From mboxrd@z Thu Jan 1 00:00:00 1970 From: maple@maple.org.ua Subject: test9, aic79xx raise errors Date: Sun, 16 Nov 2003 16:11:28 +0200 Sender: linux-scsi-owner@vger.kernel.org Message-ID: <20031116141128.GA6557@valinor.localnet> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="y0ulUmNC+osPPQO6" Return-path: Received: from ua-online.net ([213.179.225.6]:63751 "EHLO center.hqhost.net") by vger.kernel.org with ESMTP id S262794AbTKPOMe (ORCPT ); Sun, 16 Nov 2003 09:12:34 -0500 Received: from valinor.localnet (valinor.localnet [10.10.1.2]) by center.hqhost.net (8.12.10/8.12.10/Debian-4) with ESMTP id hAGECMbY005512 for ; Sun, 16 Nov 2003 16:12:23 +0200 Content-Disposition: inline List-Id: linux-scsi@vger.kernel.org To: linux-scsi@vger.kernel.org Cc: maple@center.hqhost.net --y0ulUmNC+osPPQO6 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Hello! after upgrading kernel on machine to 2.6.0-test9 aic79xx driver stops working. problem raises just after cat /dev/sd{a,b} >/dev/null in 2.4.22 all is fine disabling TCQ and acpi=off didnt help. also tried other drivers (aic7xxx, aic7xxx_old), they dont see the card # lspci | grep SCSI 02:06.0 SCSI storage controller: Adaptec ASC-29320LP U320 (rev 03) machine is dual xeon 2.4 with 4G RAM and two IBM 40G disks kernel dmesg and /proc/scsi/aic79xx/0 attached If you need more info, let me know (please CC as I'm not subscribed to the list) SY, Vladimir --y0ulUmNC+osPPQO6 Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename=aic_dmesg Linux version 2.6.0-test9 (root@localhost) (gcc version 2.95.4 20011002 (Debian prerelease)) #8 SMP Sun Nov 16 06:21:44 EST 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000eff70000 (usable) BIOS-e820: 00000000eff70000 - 00000000eff7f000 (ACPI data) BIOS-e820: 00000000eff7f000 - 00000000eff80000 (ACPI NVS) BIOS-e820: 00000000eff80000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000110000000 (usable) Warning only 4GB will be used. Use a PAE enabled kernel. 3200MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f6550 hm, page 000f6000 reserved twice. hm, page 000f7000 reserved twice. hm, page 0009f000 reserved twice. hm, page 000a0000 reserved twice. On node 0 totalpages: 1048576 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 225280 pages, LIFO batch:16 HighMem zone: 819200 pages, LIFO batch:16 DMI present. ACPI: RSDP (v000 PTLTD ) @ 0x000f64b0 ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0xeff7b6fd ACPI: FADT (v001 INTEL PLACER 0x06040000 PTL 0x00000008) @ 0xeff7eee0 ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0xeff7ef54 ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0xeff7efd8 ACPI: DSDT (v001 TYAN S2665 0x06040000 MSFT 0x0100000d) @ 0x00000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:2 APIC version 20 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled) Processor #6 15:2 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 15:2 APIC version 20 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled) Processor #7 15:2 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x00] polarity[0x1] trigger[0x1] lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] polarity[0x1] trigger[0x1] lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] polarity[0x1] trigger[0x1] lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] polarity[0x1] trigger[0x1] lint[0x1]) Using ACPI for processor (LAPIC) configuration information Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: Product ID: PLACER CRB APIC at: 0xFEE00000 I/O APIC #2 Version 32 at 0xFEC00000. Enabling APIC mode: Flat. Using 1 I/O APICs Processors: 4 Building zonelist for node : 0 Kernel command line: auto BOOT_IMAGE=2.6 ro root=901 log_buf_len=64k profile=2 log_buf_len: 65536 kernel profiling enabled Initializing CPU#0 PID hash table entries: 4096 (order 12: 32768 bytes) Detected 2392.326 MHz processor. Console: colour VGA+ 80x25 Memory: 3883292k/4194304k available (2101k kernel code, 47112k reserved, 744k data, 332k init, 3014080k highmem) Calibrating delay loop... 4718.59 BogoMIPS Security Scaffold v1.0.0 initialized Capability LSM initialized Dentry cache hash table entries: 524288 (order: 9, 2097152 bytes) Inode-cache hash table entries: 262144 (order: 8, 1048576 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available CPU#0: Thermal monitoring enabled Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX CPU0: Intel(R) Xeon(TM) CPU 2.40GHz stepping 07 per-CPU timeslice cutoff: 1462.89 usecs. task migration cache decay timeout: 2 msecs. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Booting processor 1/1 eip 2000 Initializing CPU#1 masked ExtINT on CPU#1 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 4767.74 BogoMIPS CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU#1: Intel P4/Xeon Extended MCE MSRs (12) available CPU#1: Thermal monitoring enabled CPU1: Intel(R) Xeon(TM) CPU 2.40GHz stepping 07 Booting processor 2/6 eip 2000 Initializing CPU#2 masked ExtINT on CPU#2 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 4767.74 BogoMIPS CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 3 CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#2. CPU#2: Intel P4/Xeon Extended MCE MSRs (12) available CPU#2: Thermal monitoring enabled CPU2: Intel(R) Xeon(TM) CPU 2.40GHz stepping 07 Booting processor 3/7 eip 2000 Initializing CPU#3 masked ExtINT on CPU#3 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 4767.74 BogoMIPS CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 3 CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#3. CPU#3: Intel P4/Xeon Extended MCE MSRs (12) available CPU#3: Thermal monitoring enabled CPU3: Intel(R) Xeon(TM) CPU 2.40GHz stepping 07 Total of 4 processors activated (19021.82 BogoMIPS). cpu_sibling_map[0] = 1 cpu_sibling_map[1] = 0 cpu_sibling_map[2] = 3 cpu_sibling_map[3] = 2 ENABLING IO-APIC IRQs Setting 2 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 2 ... ok. init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-5, 2-11, 2-19, 2-20, 2-21, 2-22, 2-23 not connected. ..TIMER: vector=0x31 pin1=2 pin2=0 number of MP IRQ sources: 18. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00178020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0020 .... register #02: 00000000 ....... : arbitration: 00 .... register #03: 00000001 ....... : Boot DT : 1 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 001 01 0 0 0 0 0 1 1 39 02 001 01 0 0 0 0 0 1 1 31 03 001 01 0 0 0 0 0 1 1 41 04 001 01 0 0 0 0 0 1 1 49 05 000 00 1 0 0 0 0 0 0 00 06 001 01 0 0 0 0 0 1 1 51 07 001 01 0 0 0 0 0 1 1 59 08 001 01 0 0 0 0 0 1 1 61 09 001 01 0 0 0 0 0 1 1 69 0a 001 01 0 0 0 0 0 1 1 71 0b 000 00 1 0 0 0 0 0 0 00 0c 001 01 0 0 0 0 0 1 1 79 0d 001 01 0 0 0 0 0 1 1 81 0e 001 01 0 0 0 0 0 1 1 89 0f 001 01 0 0 0 0 0 1 1 91 10 001 01 1 1 0 1 0 1 1 99 11 001 01 1 1 0 1 0 1 1 A1 12 001 01 1 1 0 1 0 1 1 A9 13 000 00 1 0 0 0 0 0 0 00 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 0:16 IRQ17 -> 0:17 IRQ18 -> 0:18 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 2391.0654 MHz. ..... host bus clock speed is 132.0869 MHz. checking TSC synchronization across 4 CPUs: passed. Starting migration thread for cpu 0 Bringing up 1 CPU 1 IS NOW UP! Starting migration thread for cpu 1 Bringing up 2 CPU 2 IS NOW UP! Starting migration thread for cpu 2 Bringing up 3 CPU 3 IS NOW UP! Starting migration thread for cpu 3 CPUS done 4 NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfd915, last bus=2 PCI: Using configuration type 1 mtrr: v2.0 (20020519) SCSI subsystem initialized PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 Transparent bridge - 0000:00:1e.0 PCI: Using IRQ router PIIX [8086/24c0] at 0000:00:1f.0 PCI->APIC IRQ transform: (B0,I31,P0) -> 17 PCI->APIC IRQ transform: (B0,I31,P1) -> 17 PCI->APIC IRQ transform: (B2,I3,P0) -> 18 PCI->APIC IRQ transform: (B2,I4,P0) -> 16 PCI->APIC IRQ transform: (B2,I6,P0) -> 17 SBF: Simple Boot Flag extension found and enabled. SBF: Setting boot flags 0x80 Machine check exception polling timer started. Starting balanced_irq ikconfig 0.7 with /proc/config* highmem bounce pool size: 64 pages SGI XFS for Linux with no debug enabled pty: 256 Unix98 ptys configured Real Time Clock Driver v1.12 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin and others eth0: 0000:02:03.0, 00:E0:81:26:C0:F0, IRQ 18. Board assembly 567812-052, Physical connectors present: RJ45 Primary interface chip i82555 PHY #1. General self-test: passed. Serial sub-system self-test: passed. Internal registers self-test: passed. ROM checksum self-test: passed (0xd0a6c714). Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller at PCI slot 0000:00:1f.1 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ICH4: chipset revision 2 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1420-0x1427, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1428-0x142f, BIOS settings: hdc:pio, hdd:pio hda: ST340014A, ATA DISK drive Using anticipatory io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: max request size: 1024KiB hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100) hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 > scsi0 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.3.9 aic7901A: Ultra320 Wide Channel A, SCSI Id=7, PCI 33 or 66Mhz, 512 SCBs (scsi0:A:0): 320.000MB/s transfers (160.000MHz DT|IU|QAS, 16bit) (scsi0:A:1): 320.000MB/s transfers (160.000MHz DT|IU|QAS, 16bit) Vendor: IBM Model: IC35L036UCDY10-0 Rev: S21E Type: Direct-Access ANSI SCSI revision: 03 Vendor: IBM Model: IC35L036UCDY10-0 Rev: S21E Type: Direct-Access ANSI SCSI revision: 03 SCSI device sda: 71687340 512-byte hdwr sectors (36704 MB) SCSI device sda: drive cache: write back sda: unknown partition table Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 SCSI device sdb: 71687340 512-byte hdwr sectors (36704 MB) SCSI device sdb: drive cache: write back sdb: unknown partition table Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0 mice: PS/2 mouse device common for all mice input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1 serio: i8042 AUX port at 0x60,0x64 irq 12 input: AT Translated Set 2 keyboard on isa0060/serio0 serio: i8042 KBD port at 0x60,0x64 irq 1 md: raid0 personality registered as nr 2 md: raid1 personality registered as nr 3 md: raid5 personality registered as nr 4 raid5: measuring checksumming speed 8regs : 2756.000 MB/sec 8regs_prefetch: 2256.000 MB/sec 32regs : 1988.000 MB/sec 32regs_prefetch: 1752.000 MB/sec pIII_sse : 3060.000 MB/sec pII_mmx : 3916.000 MB/sec p5_mmx : 3828.000 MB/sec raid5: using function: pIII_sse (3060.000 MB/sec) md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 16384 buckets, 256Kbytes TCP: Hash tables configured (established 262144 bind 43690) NET: Registered protocol family 1 md: Autodetecting RAID arrays. md: autorun ... md: considering hda6 ... md: adding hda6 ... md: adding hda5 ... md: hda2 has different UUID to hda6 md: hda1 has different UUID to hda6 md: created md2 md: bind md2: WARNING: hda6 appears to be on the same physical disk as hda5. True protection against single-disk failure might be compromised. md: bind md: running: raid1: raid set md2 active with 2 out of 2 mirrors md: considering hda2 ... md: adding hda2 ... md: adding hda1 ... md: created md1 md: bind md1: WARNING: hda2 appears to be on the same physical disk as hda1. True protection against single-disk failure might be compromised. md: bind md: running: raid1: raid set md1 active with 2 out of 2 mirrors md: ... autorun DONE. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 332k freed Adding 1959920k swap on /dev/hda3. Priority:-1 extents:1 EXT3 FS on md1, internal journal md: autorun ... md: considering sda ... md: adding sda ... md: created md3 md: bind md: running: raid1: raid set md3 active with 1 out of 2 mirrors md: ... autorun DONE. kjournald starting. Commit interval 5 seconds EXT3 FS on md2, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda7, internal journal EXT3-fs: mounted filesystem with ordered data mode. scsi0:0:0:0: Attempting to abort cmd f7009e00: 0x28 0x0 0x0 0x9 0x2a 0x18 0x0 0x0 0xf8 0x0 scsi0: At time of recovery, card was not paused >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< scsi0: Dumping Card State at program address 0x1bf Mode 0x11 Card was paused HS_MAILBOX[0x0] INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x11]:(CURRFIFO_1|FIFO0FREE) SCSISIGI[0x66]:(P_DATAIN_DT|REQI|BSYI) SCSIPHASE[0x2]:(DATA_IN_PHASE) SCSIBUS[0x61] LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE) SCSISEQ0[0x0] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x10]:(FASTMODE) SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] SSTAT0[0x0] SSTAT1[0x9]:(REQINIT|BUSFREE) SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0]:(HIPERR|HIZERO) SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO) LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x81]:(LQOSTOP0) SCB Count = 4 CMDS_PENDING = 2 LASTSCB 0x2 CURRSCB 0x2 NEXTSCB 0x0 qinstart = 2417 qinfifonext = 2417 QINFIFO: WAITING_TID_QUEUES: 0 ( 0x2 ) Pending list: 2 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7] 3 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7] Total 2 Kernel Free SCB list: 1 0 Sequencer Complete DMA-inprog list: Sequencer Complete list: Sequencer DMA-Up and Complete list: scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x3 SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0xfa] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) scsi0: FIFO1 Active, LONGJMP == 0x257, SCB 0x3 SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) SEQINTSRC[0x0] DFCNTRL[0x8]:(HDMAEN) DFSTATUS[0x0] SG_CACHE_SHADOW[0x32]:(LAST_SEG) SG_STATE[0x3]:(SEGS_AVAIL|LOADING_NEEDED) DFFSXFRCTL[0x0] SOFFCNT[0xfa] MDFFSTAT[0x12]:(DATAINFIFO|LASTSDONE) SHADDR = 0x0242af200, SHCNT = 0xfffe00 HADDR = 0x0242ad000, HCNT = 0x1000 CCSGCTL[0x10]:(SG_CACHE_AVAIL) LQIN: 0x5 0x0 0x0 0x3 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x2 0x0 0x0 0x0 0x2 0x0 scsi0: LQISTATE = 0x23, LQOSTATE = 0x0, OPTIONMODE = 0x42 scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x1 SIMODE0[0xc]:(ENOVERRUN|ENIOERR) CCSCBCTL[0x4]:(CCSCBDIR) scsi0: REG0 == 0x60, SINDEX = 0x111, DINDEX = 0x102 scsi0: SCBPTR == 0x3, SCB_NEXT == 0xff00, SCB_NEXT2 == 0xffb2 CDB 28 0 0 0 43 10 STACK: 0x14 0x125 0x125 0x0 0x257 0x25e 0x94 0x257 <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> DevQ(0:0:0): 0 waiting DevQ(0:1:0): 0 waiting scsi0:0:0:0: Cmd aborted from QINFIFO scsi0:0:0:0: Attempting to abort cmd f7009e00: 0x0 0x0 0x0 0x0 0x0 0x0 scsi0: At time of recovery, card was not paused >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< scsi0: Dumping Card State at program address 0x0 Mode 0x22 Card was paused HS_MAILBOX[0x0] INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x11]:(CURRFIFO_1|FIFO0FREE) SCSISIGI[0x66]:(P_DATAIN_DT|REQI|BSYI) SCSIPHASE[0x2]:(DATA_IN_PHASE) SCSIBUS[0x61] LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE) SCSISEQ0[0x0] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x10]:(FASTMODE) SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] SSTAT0[0x0] SSTAT1[0x9]:(REQINIT|BUSFREE) SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0]:(HIPERR|HIZERO) SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO) LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x81]:(LQOSTOP0) SCB Count = 4 CMDS_PENDING = 2 LASTSCB 0x2 CURRSCB 0x2 NEXTSCB 0x0 qinstart = 2418 qinfifonext = 2418 QINFIFO: WAITING_TID_QUEUES: 0 ( 0x2 ) Pending list: 2 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7] 3 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7] Total 2 Kernel Free SCB list: 1 0 Sequencer Complete DMA-inprog list: Sequencer Complete list: Sequencer DMA-Up and Complete list: scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x3 SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0xfa] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) scsi0: FIFO1 Active, LONGJMP == 0x257, SCB 0x3 SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) SEQINTSRC[0x0] DFCNTRL[0x8]:(HDMAEN) DFSTATUS[0x0] SG_CACHE_SHADOW[0x32]:(LAST_SEG) SG_STATE[0x3]:(SEGS_AVAIL|LOADING_NEEDED) DFFSXFRCTL[0x0] SOFFCNT[0xfa] MDFFSTAT[0x12]:(DATAINFIFO|LASTSDONE) SHADDR = 0x0242af200, SHCNT = 0xfffe00 HADDR = 0x0242ad000, HCNT = 0x1000 CCSGCTL[0x10]:(SG_CACHE_AVAIL) LQIN: 0x5 0x0 0x0 0x3 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x2 0x0 0x0 0x0 0x2 0x0 scsi0: LQISTATE = 0x23, LQOSTATE = 0x0, OPTIONMODE = 0x42 scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x1 SIMODE0[0xc]:(ENOVERRUN|ENIOERR) CCSCBCTL[0x4]:(CCSCBDIR) scsi0: REG0 == 0x2, SINDEX = 0x122, DINDEX = 0x102 scsi0: SCBPTR == 0xff00, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0 CDB 0 1 0 0 0 0 STACK: 0x125 0x125 0x0 0x257 0x25e 0x94 0x29 0x15 <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> DevQ(0:0:0): 0 waiting DevQ(0:1:0): 0 waiting scsi0:0:0:0: Cmd aborted from QINFIFO scsi0:0:0:0: Attempting to abort cmd f7009c80: 0x28 0x0 0x0 0x9 0x2b 0x10 0x0 0x1 0x0 0x0 scsi0:0:0:0: Command not found scsi0:0:0:0: Attempting to abort cmd f7009c80: 0x0 0x0 0x0 0x0 0x0 0x0 scsi0: At time of recovery, card was not paused >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< scsi0: Dumping Card State at program address 0x1bf Mode 0x11 Card was paused HS_MAILBOX[0x0] INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x11]:(CURRFIFO_1|FIFO0FREE) SCSISIGI[0x64]:(P_DATAIN_DT|BSYI) SCSIPHASE[0x2]:(DATA_IN_PHASE) SCSIBUS[0x61] LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE) SCSISEQ0[0x0] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x10]:(FASTMODE) SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] SSTAT0[0x0] SSTAT1[0x9]:(REQINIT|BUSFREE) SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0]:(HIPERR|HIZERO) SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO) LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x81]:(LQOSTOP0) SCB Count = 4 CMDS_PENDING = 2 LASTSCB 0x2 CURRSCB 0x2 NEXTSCB 0x0 qinstart = 2419 qinfifonext = 2419 QINFIFO: WAITING_TID_QUEUES: 0 ( 0x2 ) Pending list: 2 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7] 3 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7] Total 2 Kernel Free SCB list: 1 0 Sequencer Complete DMA-inprog list: Sequencer Complete list: Sequencer DMA-Up and Complete list: scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x3 SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0xfa] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) scsi0: FIFO1 Active, LONGJMP == 0x257, SCB 0x3 SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) SEQINTSRC[0x0] DFCNTRL[0x8]:(HDMAEN) DFSTATUS[0x0] SG_CACHE_SHADOW[0x32]:(LAST_SEG) SG_STATE[0x3]:(SEGS_AVAIL|LOADING_NEEDED) DFFSXFRCTL[0x0] SOFFCNT[0xfa] MDFFSTAT[0x12]:(DATAINFIFO|LASTSDONE) SHADDR = 0x0242af200, SHCNT = 0xfffe00 HADDR = 0x0242ad000, HCNT = 0x1000 CCSGCTL[0x10]:(SG_CACHE_AVAIL) LQIN: 0x5 0x0 0x0 0x3 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x2 0x0 0x0 0x0 0x2 0x0 scsi0: LQISTATE = 0x23, LQOSTATE = 0x0, OPTIONMODE = 0x42 scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x1 SIMODE0[0xc]:(ENOVERRUN|ENIOERR) CCSCBCTL[0x4]:(CCSCBDIR) scsi0: REG0 == 0x60, SINDEX = 0x111, DINDEX = 0x102 scsi0: SCBPTR == 0x3, SCB_NEXT == 0xff00, SCB_NEXT2 == 0xffb2 CDB 28 0 0 0 43 10 STACK: 0x14 0x125 0x125 0x0 0x257 0x25e 0x94 0x257 <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> DevQ(0:0:0): 0 waiting DevQ(0:1:0): 0 waiting scsi0:0:0:0: Cmd aborted from QINFIFO Recovery code sleeping Recovery code awake Timer Expired scsi0: Device reset returning 0x2003 Recovery SCB completes scsi: Device offlined - not ready after error recovery: host 0 channel 0 id 0 lun 0 SCSI error : <0 0 0 0> return code = 0x6000000 end_request: I/O error, dev sda, sector 600848 Buffer I/O error on device sda, logical block 150212 Buffer I/O error on device sda, logical block 150213 Buffer I/O error on device sda, logical block 150214 Buffer I/O error on device sda, logical block 150215 Buffer I/O error on device sda, logical block 150216 Buffer I/O error on device sda, logical block 150217 Buffer I/O error on device sda, logical block 150218 Buffer I/O error on device sda, logical block 150219 Buffer I/O error on device sda, logical block 150220 Buffer I/O error on device sda, logical block 150221 Buffer I/O error on device sda, logical block 150222 Buffer I/O error on device sda, logical block 150223 Buffer I/O error on device sda, logical block 150224 Buffer I/O error on device sda, logical block 150225 Buffer I/O error on device sda, logical block 150226 Buffer I/O error on device sda, logical block 150227 Buffer I/O error on device sda, logical block 150228 Buffer I/O error on device sda, logical block 150229 Buffer I/O error on device sda, logical block 150230 Buffer I/O error on device sda, logical block 150231 Buffer I/O error on device sda, logical block 150232 Buffer I/O error on device sda, logical block 150233 Buffer I/O error on device sda, logical block 150234 Buffer I/O error on device sda, logical block 150235 Buffer I/O error on device sda, logical block 150236 Buffer I/O error on device sda, logical block 150237 Buffer I/O error on device sda, logical block 150238 Buffer I/O error on device sda, logical block 150239 Buffer I/O error on device sda, logical block 150240 Buffer I/O error on device sda, logical block 150241 Buffer I/O error on device sda, logical block 150242 Buffer I/O error on device sda, logical block 150243 Buffer I/O error on device sda, logical block 150244 Buffer I/O error on device sda, logical block 150245 Buffer I/O error on device sda, logical block 150246 Buffer I/O error on device sda, logical block 150247 Buffer I/O error on device sda, logical block 150248 Buffer I/O error on device sda, logical block 150249 Buffer I/O error on device sda, logical block 150250 Buffer I/O error on device sda, logical block 150251 Buffer I/O error on device sda, logical block 150252 Buffer I/O error on device sda, logical block 150253 Buffer I/O error on device sda, logical block 150254 Buffer I/O error on device sda, logical block 150255 Buffer I/O error on device sda, logical block 150256 Buffer I/O error on device sda, logical block 150257 Buffer I/O error on device sda, logical block 150258 Buffer I/O error on device sda, logical block 150259 Buffer I/O error on device sda, logical block 150260 Buffer I/O error on device sda, logical block 150261 Buffer I/O error on device sda, logical block 150262 Buffer I/O error on device sda, logical block 150263 Buffer I/O error on device sda, logical block 150264 Buffer I/O error on device sda, logical block 150265 Buffer I/O error on device sda, logical block 150266 Buffer I/O error on device sda, logical block 150267 Buffer I/O error on device sda, logical block 150268 Buffer I/O error on device sda, logical block 150269 Buffer I/O error on device sda, logical block 150270 Buffer I/O error on device sda, logical block 150271 Buffer I/O error on device sda, logical block 150272 Buffer I/O error on device sda, logical block 150273 Buffer I/O error on device sda, logical block 150274 Buffer I/O error on device sda, logical block 150275 Buffer I/O error on device sda, logical block 150150 Buffer I/O error on device sda, logical block 150151 Buffer I/O error on device sda, logical block 150152 Buffer I/O error on device sda, logical block 150153 Buffer I/O error on device sda, logical block 150154 Buffer I/O error on device sda, logical block 150155 Buffer I/O error on device sda, logical block 150156 Buffer I/O error on device sda, logical block 150157 Buffer I/O error on device sda, logical block 150158 Buffer I/O error on device sda, logical block 150159 Buffer I/O error on device sda, logical block 150160 Buffer I/O error on device sda, logical block 150161 Buffer I/O error on device sda, logical block 150162 Buffer I/O error on device sda, logical block 150163 Buffer I/O error on device sda, logical block 150164 Buffer I/O error on device sda, logical block 150165 Buffer I/O error on device sda, logical block 150166 Buffer I/O error on device sda, logical block 150167 Buffer I/O error on device sda, logical block 150168 Buffer I/O error on device sda, logical block 150169 Buffer I/O error on device sda, logical block 150170 Buffer I/O error on device sda, logical block 150171 Buffer I/O error on device sda, logical block 150172 Buffer I/O error on device sda, logical block 150173 Buffer I/O error on device sda, logical block 150174 Buffer I/O error on device sda, logical block 150175 Buffer I/O error on device sda, logical block 150176 Buffer I/O error on device sda, logical block 150177 Buffer I/O error on device sda, logical block 150178 Buffer I/O error on device sda, logical block 150179 Buffer I/O error on device sda, logical block 150180 Buffer I/O error on device sda, logical block 150181 Buffer I/O error on device sda, logical block 150182 Buffer I/O error on device sda, logical block 150183 Buffer I/O error on device sda, logical block 150184 Buffer I/O error on device sda, logical block 150185 Buffer I/O error on device sda, logical block 150186 Buffer I/O error on device sda, logical block 150187 Buffer I/O error on device sda, logical block 150188 Buffer I/O error on device sda, logical block 150189 Buffer I/O error on device sda, logical block 150190 Buffer I/O error on device sda, logical block 150191 Buffer I/O error on device sda, logical block 150192 Buffer I/O error on device sda, logical block 150193 Buffer I/O error on device sda, logical block 150194 Buffer I/O error on device sda, logical block 150195 Buffer I/O error on device sda, logical block 150196 Buffer I/O error on device sda, logical block 150197 Buffer I/O error on device sda, logical block 150198 Buffer I/O error on device sda, logical block 150199 Buffer I/O error on device sda, logical block 150200 Buffer I/O error on device sda, logical block 150201 Buffer I/O error on device sda, logical block 150202 Buffer I/O error on device sda, logical block 150203 Buffer I/O error on device sda, logical block 150204 Buffer I/O error on device sda, logical block 150205 Buffer I/O error on device sda, logical block 150206 Buffer I/O error on device sda, logical block 150207 Buffer I/O error on device sda, logical block 150208 Buffer I/O error on device sda, logical block 150209 Buffer I/O error on device sda, logical block 150210 Buffer I/O error on device sda, logical block 150211 scsi0 (0:0): rejecting I/O to offline device Buffer I/O error on device sda, logical block 150150 Buffer I/O error on device sda, logical block 150151 --y0ulUmNC+osPPQO6 Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename=aic_info Adaptec AIC79xx driver version: 1.3.9 Adaptec 29320LP Ultra320 SCSI adapter aic7901A: Ultra320 Wide Channel A, SCSI Id=7, PCI 33 or 66Mhz, 512 SCBs Allocated SCBs: 4, SG List Length: 128 Serial EEPROM: 0x17c8 0x17c8 0x17c8 0x17c8 0x17c8 0x17c8 0x17c8 0x17c8 0x17c8 0x17c8 0x17c8 0x17c8 0x17c8 0x17c8 0x17c8 0x17c8 0x09f4 0x01c7 0x2807 0x0010 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0x0410 0xb458 Target 0 Negotiation Settings User: 320.000MB/s transfers (160.000MHz DT|IU|QAS, 16bit) Goal: 320.000MB/s transfers (160.000MHz DT|IU|QAS, 16bit) Curr: 320.000MB/s transfers (160.000MHz DT|IU|QAS, 16bit) Transmission Errors 0 Channel A Target 0 Lun 0 Settings Commands Queued 12 Commands Active 0 Command Openings 253 Max Tagged Openings 253 Device Queue Frozen Count 0 Target 1 Negotiation Settings User: 320.000MB/s transfers (160.000MHz DT|IU|QAS, 16bit) Goal: 320.000MB/s transfers (160.000MHz DT|IU|QAS, 16bit) Curr: 320.000MB/s transfers (160.000MHz DT|IU|QAS, 16bit) Transmission Errors 0 Channel A Target 1 Lun 0 Settings Commands Queued 11 Commands Active 0 Command Openings 253 Max Tagged Openings 253 Device Queue Frozen Count 0 Target 2 Negotiation Settings User: 320.000MB/s transfers (160.000MHz DT|IU|QAS, 16bit) Target 3 Negotiation Settings User: 320.000MB/s transfers (160.000MHz DT|IU|QAS, 16bit) Target 4 Negotiation Settings User: 320.000MB/s transfers (160.000MHz DT|IU|QAS, 16bit) Target 5 Negotiation Settings User: 320.000MB/s transfers (160.000MHz DT|IU|QAS, 16bit) Target 6 Negotiation Settings User: 320.000MB/s transfers (160.000MHz DT|IU|QAS, 16bit) Target 7 Negotiation Settings User: 320.000MB/s transfers (160.000MHz DT|IU|QAS, 16bit) Target 8 Negotiation Settings User: 320.000MB/s transfers (160.000MHz DT|IU|QAS, 16bit) Target 9 Negotiation Settings User: 320.000MB/s transfers (160.000MHz DT|IU|QAS, 16bit) Target 10 Negotiation Settings User: 320.000MB/s transfers (160.000MHz DT|IU|QAS, 16bit) Target 11 Negotiation Settings User: 320.000MB/s transfers (160.000MHz DT|IU|QAS, 16bit) Target 12 Negotiation Settings User: 320.000MB/s transfers (160.000MHz DT|IU|QAS, 16bit) Target 13 Negotiation Settings User: 320.000MB/s transfers (160.000MHz DT|IU|QAS, 16bit) Target 14 Negotiation Settings User: 320.000MB/s transfers (160.000MHz DT|IU|QAS, 16bit) Target 15 Negotiation Settings User: 320.000MB/s transfers (160.000MHz DT|IU|QAS, 16bit) --y0ulUmNC+osPPQO6--