* [PATCH] fix up ini9100 interrupt handling
@ 2004-02-06 15:59 Christoph Hellwig
0 siblings, 0 replies; only message in thread
From: Christoph Hellwig @ 2004-02-06 15:59 UTC (permalink / raw)
To: James Bottomley; +Cc: linux-scsi
Currently is has a different irq handler for every "supported" chip.
Make use of the private data passed to request_irq instead.
--- 1.20/drivers/scsi/ini9100u.c Tue Dec 23 00:28:28 2003
+++ edited/drivers/scsi/ini9100u.c Wed Feb 4 05:38:11 2004
@@ -272,6 +272,17 @@
return (pSRB);
}
+static irqreturn_t i91u_intr(int irqno, void *dev_id, struct pt_regs *regs)
+{
+ struct Scsi_Host *dev = dev_id;
+ unsigned long flags;
+
+ spin_lock_irqsave(dev->host_lock, flags);
+ tul_isr((HCS *)hreg->base);
+ spin_unlock_irqrestore(dev->host_lock, flags);
+ return IRQ_HANDLED;
+}
+
/* called from init/main.c */
void i91u_setup(char *str, int *ints)
@@ -396,8 +407,7 @@
pHCB->HCS_Index = i; /* 7/29/98 */
hreg = scsi_register(tpnt, sizeof(HCS));
- if(hreg == NULL)
- {
+ if(hreg == NULL) {
release_region(pHCB->HCS_Base, 256);
return 0;
}
@@ -413,48 +423,10 @@
hreg->sg_tablesize = TOTAL_SG_ENTRY; /* Maximun support is 32 */
/* Initial tulip chip */
- switch (i) {
- case 0:
- ok = request_irq(pHCB->HCS_Intr, i91u_intr0, SA_INTERRUPT | SA_SHIRQ, "i91u", hreg);
- break;
- case 1:
- ok = request_irq(pHCB->HCS_Intr, i91u_intr1, SA_INTERRUPT | SA_SHIRQ, "i91u", hreg);
- break;
- case 2:
- ok = request_irq(pHCB->HCS_Intr, i91u_intr2, SA_INTERRUPT | SA_SHIRQ, "i91u", hreg);
- break;
- case 3:
- ok = request_irq(pHCB->HCS_Intr, i91u_intr3, SA_INTERRUPT | SA_SHIRQ, "i91u", hreg);
- break;
- case 4:
- ok = request_irq(pHCB->HCS_Intr, i91u_intr4, SA_INTERRUPT | SA_SHIRQ, "i91u", hreg);
- break;
- case 5:
- ok = request_irq(pHCB->HCS_Intr, i91u_intr5, SA_INTERRUPT | SA_SHIRQ, "i91u", hreg);
- break;
- case 6:
- ok = request_irq(pHCB->HCS_Intr, i91u_intr6, SA_INTERRUPT | SA_SHIRQ, "i91u", hreg);
- break;
- case 7:
- ok = request_irq(pHCB->HCS_Intr, i91u_intr7, SA_INTERRUPT | SA_SHIRQ, "i91u", hreg);
- break;
- default:
- i91u_panic("i91u: Too many host adapters\n");
- break;
- }
+ ok = request_irq(pHCB->HCS_Intr, i91u_intr, SA_INTERRUPT | SA_SHIRQ, "i91u", hreg);
if (ok < 0) {
- if (ok == -EINVAL) {
- printk("i91u: bad IRQ %d.\n", pHCB->HCS_Intr);
- printk(" Contact author.\n");
- } else if (ok == -EBUSY)
- printk("i91u: IRQ %d already in use. Configure another.\n",
- pHCB->HCS_Intr);
- else {
- printk("\ni91u: Unexpected error code on requesting IRQ %d.\n",
- pHCB->HCS_Intr);
- printk(" Contact author.\n");
- }
- i91u_panic("i91u: driver needs an IRQ.\n");
+ printk(KERN_WARNING "i91u: unable to request IRQ %d\n\n", pHCB->HCS_Intr);
+ return 0;
}
}
@@ -729,137 +701,6 @@
tul_release_scb(pHCB, pSCB); /* Release SCB for current channel */
}
return;
-}
-
-/*
- * Interrupts handler (main routine of the driver)
- */
-static irqreturn_t i91u_intr0(int irqno, void *dev_id, struct pt_regs *regs)
-{
- unsigned long flags;
- struct Scsi_Host *dev = dev_id;
-
- if (tul_hcs[0].HCS_Intr != irqno)
- return IRQ_NONE;
-
- spin_lock_irqsave(dev->host_lock, flags);
-
- tul_isr(&tul_hcs[0]);
-
- spin_unlock_irqrestore(dev->host_lock, flags);
- return IRQ_HANDLED;
-}
-
-static irqreturn_t i91u_intr1(int irqno, void *dev_id, struct pt_regs *regs)
-{
- unsigned long flags;
- struct Scsi_Host *dev = dev_id;
-
- if (tul_hcs[1].HCS_Intr != irqno)
- return IRQ_NONE;
-
- spin_lock_irqsave(dev->host_lock, flags);
-
- tul_isr(&tul_hcs[1]);
-
- spin_unlock_irqrestore(dev->host_lock, flags);
- return IRQ_HANDLED;
-}
-
-static irqreturn_t i91u_intr2(int irqno, void *dev_id, struct pt_regs *regs)
-{
- unsigned long flags;
- struct Scsi_Host *dev = dev_id;
-
- if (tul_hcs[2].HCS_Intr != irqno)
- return IRQ_NONE;
-
- spin_lock_irqsave(dev->host_lock, flags);
-
- tul_isr(&tul_hcs[2]);
-
- spin_unlock_irqrestore(dev->host_lock, flags);
- return IRQ_HANDLED;
-}
-
-static irqreturn_t i91u_intr3(int irqno, void *dev_id, struct pt_regs *regs)
-{
- unsigned long flags;
- struct Scsi_Host *dev = dev_id;
-
- if (tul_hcs[3].HCS_Intr != irqno)
- return IRQ_NONE;
-
- spin_lock_irqsave(dev->host_lock, flags);
-
- tul_isr(&tul_hcs[3]);
-
- spin_unlock_irqrestore(dev->host_lock, flags);
- return IRQ_HANDLED;
-}
-
-static irqreturn_t i91u_intr4(int irqno, void *dev_id, struct pt_regs *regs)
-{
- unsigned long flags;
- struct Scsi_Host *dev = dev_id;
-
- if (tul_hcs[4].HCS_Intr != irqno)
- return IRQ_NONE;
-
- spin_lock_irqsave(dev->host_lock, flags);
-
- tul_isr(&tul_hcs[4]);
-
- spin_unlock_irqrestore(dev->host_lock, flags);
- return IRQ_HANDLED;
-}
-
-static irqreturn_t i91u_intr5(int irqno, void *dev_id, struct pt_regs *regs)
-{
- unsigned long flags;
- struct Scsi_Host *dev = dev_id;
-
- if (tul_hcs[5].HCS_Intr != irqno)
- return IRQ_NONE;
-
- spin_lock_irqsave(dev->host_lock, flags);
-
- tul_isr(&tul_hcs[5]);
-
- spin_unlock_irqrestore(dev->host_lock, flags);
- return IRQ_HANDLED;
-}
-
-static irqreturn_t i91u_intr6(int irqno, void *dev_id, struct pt_regs *regs)
-{
- unsigned long flags;
- struct Scsi_Host *dev = dev_id;
-
- if (tul_hcs[6].HCS_Intr != irqno)
- return IRQ_NONE;
-
- spin_lock_irqsave(dev->host_lock, flags);
-
- tul_isr(&tul_hcs[6]);
-
- spin_unlock_irqrestore(dev->host_lock, flags);
- return IRQ_HANDLED;
-}
-
-static irqreturn_t i91u_intr7(int irqno, void *dev_id, struct pt_regs *regs)
-{
- unsigned long flags;
- struct Scsi_Host *dev = dev_id;
-
- if (tul_hcs[7].HCS_Intr != irqno)
- return IRQ_NONE;
-
- spin_lock_irqsave(dev->host_lock, flags);
-
- tul_isr(&tul_hcs[7]);
-
- spin_unlock_irqrestore(dev->host_lock, flags);
- return IRQ_HANDLED;
}
/*
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2004-02-06 15:59 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-02-06 15:59 [PATCH] fix up ini9100 interrupt handling Christoph Hellwig
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox