[patch] qlogic: don't use qinfo as name

[patch] qlogic: don't use qinfo as name

[Aristeu Sergio Rozanski Filho]

[-- Attachment #1: Type: text/plain, Size: 10 bytes --]

-- 
aris


[-- Attachment #2: qlogic-dont_use_qinfo.patch --]
[-- Type: text/plain, Size: 338 bytes --]

--- linux/drivers/scsi/qlogicfas.c.orig	2003-10-17 16:47:54.000000000 -0200
+++ linux/drivers/scsi/qlogicfas.c	2003-10-17 16:48:30.000000000 -0200
@@ -665,7 +665,6 @@
 	sprintf(qinfo,
 		"Qlogicfas Driver version 0.46, chip %02X at %03X, IRQ %d, TPdma:%d",
 		qltyp, qbase, qlirq, QL_TURBO_PDMA);
-	host->name = qinfo;
 
 	return hreg;
 

Re: [patch] qlogic: don't use qinfo as name

[Christoph Hellwig]

On Mon, Oct 20, 2003 at 09:22:01PM -0200, Aristeu Sergio Rozanski Filho wrote:
> hi,
> 	these are the patches modified based on comments sent by Jeff,
> Christoph and Mike.

Hi Aristeu,

do you have those  qlogicfas patches from before the freeze still around?
I just noticed they still aren't merged and without them the driver is
pretty much useless..

Re: [patch] qlogic: don't use qinfo as name

[Aristeu Sergio Rozanski Filho]

[-- Attachment #1.1: Type: text/plain, Size: 299 bytes --]

hi Christoph,
> do you have those  qlogicfas patches from before the freeze still around?
> I just noticed they still aren't merged and without them the driver is
> pretty much useless..
yes, I'm sending it attached. I didn't changed them since, so I'm not sure if
they will apply cleanly.

--
aris

[-- Attachment #1.2: qlogic-dont_use_qinfo.patch --]
[-- Type: text/plain, Size: 348 bytes --]

--- linux/drivers/scsi/qlogicfas.c.orig	2003-10-17 16:47:54.000000000 -0200
+++ linux/drivers/scsi/qlogicfas.c	2003-10-17 16:48:30.000000000 -0200
@@ -665,7 +665,6 @@
 	sprintf(qinfo,
 		"Qlogicfas Driver version 0.46, chip %02X at %03X, IRQ %d, TPdma:%d",
 		qltyp, qbase, qlirq, QL_TURBO_PDMA);
-	host->name = qinfo;
 
 	return hreg;
 

[-- Attachment #1.3: qlogic-force_can_queue.patch --]
[-- Type: text/plain, Size: 410 bytes --]

--- linux/drivers/scsi/qlogicfas.c.orig	2003-10-20 21:12:09.000000000 -0200
+++ linux/drivers/scsi/qlogicfas.c	2003-10-20 21:12:17.000000000 -0200
@@ -793,7 +793,7 @@
 	.eh_device_reset_handler= qlogicfas_device_reset,
 	.eh_host_reset_handler	= qlogicfas_host_reset,
 	.bios_param		= qlogicfas_biosparam,
-	.can_queue		= 0,
+	.can_queue		= 1,
 	.this_id		= -1,
 	.sg_tablesize		= SG_ALL,
 	.cmd_per_lun		= 1,

[-- Attachment #1.4: qlogic-kill_qluseirq.patch --]
[-- Type: text/plain, Size: 1335 bytes --]

--- linux-2.5/drivers/scsi/qlogicfas.c	2003-10-15 17:16:15.000000000 -0200
+++ build-2.5/drivers/scsi/qlogicfas.c	2003-10-17 16:44:41.000000000 -0200
@@ -48,11 +48,6 @@
 
 #define QL_INT_ACTIVE_HIGH 2
 
-/* Set the following to 1 to enable the use of interrupts.  Note that 0 tends
-   to be more stable, but slower (or ties up the system more) */
-
-#define QL_USE_IRQ 1
-
 /* Set the following to max out the speed of the PIO PseudoDMA transfers,
    again, 0 tends to be slower, but more stable.  */
 
@@ -500,8 +495,6 @@
 	return (result << 16) | (message << 8) | (status & STATUS_MASK);
 }
 
-#if QL_USE_IRQ
-
 /*
  *	Interrupt handler 
  */
@@ -541,10 +534,6 @@
 	return IRQ_HANDLED;
 }
 
-#endif
-
-#if QL_USE_IRQ
-
 /*
  *	Queued command
  */
@@ -566,12 +555,6 @@
 	ql_icmd(cmd);
 	return 0;
 }
-#else
-int qlogicfas_queuecommand(Scsi_Cmnd * cmd, void (*done) (Scsi_Cmnd *))
-{
-	return 1;
-}
-#endif
 
 #ifdef PCMCIA
 
@@ -641,7 +624,6 @@
 	REG0;
 #endif
 
-#if QL_USE_IRQ
 	/*
 	 *	IRQ probe - toggle pin and check request pending 
 	 */
@@ -670,7 +652,7 @@
 
 	if (qlirq >= 0 && !request_irq(qlirq, do_ql_ihandl, 0, "qlogicfas", NULL))
 		host->can_queue = 1;
-#endif
+
 	hreg = scsi_register(host, 0);	/* no host data */
 	if (!hreg)
 		goto err_release_mem;

[-- Attachment #1.5: qlogic-pcmcia_dont_release_region.patch --]
[-- Type: text/plain, Size: 477 bytes --]

--- linux/drivers/scsi/pcmcia/qlogic_stub.c.orig	2003-10-22 22:31:05.000000000 -0200
+++ linux/drivers/scsi/pcmcia/qlogic_stub.c	2003-10-22 22:31:36.000000000 -0200
@@ -240,9 +240,6 @@
 		outb(0x04, link->io.BasePort1 + 0xd);
 	}
 
-	/* A bad hack... */
-	release_region(link->io.BasePort1, link->io.NumPorts1);
-
 	/* The KXL-810AN has a bigger IO port window */
 	if (link->io.NumPorts1 == 32)
 		qlogicfas_preset(link->io.BasePort1 + 16, link->irq.AssignedIRQ);

[-- Attachment #1.6: qlogic-pcmcia_uses_scsi_host_alloc.patch --]
[-- Type: text/plain, Size: 829 bytes --]

--- linux/drivers/scsi/qlogicfas.c.orig	2003-10-22 22:25:19.000000000 -0200
+++ linux/drivers/scsi/qlogicfas.c	2003-10-22 21:26:59.000000000 -0200
@@ -650,7 +650,11 @@
 	} else
 		printk(KERN_INFO "Ql: Using preset IRQ %d\n", qlirq);
 
+#ifdef PCMCIA
+	hreg = scsi_host_alloc(host, 0);
+#else
 	hreg = scsi_register(host, 0);	/* no host data */
+#endif
 	if (!hreg)
 		goto err_release_mem;
 	hreg->io_port = qbase;
--- linux/drivers/scsi/pcmcia/qlogic_stub.c.orig	2003-10-20 21:04:02.000000000 -0200
+++ linux/drivers/scsi/pcmcia/qlogic_stub.c	2003-10-22 22:24:34.000000000 -0200
@@ -288,7 +288,7 @@
 	CardServices(ReleaseIO, link->handle, &link->io);
 	CardServices(ReleaseIRQ, link->handle, &link->irq);
 
-	scsi_unregister(info->host);
+	scsi_host_put(info->host);
 
 	link->state &= ~DEV_CONFIG;
 }

[-- Attachment #1.7: qlogic-request_irq_with_priv_data.patch --]
[-- Type: text/plain, Size: 929 bytes --]

--- linux/drivers/scsi/qlogicfas.c.orig	2003-10-17 16:49:30.000000000 -0200
+++ linux/drivers/scsi/qlogicfas.c	2003-10-17 16:54:06.000000000 -0200
@@ -650,9 +650,6 @@
 	} else
 		printk(KERN_INFO "Ql: Using preset IRQ %d\n", qlirq);
 
-	if (qlirq >= 0 && !request_irq(qlirq, do_ql_ihandl, 0, "qlogicfas", NULL))
-		host->can_queue = 1;
-
 	hreg = scsi_register(host, 0);	/* no host data */
 	if (!hreg)
 		goto err_release_mem;
@@ -666,12 +663,20 @@
 		"Qlogicfas Driver version 0.46, chip %02X at %03X, IRQ %d, TPdma:%d",
 		qltyp, qbase, qlirq, QL_TURBO_PDMA);
 
+	if (request_irq(qlirq, do_ql_ihandl, 0, "qlogicfas", hreg))
+		goto free_scsi_host;
+
 	return hreg;
 
+free_scsi_host:
+#ifdef PCMCIA
+	scsi_host_put(hreg);
+#else
+	scsi_unregister(hreg);
+#endif
+
 err_release_mem:
 	release_region(qbase, 0x10);
-	if (host->can_queue)
-		free_irq(qlirq, do_ql_ihandl);
 	return NULL;;
 
 }

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

Re: [patch] qlogic: don't use qinfo as name

[James Bottomley]

On Thu, 2004-02-19 at 11:26, Aristeu Sergio Rozanski Filho wrote:
> yes, I'm sending it attached. I didn't changed them since, so I'm not sure if
> they will apply cleanly.

I'll put them in, but first I think the qlogicfas attachment type needs
to be all new style.

This:

> +#ifdef PCMCIA
> +	hreg = scsi_host_alloc(host, 0);
> +#else
>  	hreg = scsi_register(host, 0);	/* no host data */
> +#endif

Mixing of new and old styles is bound to cause difficulty.

James

Re: [patch] qlogic: don't use qinfo as name

[Aristeu Sergio Rozanski Filho]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hi James,
> I'll put them in, but first I think the qlogicfas attachment type needs
> to be all new style.
> 
> This:
> 
> > +#ifdef PCMCIA
> > +	hreg = scsi_host_alloc(host, 0);
> > +#else
> >  	hreg = scsi_register(host, 0);	/* no host data */
> > +#endif
> 
> Mixing of new and old styles is bound to cause difficulty.
I'm working on that, sorry for the delay, I took last week off.

- --
aris
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (GNU/Linux)

iD8DBQFAQ+MHRRJOudsVYbMRAr9nAKCYVr/FAhiaYYscKvAkKu9g2IeFJQCgmPyx
dTWt0tZsQyFag3xBlhMSqDE=
=xsMc
-----END PGP SIGNATURE-----

[patch][0/15] qlogicfas/qlogic_cs

[Aristeu Sergio Rozanski Filho]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

James, Christoph, list,
> I'll put them in, but first I think the qlogicfas attachment type needs
> to be all new style.
please drop all patches that I've sent before and consider applying these
I'm sending instead. I wonder if will be worth to split qlogicfas in two
different modules: one for hardware functions and other for qlogicfas driver
so qlogic_cs can share the same code instead copying it. comments?

- --
aris
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (GNU/Linux)

iD8DBQFATcdhRRJOudsVYbMRAhP2AJ0fnMoNDdvUtHIghCE33Q2+pAPMpACglPcm
b5MSVpF7yNcm25ERldb8Dqg=
=h6q0
-----END PGP SIGNATURE-----

Re: [patch][0/15] qlogicfas/qlogic_cs

[Christoph Hellwig]

On Tue, Mar 09, 2004 at 10:32:17AM -0300, Aristeu Sergio Rozanski Filho wrote:
> > I'll put them in, but first I think the qlogicfas attachment type needs
> > to be all new style.
> please drop all patches that I've sent before and consider applying these
> I'm sending instead. I wonder if will be worth to split qlogicfas in two
> different modules: one for hardware functions and other for qlogicfas driver
> so qlogic_cs can share the same code instead copying it. comments?

I think that would be a good idea.