From: "christophe.varoqui" <christophe.varoqui@free.fr>
To: Andrew Vasquez <andrew.vasquez@qlogic.com>
Cc: linux-scsi@vger.kernel.org
Subject: Re: Removing the qlogicfc driver
Date: Sat, 17 Jan 2004 13:57:54 +0100 [thread overview]
Message-ID: <200401171357.54813.christophe.varoqui@free.fr> (raw)
In-Reply-To: <B179AE41C1147041AA1121F44614F0B0598E38@AVEXCH02.qlogic.org>
On Friday 16 January 2004 23:57, Andrew Vasquez wrote:
> Hmm, from the output of proc/scsi/qla* your two 2200 don't appear to
> be recognizing any devices after the SNS scan:
> Could you enable enable a couple of debug swtiches:
> Andrew Vasquez
Yes, here it is :
qla2200 0000:03:01.0: Found an ISP2200, irq 20, iobase 0xf8848000
qla2200 0000:03:01.0: Configuring PCI space...
qla2200 0000:03:01.0: Configure NVRAM parameters...
qla2200 0000:03:01.0: Verifying loaded RISC code...
scsi(4): **** Load RISC code ****
scsi(4): Verifying Checksum of loaded RISC code.
scsi(4): Checksum OK, start firmware.
scsi(4): Issue init firmware.
qla2200 0000:03:01.0: Waiting for LIP to complete...
scsi(4): Asynchronous P2P MODE received.
scsi(4): Asynchronous P2P MODE received.
scsi(4): Asynchronous LOOP UP (1 Gbps).
qla2200 0000:03:01.0: LOOP UP detected (1 Gbps).
scsi(4): Asynchronous PORT UPDATE.
scsi(4): Port database changed 0000 4000.
scsi(4): F/W Ready - OK
scsi(4): fw_state=3 curr time=4926cc4.
qla2200 0000:03:01.0: Topology - (F_Port), Host Loop address 0xffff
scsi(4): Configure loop -- dpc flags =0x80040
scsi(4): RSCN queue entry[0] = [00/000000].
scsi(4): device_resync: rscn overflow.
qla2x00_mailbox_command(4): **** FAILED. mbx0=4005, mbx1=0, mbx2=3c, cmd=54
****
qla2x00_issue_iocb(4): failed rval 0x102qla2x00_issue_iocb(4): failed rval
0x102scsi(4): RFT_ID issue IOCB failed (258).
scsi(4): Register FC-4 TYPE failed.
qla2x00_mailbox_command(4): **** FAILED. mbx0=4005, mbx1=0, mbx2=3c, cmd=54
****
qla2x00_issue_iocb(4): failed rval 0x102qla2x00_issue_iocb(4): failed rval
0x102scsi(4): RFF_ID issue IOCB failed (258).
scsi(4): Register FC-4 Features failed.
qla2x00_mailbox_command(4): **** FAILED. mbx0=4005, mbx1=0, mbx2=3c, cmd=54
****
qla2x00_issue_iocb(4): failed rval 0x102qla2x00_issue_iocb(4): failed rval
0x102scsi(4): RNN_ID issue IOCB failed (258).
scsi(4): Register Node Name failed.
qla2x00_mailbox_command(4): **** FAILED. mbx0=4005, mbx1=0, mbx2=3c, cmd=54
****
qla2x00_issue_iocb(4): failed rval 0x102qla2x00_issue_iocb(4): failed rval
0x102scsi(4): GID_PT issue IOCB failed (258).
qla2x00_mailbox_command(4): **** FAILED. mbx0=4005, mbx1=0, mbx2=3c, cmd=54
****
qla2x00_issue_iocb(4): failed rval 0x102qla2x00_issue_iocb(4): failed rval
0x102scsi(4): GA_NXT issue IOCB failed (258).
scsi(4): Configure fabric error exit: rval=258
scsi(4): LOOP READY
DEBUG: detect hba 4 at address = e45201d4
scsi4 : qla2xxx
qla2200 0000:03:01.0:
QLogic Fibre Channel HBA Driver: 8.00.00b9-debug
QLogic QLA22xx -
ISP2200: PCI (66 MHz) @ 0000:03:01.0 hdma-, host#=4, fw=2.02.06 TP
qla2200 0000:06:01.0: Found an ISP2200, irq 24, iobase 0xf884a000
qla2200 0000:06:01.0: Configuring PCI space...
qla2200 0000:06:01.0: Configure NVRAM parameters...
qla2200 0000:06:01.0: Verifying loaded RISC code...
scsi(5): **** Load RISC code ****
scsi(4): Asynchronous PORT UPDATE ignored.
scsi(5): Verifying Checksum of loaded RISC code.
scsi(5): Checksum OK, start firmware.
scsi(5): Issue init firmware.
qla2200 0000:06:01.0: Waiting for LIP to complete...
scsi(5): Asynchronous LIP RESET (f7f7).
qla2200 0000:06:01.0: LIP reset occured (f7f7).
scsi(5): Asynchronous P2P MODE received.
scsi(5): Asynchronous LOOP UP (1 Gbps).
qla2200 0000:06:01.0: LOOP UP detected (1 Gbps).
scsi(5): Asynchronous PORT UPDATE.
scsi(5): Port database changed 0000 4000.
scsi(5): F/W Ready - OK
scsi(5): fw_state=3 curr time=492762e.
qla2200 0000:06:01.0: Topology - (F_Port), Host Loop address 0xffff
scsi(5): Configure loop -- dpc flags =0x80040
scsi(5): RSCN queue entry[0] = [00/000000].
scsi(5): device_resync: rscn overflow.
qla2x00_mailbox_command(5): **** FAILED. mbx0=4005, mbx1=0, mbx2=3c, cmd=54
****
qla2x00_issue_iocb(5): failed rval 0x102qla2x00_issue_iocb(5): failed rval
0x102scsi(5): RFT_ID issue IOCB failed (258).
scsi(5): Register FC-4 TYPE failed.
qla2x00_mailbox_command(5): **** FAILED. mbx0=4005, mbx1=0, mbx2=3c, cmd=54
****
qla2x00_issue_iocb(5): failed rval 0x102qla2x00_issue_iocb(5): failed rval
0x102scsi(5): RFF_ID issue IOCB failed (258).
scsi(5): Register FC-4 Features failed.
qla2x00_mailbox_command(5): **** FAILED. mbx0=4005, mbx1=0, mbx2=3c, cmd=54
****
qla2x00_issue_iocb(5): failed rval 0x102qla2x00_issue_iocb(5): failed rval
0x102scsi(5): RNN_ID issue IOCB failed (258).
scsi(5): Register Node Name failed.
qla2x00_mailbox_command(5): **** FAILED. mbx0=4005, mbx1=0, mbx2=3c, cmd=54
****
qla2x00_issue_iocb(5): failed rval 0x102qla2x00_issue_iocb(5): failed rval
0x102scsi(5): GID_PT issue IOCB failed (258).
qla2x00_mailbox_command(5): **** FAILED. mbx0=4005, mbx1=0, mbx2=3c, cmd=54
****
qla2x00_issue_iocb(5): failed rval 0x102qla2x00_issue_iocb(5): failed rval
0x102scsi(5): GA_NXT issue IOCB failed (258).
scsi(5): Configure fabric error exit: rval=258
scsi(5): LOOP READY
DEBUG: detect hba 5 at address = dd9741d4
scsi5 : qla2xxx
qla2200 0000:06:01.0:
QLogic Fibre Channel HBA Driver: 8.00.00b9-debug
QLogic QLA22xx -
ISP2200: PCI (66 MHz) @ 0000:06:01.0 hdma-, host#=5, fw=2.02.06 TP
scsi(5): Asynchronous PORT UPDATE ignored.
scsi(5): Asynchronous PORT UPDATE ignored.
scsi(5): Asynchronous PORT UPDATE ignored.
regards,
cvaroqui
next parent reply other threads:[~2004-01-17 12:59 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <B179AE41C1147041AA1121F44614F0B0598E38@AVEXCH02.qlogic.org>
2004-01-17 12:57 ` christophe.varoqui [this message]
2004-01-17 20:21 ` Removing the qlogicfc driver Andrew Vasquez
2004-01-18 21:14 ` christophe.varoqui
2004-01-20 0:46 Andrew Vasquez
2004-01-20 13:42 ` christophe.varoqui
2004-02-01 16:09 ` Christoph Hellwig
2004-02-01 16:52 ` christophe varoqui
-- strict thread matches above, loose matches on Subject: below --
2004-01-19 17:28 Andrew Vasquez
2004-01-16 22:18 christophe.varoqui
2004-01-16 16:49 James Bottomley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200401171357.54813.christophe.varoqui@free.fr \
--to=christophe.varoqui@free.fr \
--cc=andrew.vasquez@qlogic.com \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox