From mboxrd@z Thu Jan 1 00:00:00 1970 From: Hans Forbrich Subject: Where do I send this bug report? Date: Sun, 29 Feb 2004 14:48:11 -0700 Sender: linux-scsi-owner@vger.kernel.org Message-ID: <200402291448.12004.hforbric_linux1@telus.net> Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Return-path: Received: from outbound04.telus.net ([199.185.220.223]:42666 "EHLO priv-edtnes27.telusplanet.net") by vger.kernel.org with ESMTP id S262152AbUB2VsK (ORCPT ); Sun, 29 Feb 2004 16:48:10 -0500 Received: from linux.forbrichcomputing.ca ([161.184.143.77]) by priv-edtnes27.telusplanet.net (InterMail vM.6.00.05.02 201-2115-109-103-20031105) with ESMTP id <20040229214809.HQHJ25097.priv-edtnes27.telusplanet.net@linux.forbrichcomputing.ca> for ; Sun, 29 Feb 2004 14:48:09 -0700 Content-Disposition: inline List-Id: linux-scsi@vger.kernel.org To: SCSI Mailing List Hi. I'm new to the mailing list, and to SCSI under Linux. I just added an Adaptec 29160 and a used Benchmark VS80/DLT1 (aka Quantum VS80 & Dell PowerVault 110T) to my SuSE SLES8 machine. On boot I get the message at the bottom (as well as other messages - don't want to clutter this list). Now I need advice where to send the bug report and what followup to consider. TIA /Hans from DMESG .... scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.29 aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs blk: queue f7fbde14, I/O limit 4095Mb (mask 0xffffffff) scsi0:A:3:0: DV failed to configure device. Please file a bug report against this driver. (scsi0:A:3): 20.000MB/s transfers (10.000MHz, offset 15, 16bit) Vendor: BNCHMARK Model: DLT1 Rev: 391B Type: Sequential-Access ANSI SCSI revision: 02 blk: queue f7fbda14, I/O limit 4095Mb (mask 0xffffffff)