linux-scsi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Adrian Bunk <bunk@fs.tum.de>
To: Marcelo Tosatti <marcelo.tosatti@cyclades.com>,
	Matt Domsch <Matt_Domsch@dell.com>,
	linux-scsi@vger.kernel.org
Subject: [2.4 patch] fix link error with both megaraid drivers
Date: Mon, 10 Nov 2003 18:44:55 +0100	[thread overview]
Message-ID: <20031110174455.GN22185@fs.tum.de> (raw)

Hi Marcelo,

the issue described below is still present in -pre9.

cu
Adrian



----- Forwarded message from Adrian Bunk <bunk@fs.tum.de> -----

Date:	Thu, 23 Oct 2003 16:07:43 +0200
From: Adrian Bunk <bunk@fs.tum.de>
To: Marcelo Tosatti <marcelo.tosatti@cyclades.com>,
	Matt Domsch <Matt_Domsch@dell.com>, linux-scsi@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Subject: [patch] 2.4.23-pre8: link error with both megaraid drivers

On Wed, Oct 22, 2003 at 09:24:17PM -0200, Marcelo Tosatti wrote:
>...
> Summary of changes from v2.4.23-pre7 to v2.4.23-pre8
> ============================================
>...
> Matt Domsch:
>   o Fix megaraid2 compilation problems
>...

Trying to compile both megaraid drivers statically into the kernel still 
fails with the following link error:

<--  snip  -->

...
ld -m elf_i386  -r -o scsidrv.o scsi_mod.o sim710.o advansys.o pci2000.o 
pci2220i.o psi240i.o BusLogic.o dpt_i2o.o u14-34f.o ultrastor.o aha152x.o 
aha1542.o aha1740.o aacraid/aacraid.o aic7xxx/aic7xxx.o aic7xxx/aic79xx.o ips.o 
fd_mcs.o fdomain.o in2000.o g_NCR5380.o NCR53c406a.o NCR_D700.o 53c700.o sym53c416.o 
qlogicfas.o qlogicisp.o qlogicfc.o qla1280.o pas16.o seagate.o t128.o dmx3191d.o 
dtc.o 53c7,8xx.o sym53c8xx_2/sym53c8xx_2.o eata_dma.o eata_pio.o wd7000.o 
NCR53C9x.o mca_53c9x.o ibmmca.o eata.o tmscsim.o AM53C974.o megaraid.o megaraid2.o 
atp870u.o gdth.o initio.o a100u2w.o ide-scsi.o 3w-xxxx.o ppa.o imm.o scsi_debug.o 
cpqfc.o nsp32.o st.o osst.o sd_mod.o sr_mod.o sg.o
megaraid2.o(.text+0x1ff0): In function `megaraid_info':
: multiple definition of `megaraid_info'
megaraid.o(.text+0x29f8): first defined here
ld: Warning: size of symbol `megaraid_info' changed from 67 in 
megaraid.o to 57 in megaraid2.o
make[3]: *** [scsidrv.o] Error 1
make[3]: Leaving directory `/home/bunk/linux/kernel-2.4/linux/kernel-2.4/linux-2.4.23-pre8-full/drivers/scsi'

<--  snip  -->

The patch below fixes this issue by disalllowing the static inclusion of 
both drivers at the same time.

cu
Adrian

--- linux-2.4.23-pre7-full/drivers/scsi/Config.in.old	2003-10-11 17:00:47.000000000 +0200
+++ linux-2.4.23-pre7-full/drivers/scsi/Config.in	2003-10-11 17:24:00.000000000 +0200
@@ -67,7 +67,12 @@
 dep_tristate 'Always IN2000 SCSI support' CONFIG_SCSI_IN2000 $CONFIG_SCSI
 dep_tristate 'AM53/79C974 PCI SCSI support' CONFIG_SCSI_AM53C974 $CONFIG_SCSI $CONFIG_PCI
 dep_tristate 'AMI MegaRAID support' CONFIG_SCSI_MEGARAID $CONFIG_SCSI
-dep_tristate 'AMI MegaRAID2 support' CONFIG_SCSI_MEGARAID2 $CONFIG_SCSI
+if [ "$CONFIG_SCSI_MEGARAID" != "y" ]; then
+  define_tristate CONFIG_SCSI_MEGARAID2_DEP $CONFIG_SCSI
+else
+  define_tristate CONFIG_SCSI_MEGARAID2_DEP m $CONFIG_SCSI
+fi
+dep_tristate 'AMI MegaRAID2 support' CONFIG_SCSI_MEGARAID2 $CONFIG_SCSI_MEGARAID2_DEP
 
 dep_tristate 'BusLogic SCSI support' CONFIG_SCSI_BUSLOGIC $CONFIG_SCSI
 if [ "$CONFIG_SCSI_BUSLOGIC" != "n" ]; then
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

----- End forwarded message -----


             reply	other threads:[~2003-11-10 17:45 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2003-11-10 17:44 Adrian Bunk [this message]
2003-11-10 18:18 ` [2.4 patch] fix link error with both megaraid drivers Marcelo Tosatti
2003-11-11 22:53   ` Adrian Bunk

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20031110174455.GN22185@fs.tum.de \
    --to=bunk@fs.tum.de \
    --cc=Matt_Domsch@dell.com \
    --cc=linux-scsi@vger.kernel.org \
    --cc=marcelo.tosatti@cyclades.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).