From mboxrd@z Thu Jan 1 00:00:00 1970 From: Kevin Tappe Subject: g_NCR5380 - 2.6.0 - problem with reloading module Date: Mon, 5 Jan 2004 23:42:20 +0100 Sender: linux-scsi-owner@vger.kernel.org Message-ID: <20040105224220.GA1168@nihil.tappe.netz> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Received: from imap.gmx.net ([213.165.64.20]:9102 "HELO mail.gmx.net") by vger.kernel.org with SMTP id S265992AbUAEWmV (ORCPT ); Mon, 5 Jan 2004 17:42:21 -0500 Received: from kevin by nihil.tappe.netz with local (Exim 3.35 #1 (Debian)) id 1AddQS-0000K1-00 for ; Mon, 05 Jan 2004 23:42:20 +0100 Content-Disposition: inline List-Id: linux-scsi@vger.kernel.org To: linux-scsi@vger.kernel.org Hi, i hope this is the right emailadress for my problem... The first time I load the module g_NCR5380 everything works fine: scsi0 : interrupts not enabled. for better interactive performance, scsi0 : please jumper the board for a free IRQ. scsi0 : at port 0x280 interrupts disabled options CAN_QUEUE=16 CMD_PER_LUN=2 release=1 generic options AUTOPROBE_IRQ AUTOSENSE USLEEP, USLEEP_POLL=1 USLEEP_SLEEP=20 generic release=7 scsi0 : Generic NCR5380/53C400 Driver Vendor: UMAX Model: Astra 1200S Rev: V2.9 Type: Scanner ANSI SCSI revision: 02 Attached scsi generic sg0 at scsi0, channel 0, id 5, lun 0, type 6 I can't reload the module g_NCR5380 after an rmmod: nihil:~# modprobe -v g_NCR5380 insmod /lib/modules/2.6.0/kernel/drivers/scsi/g_NCR5380.ko ncr_irq=255 ncr_addr=0x280 dtc_3181e=1 FATAL: Error inserting g_NCR5380 (/lib/modules/2.6.0/kernel/drivers/scsi/g_NCR53 80.ko): No such device After a reboot everything is just fine again. I use a vanilla 2.6.0 kernel. Please let me know if you need any further information. -Kevin -- Think how much fear is going to be required to stop people from passing along copies of things on their computers. I hope you don't want to live in a world with that much fear. - Richard M. Stallman