a module ( = code which can be - inserted in and removed from the running kernel whenever you want), - say M here and read . The module - will be called aic7xxx_old. + To compile this driver as a module, say M here: the + module will be called aic7xxx_old. source "drivers/scsi/aic7xxx/Kconfig.aic79xx" @@ -372,11 +350,8 @@ well as the DPT SmartRaid V cards. This is an Adaptec maintained driver by Deanna Bonds. See . - This driver is also available as a module ( = code which can be - inserted in and removed from the running kernel whenever you want). - If you want to compile it as a module, say M here and read - . The module will be called - dpt_i2o. + To compile this driver as a module, say M here: the + module will be called dpt_i2o. config SCSI_ADVANSYS tristate "AdvanSys SCSI support" @@ -386,11 +361,8 @@ AdvanSys. It is documented in the kernel source in . - This driver is also available as a module ( = code which can be - inserted in and removed from the running kernel whenever you want). - If you want to compile it as a module, say M here and read - . The module will be called - advansys. + To compile this driver as a module, say M here: the + module will be called advansys. config SCSI_IN2000 tristate "Always IN2000 SCSI support" @@ -401,10 +373,8 @@ out of the box, you may have to change the jumpers for IRQ or address selection. - If you want to compile this as a module ( = code which can be - inserted in and removed from the running kernel whenever you want), - say M here and read . The module - will be called in2000. + To compile this driver as a module, say M here: the + module will be called in2000. # does not use pci dma and seems to be onboard only for old machines config SCSI_AM53C974 @@ -420,10 +390,8 @@ "Tekram DC390(T) and Am53/79C974 (PCscsi) SCSI support", above. You can pick either one. - If you want to compile this driver as a module ( = code which can be - inserted in and removed from the running kernel whenever you want), - say M here and read . The module - will be called AM53C974. + To compile this driver as a module, say M here: the + module will be called AM53C974. config SCSI_MEGARAID tristate "AMI MegaRAID support" @@ -432,10 +400,8 @@ This driver supports the AMI MegaRAID 418, 428, 438, 466, 762, 490 and 467 SCSI host adapters. - If you want to compile this driver as a module ( = code which can be - inserted in and removed from the running kernel whenever you want), - say M here and read . The module - will be called megaraid. + To compile this driver as a module, say M here: the + module will be called megaraid. config SCSI_BUSLOGIC tristate "BusLogic SCSI support" @@ -449,11 +415,8 @@ driver does not work correctly without modification, please contact the author, Leonard N. Zubkoff, by email to lnz@dandelion.com. - You can also build this driver as a module ( = code which can be - inserted in and removed from the running kernel whenever you want), - but only a single instance may be loaded. If you want to compile it - as a module, say M here and read . - The module will be called BusLogic. + To compile this driver as a module, say M here: the + module will be called BusLogic. config SCSI_OMIT_FLASHPOINT bool "Omit FlashPoint support" @@ -477,10 +440,8 @@ help This is support for Domex DMX3191D SCSI Host Adapters. - This driver is also available as a module ( = code which can be - inserted in and removed from the running kernel whenever you want). - The module will be called dmx3191d. If you want to compile it as - a module, say M here and read . + To compile this driver as a module, say M here: the + module will be called dmx3191d. config SCSI_DTC3280 tristate "DTC3180/3280 SCSI support" @@ -491,10 +452,8 @@ , and the file . - This driver is also available as a module ( = code which can be - inserted in and removed from the running kernel whenever you want). - The module will be called dtc. If you want to compile it as a - module, say M here and read . + To compile this driver as a module, say M here: the + module will be called dtc. config SCSI_EATA tristate "EATA ISA/EISA/PCI (DPT and generic EATA/DMA-compliant boards) support" @@ -509,10 +468,8 @@ SCSI-HOWTO, available from . - If you want to compile this as a module ( = code which can be - inserted in and removed from the running kernel whenever you want), - say M here and read . The module - will be called eata. + To compile this driver as a module, say M here: the + module will be called eata. config SCSI_EATA_TAGGED_QUEUE bool "enable tagged command queueing" @@ -557,10 +514,8 @@ numerous features. You might want to have a look at the SCSI-HOWTO, available from . - If you want to compile this as a module ( = code which can be - inserted in and removed from the running kernel whenever you want), - say M here and read . The module - will be called eata_pio. + To compile this driver as a module, say M here: the + module will be called eata_pio. config SCSI_FUTURE_DOMAIN tristate "Future Domain 16xx SCSI/AHA-2920A support" @@ -578,10 +533,8 @@ controller support"). This Future Domain driver works with the older Adaptec AHA-2920A boards with a Future Domain chip on them. - This driver is also available as a module ( = code which can be - inserted in and removed from the running kernel whenever you want). - The module will be called fdomain. If you want to compile it as a - module, say M here and read . + To compile this driver as a module, say M here: the + module will be called fdomain. config SCSI_FD_MCS tristate "Future Domain MCS-600/700 SCSI support" @@ -593,10 +546,8 @@ This driver also supports the Reply SB16/SCSI card (the SCSI part). It supports multiple adapters in the same system. - This driver is also available as a module ( = code which can be - inserted in and removed from the running kernel whenever you want). - The module will be called fd_mcs. If you want to compile it as a - module, say M here and read . + To compile this driver as a module, say M here: the + module will be called fd_mcs. config SCSI_GDTH tristate "Intel/ICP (former GDT SCSI Disk Array) RAID Controller support" @@ -609,10 +560,8 @@ in the kernel source in and - This driver is also available as a module ( = code which can be - inserted in and removed from the running kernel whenever you want). - If you want to compile it as a module, say M here and read - . + To compile this driver as a module, say M here: the + module will be called gdth. config SCSI_GENERIC_NCR5380 tristate "Generic NCR5380/53c400 SCSI PIO support" @@ -630,10 +579,8 @@ of the box, you may have to change some settings in . - This driver is also available as a module ( = code which can be - inserted in and removed from the running kernel whenever you want). - The module will be called g_NCR5380. If you want to compile it as - a module, say M here and read . + To compile this driver as a module, say M here: the + module will be called g_NCR5380. config SCSI_GENERIC_NCR5380_MMIO tristate "Generic NCR5380/53c400 SCSI MMIO support" @@ -646,11 +593,8 @@ of the box, you may have to change some settings in . - This driver is also available as a module ( = code which can - be inserted in and removed from the running kernel whenever - you want). The module will be called g_NCR5380_mmio. - If you want to compile it as a module, say M here and read - . + To compile this driver as a module, say M here: the + module will be called g_NCR5380_mmio. config SCSI_GENERIC_NCR53C400 bool "Enable NCR53c400 extensions" @@ -682,10 +626,8 @@ bootparam" or see the documentation of your boot loader about how to pass options to the kernel. - If you want to compile this driver as a module ( = code which can be - inserted in and removed from the running kernel whenever you want), - say M here and read . The module - will be called ibmmca. + To compile this driver as a module, say M here: the + module will be called ibmmca. config IBMMCA_SCSI_ORDER_STANDARD bool "Standard SCSI-order" @@ -745,11 +687,8 @@ without modification please contact the author by email at ipslinux@adaptec.com. - You can build this driver as a module ( = code which can be - inserted in and removed from the running kernel whenever you want), - but only a single instance may be loaded. If you want to compile it - as a module, say M here and read . - The module will be called ips. + To compile this driver as a module, say M here: the + module will be called ips. config SCSI_INITIO tristate "Initio 9100U(W) support" @@ -759,10 +698,8 @@ read the SCSI-HOWTO, available from . - If you want to compile this as a module ( = code which can be - inserted in and removed from the running kernel whenever you want), - say M here and read . The module - will be called initio. + To compile this driver as a module, say M here: the + module will be called initio. config SCSI_INIA100 tristate "Initio INI-A100U2W support" @@ -772,10 +709,8 @@ Please read the SCSI-HOWTO, available from . - If you want to compile this as a module ( = code which can be - inserted in and removed from the running kernel whenever you want), - say M here and read . The module - will be called a100u2w. + To compile this driver as a module, say M here: the + module will be called a100u2w. config SCSI_PPA tristate "IOMEGA parallel port (ppa - older drives)" @@ -801,10 +736,8 @@ such as a printer; it is safe to compile both drivers into the kernel. - This driver is also available as a module which can be inserted in - and removed from the running kernel whenever you want. To compile - this driver as a module, say M here and read - . The module will be called ppa. + To compile this driver as a module, say M here: the + module will be called ppa. config SCSI_IMM tristate "IOMEGA parallel port (imm - newer drives)" @@ -830,10 +763,8 @@ such as a printer; it is safe to compile both drivers into the kernel. - This driver is also available as a module which can be inserted in - and removed from the running kernel whenever you want. To compile - this driver as a module, say M here and read - . The module will be called imm. + To compile this driver as a module, say M here: the + module will be called imm. config SCSI_IZIP_EPP16 bool "ppa/imm option - Use slow (but safe) EPP-16" @@ -873,10 +804,8 @@ in the kernel source. Also read the SCSI-HOWTO, available from . - If you want to compile this driver as a module ( = code which can be - inserted in and removed from the running kernel whenever you want), - say M here and read . The module - will be called NCR53c406. + To compile this driver as a module, say M here: the + module will be called NCR53c406. config SCSI_NCR_D700 tristate "NCR Dual 700 MCA SCSI support" @@ -1106,10 +1035,8 @@ controller based on the NCR 53C94. This driver will allow use of the controller on the 3550, and very possibly others. - If you want to compile this as a module (= code which can be - inserted and removed from the running kernel whenever you want), say - M here and read . The module will - be called mca_53c9x. + To compile this driver as a module, say M here: the + module will be called mca_53c9x. config SCSI_PAS16 tristate "PAS16 SCSI support" @@ -1121,10 +1048,8 @@ of the box, you may have to change some settings in . - This driver is also available as a module ( = code which can be - inserted in and removed from the running kernel whenever you want). - The module will be called pas16. If you want to compile it as a - module, say M here and read . + To compile this driver as a module, say M here: the + module will be called pas16. config SCSI_PCI2000 tristate "PCI2000 support" @@ -1134,10 +1059,8 @@ SCSI host adapter. Please read the SCSI-HOWTO, available from . - This driver is also available as a module called pci2000 ( = code - which can be inserted in and removed from the running kernel - whenever you want). If you want to compile it as a module, say M - here and read . + To compile this driver as a module, say M here: the + module will be called pci2000. config SCSI_PCI2220I tristate "PCI2220i support" @@ -1147,10 +1070,8 @@ SCSI host adapter. Please read the SCSI-HOWTO, available from . - This driver is also available as a module called pci2220i ( = code - which can be inserted in and removed from the running kernel - whenever you want). If you want to compile it as a module, say M - here and read . + To compile this driver as a module, say M here: the + module will be called pci2220i. config SCSI_PSI240I tristate "PSI240i support" @@ -1160,10 +1081,8 @@ SCSI host adapter. Please read the SCSI-HOWTO, available from . - This driver is also available as a module called psi240i ( = code - which can be inserted in and removed from the running kernel - whenever you want). If you want to compile it as a module, say M - here and read . + To compile this driver as a module, say M here: the + module will be called psi240i. config SCSI_QLOGIC_FAS tristate "Qlogic FAS SCSI support" @@ -1182,10 +1101,8 @@ SCSI-HOWTO, available from . - This driver is also available as a module ( = code which can be - inserted in and removed from the running kernel whenever you want). - The module will be called qlogicfas. If you want to compile it as - a module, say M here and read . + To compile this driver as a module, say M here: the + module will be called qlogicfas. config SCSI_QLOGIC_ISP tristate "Qlogic ISP SCSI support" @@ -1202,10 +1119,8 @@ should also read the SCSI-HOWTO, available from . - This driver is also available as a module ( = code which can be - inserted in and removed from the running kernel whenever you want). - The module will be called qlogicisp. If you want to compile it as - a module, say M here and read . + To compile this driver as a module, say M here: the + module will be called qlogicisp. config SCSI_QLOGIC_FC tristate "Qlogic ISP FC SCSI support" @@ -1213,10 +1128,8 @@ help This is a driver for the QLogic ISP2100 SCSI-FCP host adapter. - This driver is also available as a module ( = code which can be - inserted in and removed from the running kernel whenever you want). - The module will be called qlogicfc. If you want to compile it as - a module, say M here and read . + To compile this driver as a module, say M here: the + module will be called qlogicfc. config SCSI_QLOGIC_FC_FIRMWARE bool "Include loadable firmware in driver" @@ -1232,10 +1145,8 @@ help Say Y if you have a QLogic ISP1x80/1x160 SCSI host adapter. - This driver is also available as a module ( = code which can be - inserted in and removed from the running kernel whenever you want). - The module will be called qla1280. If you want to compile it as - a module, say M here and read . + To compile this driver as a module, say M here: the + module will be called qla1280. config SCSI_QLOGIC_1280_PIO bool "Use PIO instead of MMIO" if !X86_VISWS @@ -1256,10 +1167,8 @@ PTI,ptisp or QLGC,isp. Note that PCI QLogic SCSI controllers are driven by a different driver. - This support is also available as a module called qlogicpti ( = - code which can be inserted in and removed from the running kernel - whenever you want). If you want to compile it as a module, say M - here and read . + To compile this driver as a module, say M here: the + module will be called qlogicpti. config SCSI_SEAGATE tristate "Seagate ST-02 and Future Domain TMC-8xx SCSI support" @@ -1271,10 +1180,8 @@ doesn't work out of the box, you may have to change some settings in . - This driver is also available as a module ( = code which can be - inserted in and removed from the running kernel whenever you want). - The module will be called seagate. If you want to compile it as a - module, say M here and read . + To compile this driver as a module, say M here: the + module will be called seagate. # definitely looks not 64bit safe: config SCSI_SIM710 @@ -1305,11 +1212,8 @@ insmod sym53c416 sym53c416=, [sym53c416_1=,] - There is support for up to four adapters. If you want to compile - this driver as a module ( = code which can be inserted in and - removed from the running kernel whenever you want), say M here and - read . The module will be called - sym53c416. + To compile this driver as a module, say M here: the + module will be called sym53c416. config SCSI_DC395x tristate "Tekram DC395(U/UW/F) and DC315(U) SCSI support (EXPERIMENTAL)" @@ -1323,10 +1227,8 @@ Documentation can be found in . - If you want to compile this driver as a module ( = code which can be - inserted in and removed from the running kernel whenever you want), - say M here and read . The module - will be called dc395x. + To compile this driver as a module, say M here: the + module will be called dc395x. config SCSI_DC390T tristate "Tekram DC390(T) and Am53/79C974 SCSI support" @@ -1343,10 +1245,8 @@ Also note that there is another generic Am53C974 driver, "AM53/79C974 PCI SCSI support" below. You can pick either one. - If you want to compile this driver as a module ( = code which can be - inserted in and removed from the running kernel whenever you want), - say M here and read . The module - will be called tmscsim. + To compile this driver as a module, say M here: the + module will be called tmscsim. config SCSI_DC390T_NOGENSUPP bool "_omit_ support for non-DC390 adapters" @@ -1377,10 +1277,8 @@ Adaptec, and some former Trantor products are being sold under the Adaptec name. - This driver is also available as a module ( = code which can be - inserted in and removed from the running kernel whenever you want). - The module will be called t128. If you want to compile it as a - module, say M here and read . + To compile this driver as a module, say M here: the + module will be called t128. config SCSI_U14_34F tristate "UltraStor 14F/34F support" @@ -1396,10 +1294,8 @@ below. You should say Y to both only if you want 24F support as well. - This driver is also available as a module ( = code which can be - inserted in and removed from the running kernel whenever you want). - The module will be called u14-34f. If you want to compile it as a - module, say M here and read . + To compile this driver as a module, say M here: the + module will be called u14-34f. config SCSI_U14_34F_TAGGED_QUEUE bool "enable tagged command queueing" @@ -1447,10 +1343,8 @@ Note that there is also another driver for the same hardware: "UltraStor 14F/34F support", above. - If you want to compile this as a module ( = code which can be - inserted in and removed from the running kernel whenever you want), - say M here and read . The module - will be called ultrastor. + To compile this driver as a module, say M here: the + module will be called ultrastor. config SCSI_NSP32 tristate "Workbit NinjaSCSI-32Bi/UDE support" @@ -1460,10 +1354,8 @@ SCSI host adapter. Please read the SCSI-HOWTO, available from . - If you want to compile this as a module ( = code which can be - inserted in and removed from the running kernel whenever you want), - say M here and read . The module - will be called nsp32. + To compile this driver as a module, say M here: the + module will be called nsp32. config SCSI_DEBUG tristate "SCSI debugging host simulator" @@ -1485,10 +1377,10 @@ Many Power Macintoshes and clones have a MESH (Macintosh Enhanced SCSI Hardware) SCSI bus adaptor (the 7200 doesn't, but all of the other Power Macintoshes do). Say Y to include support for this SCSI - adaptor. This driver is also available as a module called mesh - ( = code which can be inserted in and removed from the running - kernel whenever you want). If you want to compile it as a module, - say M here and read . + adaptor. + + To compile this driver as a module, say M here: the + module will be called mesh. config SCSI_MESH_SYNC_RATE int "maximum synchronous transfer rate (MB/s) (0 = async)" @@ -1518,10 +1410,8 @@ machines which only have one SCSI bus, such as the 7200, also use the 53C94. Say Y to include support for the 53C94. - This driver is also available as a module called mac53c94 ( = code - which can be inserted in and removed from the running kernel - whenever you want). If you want to compile it as a module, say M - here and read . + To compile this driver as a module, say M here: the + module will be called mac53c94. source "drivers/scsi/arm/Kconfig" @@ -1538,11 +1428,10 @@ depends on AMIGA && SCSI help If you have an Amiga 3000 and have SCSI devices connected to the - built-in SCSI controller, say Y. Otherwise, say N. This driver is - also available as a module ( = code which can be inserted in and - removed from the running kernel whenever you want). The module is - called wd33c93. If you want to compile it as a module, say M here - and read . + built-in SCSI controller, say Y. Otherwise, say N. + + To compile this driver as a module, say M here: the + module will be called wd33c93. config A4000T_SCSI bool "A4000T SCSI support (EXPERIMENTAL)" @@ -1555,10 +1444,10 @@ depends on ZORRO && SCSI help If you have a Commodore A2091 SCSI controller, say Y. Otherwise, - say N. This driver is also available as a module ( = code which can - be inserted in and removed from the running kernel whenever you - want). The module is called wd33c93. If you want to compile it as - a module, say M here and read . + say N. + + To compile this driver as a module, say M here: the + module will be called wd33c93. config GVP11_SCSI tristate "GVP Series II WD33C93A support" @@ -1570,10 +1459,8 @@ answer N. This driver does NOT work for the T-Rex series of accelerators from TekMagic and GVP-M. - This driver is also available as a module ( = code which can be - inserted in and removed from the running kernel whenever you - want). The module will be called gvp11. If you want to compile it - as a module, say M here and read . + To compile this driver as a module, say M here: the + module will be called gvp11. config CYBERSTORM_SCSI tristate "CyberStorm SCSI support" @@ -1652,14 +1539,15 @@ ---help--- If you have an Atari with built-in NCR5380 SCSI controller (TT, Falcon, ...) say Y to get it supported. Of course also, if you have - a compatible SCSI controller (e.g. for Medusa). This driver is also - available as a module ( = code which can be inserted in and removed - from the running kernel whenever you want). The module is called - atari_scsi. If you want to compile it as a module, say M here and - read . This driver supports both - styles of NCR integration into the system: the TT style (separate - DMA), and the Falcon style (via ST-DMA, replacing ACSI). It does - NOT support other schemes, like in the Hades (without DMA). + a compatible SCSI controller (e.g. for Medusa). + + To compile this driver as a module, say M here: the + module will be called atari_scsi. + + This driver supports both styles of NCR integration into the + system: the TT style (separate DMA), and the Falcon style (via + ST-DMA, replacing ACSI). It does NOT support other schemes, like + in the Hades (without DMA). config ATARI_SCSI_TOSHIBA_DELAY bool "Long delays for Toshiba CD-ROMs" @@ -1704,10 +1592,8 @@ SCSI-HOWTO, available from . - This driver is also available as a module ( = code which can be - inserted in and removed from the running kernel whenever you want). - The module will be called mac_esp. If you want to compile it as - a module, say M here and read . + To compile this driver as a module, say M here: the + module will be called mac_esp. config MVME147_SCSI bool "WD33C93 SCSI driver for MVME147" @@ -1764,10 +1650,8 @@ This is the driver for the Sun ESP SCSI host adapter. The ESP chipset is present in most SPARC SBUS-based computers. - This support is also available as a module called esp ( = code - which can be inserted in and removed from the running kernel - whenever you want). If you want to compile it as a module, say M - here and read . + To compile this driver as a module, say M here: the + module will be called esp. config SCSI_PC980155 tristate "NEC PC-9801-55 SCSI support" -- What is this? http://www.kernel.org/pub/linux/kernel/people/rusty/trivial/ Don't blame me: the Monkey is driving File: Nicolas Kaiser : Re: [PATCH] Remove modules.txt drivers_scsi_Kconfig II