* Re: 2.6.3 CONFIG_SCSI_AIC7 X X X Kconfig bug
@ 2004-03-09 5:11 Randy.Dunlap
2004-03-11 12:46 ` Matthew Wilcox
0 siblings, 1 reply; 7+ messages in thread
From: Randy.Dunlap @ 2004-03-09 5:11 UTC (permalink / raw)
To: linux-scsi; +Cc: olh, jejb, gibbs
Olaf Hering reposted this to lkml today.
Please apply to 2.6.current.
Thanks,
~Randy
Begin forwarded message:
On Mon, Feb 09, Randy.Dunlap wrote:
This one is still not applied.
>
> product_versions: linux-262-pv
> description: make Adaptec AIC7xyx drivers depend on SCSI tristate
>
diffstat:=
drivers/scsi/aic7xxx/Kconfig.aic79xx | 2 +-
drivers/scsi/aic7xxx/Kconfig.aic7xxx | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff -Naurp ./drivers/scsi/aic7xxx/Kconfig.aic7xxx~depends ./drivers/scsi/aic7xxx/Kconfig.aic7xxx
--- ./drivers/scsi/aic7xxx/Kconfig.aic7xxx~depends 2004-02-03 19:43:42.000000000 -0800
+++ ./drivers/scsi/aic7xxx/Kconfig.aic7xxx 2004-02-09 09:04:01.000000000 -0800
@@ -4,7 +4,7 @@
#
config SCSI_AIC7XXX
tristate "Adaptec AIC7xxx Fast -> U160 support (New Driver)"
- depends on PCI || EISA
+ depends on (PCI || EISA) && SCSI
---help---
This driver supports all of Adaptec's Fast through Ultra 160 PCI
based SCSI controllers as well as the aic7770 based EISA and VLB
diff -Naurp ./drivers/scsi/aic7xxx/Kconfig.aic79xx~depends ./drivers/scsi/aic7xxx/Kconfig.aic79xx
--- ./drivers/scsi/aic7xxx/Kconfig.aic79xx~depends 2004-02-03 19:43:43.000000000 -0800
+++ ./drivers/scsi/aic7xxx/Kconfig.aic79xx 2004-02-09 09:03:52.000000000 -0800
@@ -4,7 +4,7 @@
#
config SCSI_AIC79XX
tristate "Adaptec AIC79xx U320 support"
- depends on PCI
+ depends on PCI && SCSI
help
This driver supports all of Adaptec's Ultra 320 PCI-X
based SCSI controllers.
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: 2.6.3 CONFIG_SCSI_AIC7 X X X Kconfig bug
2004-03-09 5:11 2.6.3 CONFIG_SCSI_AIC7 X X X Kconfig bug Randy.Dunlap
@ 2004-03-11 12:46 ` Matthew Wilcox
2004-03-11 12:53 ` Olaf Hering
2004-03-11 15:42 ` rddunlap
0 siblings, 2 replies; 7+ messages in thread
From: Matthew Wilcox @ 2004-03-11 12:46 UTC (permalink / raw)
To: Randy.Dunlap; +Cc: linux-scsi, olh, jejb, gibbs
On Mon, Mar 08, 2004 at 09:11:48PM -0800, Randy.Dunlap wrote:
> On Mon, Feb 09, Randy.Dunlap wrote:
> > description: make Adaptec AIC7xyx drivers depend on SCSI tristate
This is unnecessary if you apply this patch which Christoph had some
vague objections to but didn't comment on further when I asked him to
go into detail:
This patch corrects a couple of typos in drivers/scsi/Kconfig and
makes the SCSI drivers menu depend on SCSI rather than on SCSI!=n.
That has the effect of making every driver depend on SCSI, so we don't
need the explicit dependency for every driver.
Index: drivers/scsi/Kconfig
===================================================================
RCS file: /var/cvs/linux-2.6/drivers/scsi/Kconfig,v
retrieving revision 1.13
diff -u -p -r1.13 Kconfig
--- a/drivers/scsi/Kconfig 7 Feb 2004 14:02:43 -0000 1.13
+++ b/drivers/scsi/Kconfig 11 Feb 2004 19:31:44 -0000
@@ -27,10 +27,10 @@ config SCSI_PROC_FS
default y
---help---
This option enables support for the various files in
- /proc/scsi. In Linux 2.6 this has been superceeded by
+ /proc/scsi. In Linux 2.6 this has been superseded by
files in sysfs but many legacy applications rely on this.
- If unusure say Y.
+ If unsure say Y.
comment "SCSI support type (disk, tape, CD-ROM)"
depends on SCSI
@@ -198,29 +198,29 @@ config SCSI_LOGGING
menu "SCSI low-level drivers"
- depends on SCSI!=n
+ depends on SCSI
config SGIWD93_SCSI
tristate "SGI WD93C93 SCSI Driver"
- depends on SGI_IP22 && SCSI
+ depends on SGI_IP22
help
If you have a Western Digital WD93 SCSI controller on
an SGI MIPS system, say Y. Otherwise, say N.
config SCSI_DECNCR
tristate "DEC NCR53C94 Scsi Driver"
- depends on DECSTATION && TC && SCSI
+ depends on DECSTATION && TC
help
Say Y here to support the NCR53C94 SCSI controller chips on IOASIC
based TURBOchannel DECstations and TURBOchannel PMAZ-A cards.
config SCSI_DECSII
tristate "DEC SII Scsi Driver"
- depends on DECSTATION && SCSI
+ depends on DECSTATION
config BLK_DEV_3W_XXXX_RAID
tristate "3ware Hardware ATA-RAID support"
- depends on PCI && SCSI
+ depends on PCI
help
3ware is the only hardware ATA-Raid product in Linux to date.
This card is 2,4, or 8 channel master mode support only.
@@ -233,7 +233,7 @@ config BLK_DEV_3W_XXXX_RAID
config SCSI_7000FASST
tristate "7000FASST SCSI support"
- depends on ISA && SCSI
+ depends on ISA
help
This driver supports the Western Digital 7000 SCSI host adapter
family. Some information is in the source:
@@ -244,7 +244,7 @@ config SCSI_7000FASST
config SCSI_ACARD
tristate "ACARD SCSI support"
- depends on PCI && SCSI
+ depends on PCI
help
This driver supports the ACARD 870U/W SCSI host adapter.
@@ -253,7 +253,7 @@ config SCSI_ACARD
config SCSI_AHA152X
tristate "Adaptec AHA152X/2825 support"
- depends on ISA && SCSI && !64BIT
+ depends on ISA && !64BIT
---help---
This is a driver for the AHA-1510, AHA-1520, AHA-1522, and AHA-2825
SCSI host adapters. It also works for the AVA-1505, but the IRQ etc.
@@ -268,7 +268,7 @@ config SCSI_AHA152X
config SCSI_AHA1542
tristate "Adaptec AHA1542 support"
- depends on ISA && SCSI
+ depends on ISA
---help---
This is support for a SCSI host adapter. It is explained in section
3.4 of the SCSI-HOWTO, available from
@@ -282,7 +282,7 @@ config SCSI_AHA1542
config SCSI_AHA1740
tristate "Adaptec AHA1740 support"
- depends on EISA && SCSI
+ depends on EISA
---help---
This is support for a SCSI host adapter. It is explained in section
3.5 of the SCSI-HOWTO, available from
@@ -295,13 +295,13 @@ config SCSI_AHA1740
config SCSI_AACRAID
tristate "Adaptec AACRAID support (EXPERIMENTAL)"
- depends on EXPERIMENTAL && SCSI && PCI
+ depends on EXPERIMENTAL && PCI
source "drivers/scsi/aic7xxx/Kconfig.aic7xxx"
config SCSI_AIC7XXX_OLD
tristate "Adaptec AIC7xxx support (old driver)"
- depends on SCSI
+ depends on ISA || EISA || PCI
help
WARNING This driver is an older aic7xxx driver and is no longer
under active development. Adaptec, Inc. is writing a new driver to
@@ -344,7 +344,7 @@ source "drivers/scsi/aic7xxx/Kconfig.aic
# All the I2O code and drivers do not seem to be 64bit safe.
config SCSI_DPT_I2O
tristate "Adaptec I2O RAID support "
- depends on !64BIT && SCSI && BROKEN
+ depends on !64BIT && BROKEN
help
This driver supports all of Adaptec's I2O based RAID controllers as
well as the DPT SmartRaid V cards. This is an Adaptec maintained
@@ -355,7 +355,7 @@ config SCSI_DPT_I2O
config SCSI_ADVANSYS
tristate "AdvanSys SCSI support"
- depends on (ISA || EISA || PCI) && SCSI
+ depends on ISA || EISA || PCI
help
This is a driver for all SCSI host adapters manufactured by
AdvanSys. It is documented in the kernel source in
@@ -366,7 +366,7 @@ config SCSI_ADVANSYS
config SCSI_IN2000
tristate "Always IN2000 SCSI support"
- depends on ISA && SCSI
+ depends on ISA
help
This is support for an ISA bus SCSI host adapter. You'll find more
information in <file:Documentation/scsi/in2000.txt>. If it doesn't work
@@ -378,7 +378,7 @@ config SCSI_IN2000
config SCSI_MEGARAID
tristate "AMI MegaRAID support"
- depends on PCI && SCSI
+ depends on PCI
help
This driver supports the AMI MegaRAID 418, 428, 438, 466, 762, 490
and 467 SCSI host adapters.
@@ -388,7 +388,7 @@ config SCSI_MEGARAID
config SCSI_SATA
bool "Serial ATA (SATA) support"
- depends on SCSI && EXPERIMENTAL
+ depends on EXPERIMENTAL
help
This driver family supports Serial ATA host controllers
and devices.
@@ -397,7 +397,7 @@ config SCSI_SATA
config SCSI_SATA_SVW
tristate "ServerWorks Frodo / Apple K2 SATA support (EXPERIMENTAL)"
- depends on SCSI_SATA && PCI && EXPERIMENTAL
+ depends on SCSI_SATA && PCI && (X86 || PPC) && EXPERIMENTAL
help
This option enables support for Broadcom/Serverworks/Apple K2
SATA support.
@@ -406,7 +406,7 @@ config SCSI_SATA_SVW
config SCSI_ATA_PIIX
tristate "Intel PIIX/ICH SATA support"
- depends on SCSI_SATA && PCI
+ depends on SCSI_SATA && PCI && X86
help
This option enables support for ICH5 Serial ATA.
If PATA support was enabled previously, this enables
@@ -440,7 +440,7 @@ config SCSI_SATA_VIA
config SCSI_BUSLOGIC
tristate "BusLogic SCSI support"
- depends on (PCI || ISA || MCA) && SCSI
+ depends on PCI || ISA || MCA
---help---
This is support for BusLogic MultiMaster and FlashPoint SCSI Host
Adapters. Consult the SCSI-HOWTO, available from
@@ -464,14 +464,14 @@ config SCSI_OMIT_FLASHPOINT
config SCSI_CPQFCTS
tristate "Compaq Fibre Channel 64-bit/66Mhz HBA support"
- depends on PCI && SCSI
+ depends on PCI
help
Say Y here to compile in support for the Compaq StorageWorks Fibre
Channel 64-bit/66Mhz Host Bus Adapter.
config SCSI_DMX3191D
tristate "DMX3191D SCSI support"
- depends on PCI && SCSI
+ depends on PCI
help
This is support for Domex DMX3191D SCSI Host Adapters.
@@ -480,7 +480,7 @@ config SCSI_DMX3191D
config SCSI_DTC3280
tristate "DTC3180/3280 SCSI support"
- depends on ISA && SCSI
+ depends on ISA
help
This is support for DTC 3180/3280 SCSI Host Adapters. Please read
the SCSI-HOWTO, available from
@@ -492,7 +492,7 @@ config SCSI_DTC3280
config SCSI_EATA
tristate "EATA ISA/EISA/PCI (DPT and generic EATA/DMA-compliant boards) support"
- depends on (ISA || EISA || PCI) && SCSI
+ depends on ISA || EISA || PCI
---help---
This driver supports all EATA/DMA-compliant SCSI host adapters. DPT
ISA and all EISA I/O addresses are probed looking for the "EATA"
@@ -540,7 +540,7 @@ config SCSI_EATA_MAX_TAGS
config SCSI_EATA_PIO
tristate "EATA-PIO (old DPT PM2001, PM2012A) support"
- depends on SCSI
+ depends on ISA || EISA || PCI
---help---
This driver supports all EATA-PIO protocol compliant SCSI Host
Adapters like the DPT PM2001 and the PM2012A. EATA-DMA compliant
@@ -554,7 +554,7 @@ config SCSI_EATA_PIO
config SCSI_FUTURE_DOMAIN
tristate "Future Domain 16xx SCSI/AHA-2920A support"
- depends on (ISA || PCI) && SCSI
+ depends on ISA || PCI
---help---
This is support for Future Domain's 16-bit SCSI host adapters
(TMC-1660/1680, TMC-1650/1670, TMC-3260, TMC-1610M/MER/MEX) and
@@ -573,7 +573,7 @@ config SCSI_FUTURE_DOMAIN
config SCSI_FD_MCS
tristate "Future Domain MCS-600/700 SCSI support"
- depends on MCA && SCSI
+ depends on MCA
---help---
This is support for Future Domain MCS 600/700 MCA SCSI adapters.
Some PS/2 computers are equipped with IBM Fast SCSI Adapter/A which
@@ -586,7 +586,7 @@ config SCSI_FD_MCS
config SCSI_GDTH
tristate "Intel/ICP (former GDT SCSI Disk Array) RAID Controller support"
- depends on (ISA || EISA || PCI) && SCSI
+ depends on ISA || EISA || PCI
---help---
Formerly called GDT SCSI Disk Array Controller Support.
@@ -600,7 +600,7 @@ config SCSI_GDTH
config SCSI_GENERIC_NCR5380
tristate "Generic NCR5380/53c400 SCSI PIO support"
- depends on ISA && SCSI
+ depends on ISA
---help---
This is a driver for the old NCR 53c80 series of SCSI controllers
on boards using PIO. Most boards such as the Trantor T130 fit this
@@ -619,7 +619,7 @@ config SCSI_GENERIC_NCR5380
config SCSI_GENERIC_NCR5380_MMIO
tristate "Generic NCR5380/53c400 SCSI MMIO support"
- depends on ISA && SCSI
+ depends on ISA
---help---
This is a driver for the old NCR 53c80 series of SCSI controllers
on boards using memory mapped I/O.
@@ -644,7 +644,7 @@ config SCSI_GENERIC_NCR53C400
config SCSI_IBMMCA
tristate "IBMMCA SCSI support"
- depends on MCA && SCSI
+ depends on MCA
---help---
This is support for the IBM SCSI adapter found in many of the PS/2
series computers. These machines have an MCA bus, so you need to
@@ -714,7 +714,7 @@ config IBMMCA_SCSI_DEV_RESET
config SCSI_IPS
tristate "IBM ServeRAID support"
- depends on PCI && SCSI
+ depends on PCI
---help---
This is support for the IBM ServeRAID hardware RAID controllers.
See <http://www.developer.ibm.com/welcome/netfinity/serveraid.html>
@@ -727,7 +727,7 @@ config SCSI_IPS
config SCSI_INITIO
tristate "Initio 9100U(W) support"
- depends on PCI && SCSI && BROKEN
+ depends on PCI && BROKEN
help
This is support for the Initio 91XXU(W) SCSI host adapter. Please
read the SCSI-HOWTO, available from
@@ -738,7 +738,7 @@ config SCSI_INITIO
config SCSI_INIA100
tristate "Initio INI-A100U2W support"
- depends on PCI && SCSI
+ depends on PCI
help
This is support for the Initio INI-A100U2W SCSI host adapter.
Please read the SCSI-HOWTO, available from
@@ -749,7 +749,7 @@ config SCSI_INIA100
config SCSI_PPA
tristate "IOMEGA parallel port (ppa - older drives)"
- depends on SCSI && PARPORT
+ depends on PARPORT
---help---
This driver supports older versions of IOMEGA's parallel port ZIP
drive (a 100 MB removable media device).
@@ -776,7 +776,7 @@ config SCSI_PPA
config SCSI_IMM
tristate "IOMEGA parallel port (imm - newer drives)"
- depends on SCSI && PARPORT
+ depends on PARPORT
---help---
This driver supports newer versions of IOMEGA's parallel port ZIP
drive (a 100 MB removable media device).
@@ -832,7 +832,7 @@ config SCSI_IZIP_SLOW_CTR
config SCSI_NCR53C406A
tristate "NCR53c406a SCSI support"
- depends on ISA && SCSI
+ depends on ISA
help
This is support for the NCR53c406a SCSI host adapter. For user
configurable parameters, check out <file:drivers/scsi/NCR53c406a.c>
@@ -844,7 +844,7 @@ config SCSI_NCR53C406A
config SCSI_NCR_D700
tristate "NCR Dual 700 MCA SCSI support"
- depends on MCA && SCSI
+ depends on MCA
help
This is a driver for the MicroChannel Dual 700 card produced by
NCR and commonly used in 345x/35xx/4100 class machines. It always
@@ -860,7 +860,7 @@ config 53C700_IO_MAPPED
config SCSI_LASI700
tristate "HP Lasi SCSI support for 53c700/710"
- depends on GSC && SCSI
+ depends on GSC
help
This is a driver for the SCSI controller in the Lasi chip found in
many PA-RISC workstations & servers. If you do not know whether you
@@ -878,7 +878,7 @@ config 53C700_LE_ON_BE
config SCSI_SYM53C8XX_2
tristate "SYM53C8XX Version 2 SCSI support"
- depends on PCI && SCSI
+ depends on PCI
---help---
This driver supports the whole NCR53C8XX/SYM53C8XX family of
PCI-SCSI controllers. It also supports the subset of LSI53C10XX
@@ -943,7 +943,7 @@ config SCSI_SYM53C8XX_IOMAPPED
config SCSI_ZALON
tristate "Zalon SCSI support"
- depends on GSC && SCSI
+ depends on GSC
help
The Zalon is a GSC/HSC bus interface chip that sits between the
PA-RISC processor and the NCR 53c720 SCSI controller on C100,
@@ -953,7 +953,7 @@ config SCSI_ZALON
config SCSI_NCR_Q720
tristate "NCR Quad 720 MCA SCSI support"
- depends on MCA && SCSI
+ depends on MCA
help
This is a driver for the MicroChannel Quad 720 card produced by
NCR and commonly used in 345x/35xx/4100 class machines. It always
@@ -1062,7 +1062,7 @@ config SCSI_NCR53C8XX_NO_DISCONNECT
config SCSI_MCA_53C9X
tristate "NCR MCA 53C9x SCSI support"
- depends on MCA && SCSI && BROKEN_ON_SMP
+ depends on MCA && BROKEN_ON_SMP
help
Some MicroChannel machines, notably the NCR 35xx line, use a SCSI
controller based on the NCR 53C94. This driver will allow use of
@@ -1073,7 +1073,7 @@ config SCSI_MCA_53C9X
config SCSI_PAS16
tristate "PAS16 SCSI support"
- depends on ISA && SCSI
+ depends on ISA
---help---
This is support for a SCSI host adapter. It is explained in section
3.10 of the SCSI-HOWTO, available from
@@ -1086,7 +1086,7 @@ config SCSI_PAS16
config SCSI_PCI2000
tristate "PCI2000 support"
- depends on PCI && SCSI && BROKEN
+ depends on PCI && BROKEN
help
This is support for the PCI2000I EIDE interface card which acts as a
SCSI host adapter. Please read the SCSI-HOWTO, available from
@@ -1097,7 +1097,7 @@ config SCSI_PCI2000
config SCSI_PCI2220I
tristate "PCI2220i support"
- depends on PCI && SCSI && BROKEN
+ depends on PCI && BROKEN
help
This is support for the PCI2220i EIDE interface card which acts as a
SCSI host adapter. Please read the SCSI-HOWTO, available from
@@ -1108,7 +1108,7 @@ config SCSI_PCI2220I
config SCSI_PSI240I
tristate "PSI240i support"
- depends on ISA && SCSI
+ depends on ISA
help
This is support for the PSI240i EIDE interface card which acts as a
SCSI host adapter. Please read the SCSI-HOWTO, available from
@@ -1119,7 +1119,7 @@ config SCSI_PSI240I
config SCSI_QLOGIC_FAS
tristate "Qlogic FAS SCSI support"
- depends on ISA && SCSI
+ depends on ISA || PCMCIA
---help---
This is a driver for the ISA, VLB, and PCMCIA versions of the Qlogic
FastSCSI! cards as well as any other card based on the FASXX chip
@@ -1139,7 +1139,7 @@ config SCSI_QLOGIC_FAS
config SCSI_QLOGIC_ISP
tristate "Qlogic ISP SCSI support"
- depends on PCI && SCSI
+ depends on PCI
---help---
This driver works for all QLogic PCI SCSI host adapters (IQ-PCI,
IQ-PCI-10, IQ_PCI-D) except for the PCI-basic card. (This latter
@@ -1157,7 +1157,7 @@ config SCSI_QLOGIC_ISP
config SCSI_QLOGIC_1280
tristate "Qlogic QLA 1280 SCSI support"
- depends on PCI && SCSI
+ depends on PCI
help
Say Y if you have a QLogic ISP1x80/1x160 SCSI host adapter.
@@ -1166,7 +1166,7 @@ config SCSI_QLOGIC_1280
config SCSI_QLOGICPTI
tristate "PTI Qlogic, ISP Driver"
- depends on SBUS && SCSI
+ depends on SBUS
help
This driver supports SBUS SCSI controllers from PTI or QLogic. These
controllers are known under Solaris as qpti and in the openprom as
@@ -1180,7 +1180,7 @@ source "drivers/scsi/qla2xxx/Kconfig"
config SCSI_SEAGATE
tristate "Seagate ST-02 and Future Domain TMC-8xx SCSI support"
- depends on X86 && ISA && SCSI && BROKEN
+ depends on X86 && ISA && BROKEN
---help---
These are 8-bit SCSI controllers; the ST-01 is also supported by
this driver. It is explained in section 3.9 of the SCSI-HOWTO,
@@ -1194,7 +1194,7 @@ config SCSI_SEAGATE
# definitely looks not 64bit safe:
config SCSI_SIM710
tristate "Simple 53c710 SCSI support (Compaq, NCR machines)"
- depends on (EISA || MCA) && SCSI
+ depends on EISA || MCA
---help---
This driver for NCR53c710 based SCSI host adapters.
@@ -1207,7 +1207,7 @@ config 53C700_IO_MAPPED
config SCSI_SYM53C416
tristate "Symbios 53c416 SCSI support"
- depends on ISA && SCSI
+ depends on ISA
---help---
This is support for the sym53c416 SCSI host adapter, the SCSI
adapter that comes with some HP scanners. This driver requires that
@@ -1225,7 +1225,7 @@ config SCSI_SYM53C416
config SCSI_DC395x
tristate "Tekram DC395(U/UW/F) and DC315(U) SCSI support (EXPERIMENTAL)"
- depends on PCI && SCSI && EXPERIMENTAL
+ depends on PCI && EXPERIMENTAL
---help---
This driver supports PCI SCSI host adapters based on the ASIC
TRM-S1040 chip, e.g Tekram DC395(U/UW/F) and DC315(U) variants.
@@ -1240,7 +1240,7 @@ config SCSI_DC395x
config SCSI_DC390T
tristate "Tekram DC390(T) and Am53/79C974 SCSI support"
- depends on PCI && SCSI
+ depends on PCI
---help---
This driver supports PCI SCSI host adapters based on the Am53C974A
chip, e.g. Tekram DC390(T), DawiControl 2974 and some onboard
@@ -1275,7 +1275,7 @@ config SCSI_DC390T_NOGENSUPP
config SCSI_T128
tristate "Trantor T128/T128F/T228 SCSI support"
- depends on ISA && SCSI
+ depends on ISA
---help---
This is support for a SCSI host adapter. It is explained in section
3.11 of the SCSI-HOWTO, available from
@@ -1290,7 +1290,7 @@ config SCSI_T128
config SCSI_U14_34F
tristate "UltraStor 14F/34F support"
- depends on ISA && SCSI
+ depends on ISA
---help---
This is support for the UltraStor 14F and 34F SCSI-2 host adapters.
The source at <file:drivers/scsi/u14-34f.c> contains some
@@ -1339,7 +1339,7 @@ config SCSI_U14_34F_MAX_TAGS
config SCSI_ULTRASTOR
tristate "UltraStor SCSI support"
- depends on X86 && ISA && SCSI
+ depends on X86 && ISA
---help---
This is support for the UltraStor 14F, 24F and 34F SCSI-2 host
adapter family. This driver is explained in section 3.12 of the
@@ -1356,7 +1356,7 @@ config SCSI_ULTRASTOR
config SCSI_NSP32
tristate "Workbit NinjaSCSI-32Bi/UDE support"
- depends on PCI && SCSI && !64BIT
+ depends on PCI
help
This is support for the Workbit NinjaSCSI-32Bi/UDE PCI/Cardbus
SCSI host adapter. Please read the SCSI-HOWTO, available from
@@ -1367,7 +1367,6 @@ config SCSI_NSP32
config SCSI_DEBUG
tristate "SCSI debugging host simulator"
- depends on SCSI
help
This is a host adapter simulator that can simulate multiple hosts
each with multiple dummy SCSI devices (disks). It defaults to one
@@ -1380,7 +1379,7 @@ config SCSI_DEBUG
config SCSI_MESH
tristate "MESH (Power Mac internal SCSI) support"
- depends on PPC_PMAC && SCSI
+ depends on PPC_PMAC
help
Many Power Macintoshes and clones have a MESH (Macintosh Enhanced
SCSI Hardware) SCSI bus adaptor (the 7200 doesn't, but all of the
@@ -1411,7 +1410,7 @@ config SCSI_MESH_RESET_DELAY_MS
config SCSI_MAC53C94
tristate "53C94 (Power Mac external SCSI) support"
- depends on PPC_PMAC && SCSI
+ depends on PPC_PMAC
help
On Power Macintoshes (and clones) with two SCSI buses, the external
SCSI bus is usually controlled by a 53C94 SCSI bus adaptor. Older
@@ -1425,7 +1424,7 @@ source "drivers/scsi/arm/Kconfig"
config JAZZ_ESP
bool "MIPS JAZZ FAS216 SCSI support"
- depends on MIPS_JAZZ && SCSI
+ depends on MIPS_JAZZ
help
This is the driver for the onboard SCSI host adapter of MIPS Magnum
4000, Acer PICA, Olivetti M700-10 and a few other identical OEM
@@ -1433,7 +1432,7 @@ config JAZZ_ESP
config A3000_SCSI
tristate "A3000 WD33C93A support"
- depends on AMIGA && SCSI
+ depends on AMIGA
help
If you have an Amiga 3000 and have SCSI devices connected to the
built-in SCSI controller, say Y. Otherwise, say N.
@@ -1443,7 +1442,7 @@ config A3000_SCSI
config A2091_SCSI
tristate "A2091/A590 WD33C93A support"
- depends on ZORRO && SCSI
+ depends on ZORRO
help
If you have a Commodore A2091 SCSI controller, say Y. Otherwise,
say N.
@@ -1453,7 +1452,7 @@ config A2091_SCSI
config GVP11_SCSI
tristate "GVP Series II WD33C93A support"
- depends on ZORRO && SCSI
+ depends on ZORRO
---help---
If you have a Great Valley Products Series II SCSI controller,
answer Y. Also say Y if you have a later model of GVP SCSI
@@ -1466,7 +1465,7 @@ config GVP11_SCSI
config CYBERSTORM_SCSI
tristate "CyberStorm SCSI support"
- depends on ZORRO && SCSI
+ depends on ZORRO
help
If you have an Amiga with an original (MkI) Phase5 Cyberstorm
accelerator board and the optional Cyberstorm SCSI controller,
@@ -1474,7 +1473,7 @@ config CYBERSTORM_SCSI
config CYBERSTORMII_SCSI
tristate "CyberStorm Mk II SCSI support"
- depends on ZORRO && SCSI
+ depends on ZORRO
help
If you have an Amiga with a Phase5 Cyberstorm MkII accelerator board
and the optional Cyberstorm SCSI controller, say Y. Otherwise,
@@ -1482,7 +1481,7 @@ config CYBERSTORMII_SCSI
config BLZ2060_SCSI
tristate "Blizzard 2060 SCSI support"
- depends on ZORRO && SCSI
+ depends on ZORRO
help
If you have an Amiga with a Phase5 Blizzard 2060 accelerator board
and want to use the onboard SCSI controller, say Y. Otherwise,
@@ -1490,7 +1489,7 @@ config BLZ2060_SCSI
config BLZ1230_SCSI
tristate "Blizzard 1230IV/1260 SCSI support"
- depends on ZORRO && SCSI
+ depends on ZORRO
help
If you have an Amiga 1200 with a Phase5 Blizzard 1230IV or Blizzard
1260 accelerator, and the optional SCSI module, say Y. Otherwise,
@@ -1498,14 +1497,14 @@ config BLZ1230_SCSI
config FASTLANE_SCSI
tristate "Fastlane SCSI support"
- depends on ZORRO && SCSI
+ depends on ZORRO
help
If you have the Phase5 Fastlane Z3 SCSI controller, or plan to use
one in the near future, say Y to this question. Otherwise, say N.
config SCSI_AMIGA7XX
bool "Amiga NCR53c710 SCSI support (EXPERIMENTAL)"
- depends on AMIGA && SCSI && EXPERIMENTAL && BROKEN
+ depends on AMIGA && EXPERIMENTAL && BROKEN
help
Support for various NCR53c710-based SCSI controllers on the Amiga.
This includes:
@@ -1524,7 +1523,7 @@ config SCSI_AMIGA7XX
config OKTAGON_SCSI
tristate "BSC Oktagon SCSI support (EXPERIMENTAL)"
- depends on ZORRO && SCSI && EXPERIMENTAL
+ depends on ZORRO && EXPERIMENTAL
help
If you have the BSC Oktagon SCSI disk controller for the Amiga, say
Y to this question. If you're in doubt about whether you have one,
@@ -1533,7 +1532,7 @@ config OKTAGON_SCSI
config ATARI_SCSI
tristate "Atari native SCSI support"
- depends on ATARI && SCSI && BROKEN
+ depends on ATARI && BROKEN
---help---
If you have an Atari with built-in NCR5380 SCSI controller (TT,
Falcon, ...) say Y to get it supported. Of course also, if you have
@@ -1574,7 +1573,7 @@ config TT_DMA_EMUL
config MAC_SCSI
bool "Macintosh NCR5380 SCSI"
- depends on MAC && SCSI
+ depends on MAC
help
This is the NCR 5380 SCSI controller included on most of the 68030
based Macintoshes. If you have one of these say Y and read the
@@ -1583,7 +1582,7 @@ config MAC_SCSI
config SCSI_MAC_ESP
tristate "Macintosh NCR53c9[46] SCSI"
- depends on MAC && SCSI
+ depends on MAC
help
This is the NCR 53c9x SCSI controller found on most of the 68040
based Macintoshes. If you have one of these say Y and read the
@@ -1595,14 +1594,14 @@ config SCSI_MAC_ESP
config MVME147_SCSI
bool "WD33C93 SCSI driver for MVME147"
- depends on MVME147 && SCSI
+ depends on MVME147
help
Support for the on-board SCSI controller on the Motorola MVME147
single-board computer.
config MVME16x_SCSI
bool "NCR53C710 SCSI driver for MVME16x"
- depends on MVME16x && SCSI && BROKEN
+ depends on MVME16x && BROKEN
help
The Motorola MVME162, 166, 167, 172 and 177 boards use the NCR53C710
SCSI controller chip. Almost everyone using one of these boards
@@ -1610,7 +1609,7 @@ config MVME16x_SCSI
config BVME6000_SCSI
bool "NCR53C710 SCSI driver for BVME6000"
- depends on BVME6000 && SCSI && BROKEN
+ depends on BVME6000 && BROKEN
help
The BVME4000 and BVME6000 boards from BVM Ltd use the NCR53C710
SCSI controller chip. Almost everyone using one of these boards
@@ -1626,7 +1625,7 @@ config SCSI_NCR53C7xx_FAST
config SUN3_SCSI
tristate "Sun3 NCR5380 SCSI"
- depends on SUN3 && SCSI
+ depends on SUN3
help
This option will enable support for the OBIO (onboard io) NCR5380
SCSI controller found in the Sun 3/50 and 3/60, as well as for
@@ -1636,14 +1635,14 @@ config SUN3_SCSI
config SUN3X_ESP
bool "Sun3x ESP SCSI"
- depends on SUN3X && SCSI
+ depends on SUN3X
help
The ESP was an on-board SCSI controller used on Sun 3/80
machines. Say Y here to compile in support for it.
config SCSI_SUNESP
tristate "Sparc ESP Scsi Driver"
- depends on SBUS && SCSI
+ depends on SBUS
help
This is the driver for the Sun ESP SCSI host adapter. The ESP
chipset is present in most SPARC SBUS-based computers.
@@ -1653,7 +1652,7 @@ config SCSI_SUNESP
config SCSI_PC980155
tristate "NEC PC-9801-55 SCSI support"
- depends on X86_PC9800 && SCSI
+ depends on X86_PC9800
help
If you have the NEC PC-9801-55 SCSI interface card or compatibles
for NEC PC-9801/PC-9821, say Y.
@@ -1667,7 +1666,7 @@ config WD33C93_PIO
config ZFCP
tristate "IBM z900 OpenFCP/SCSI support"
- depends on ARCH_S390 && SCSI
+ depends on ARCH_S390
endmenu
Index: drivers/scsi/pcmcia/Kconfig
===================================================================
RCS file: /var/cvs/linux-2.6/drivers/scsi/pcmcia/Kconfig,v
retrieving revision 1.5
diff -u -p -r1.5 Kconfig
--- a/drivers/scsi/pcmcia/Kconfig 7 Jan 2004 21:30:32 -0000 1.5
+++ b/drivers/scsi/pcmcia/Kconfig 11 Feb 2004 19:31:44 -0000
@@ -3,7 +3,7 @@
#
menu "PCMCIA SCSI adapter support"
- depends on SCSI!=n && PCMCIA!=n && MODULES
+ depends on SCSI && PCMCIA && MODULES
config PCMCIA_AHA152X
tristate "Adaptec AHA152X PCMCIA support"
--
"Next the statesmen will invent cheap lies, putting the blame upon
the nation that is attacked, and every man will be glad of those
conscience-soothing falsities, and will diligently study them, and refuse
to examine any refutations of them; and thus he will by and by convince
himself that the war is just, and will thank God for the better sleep
he enjoys after this process of grotesque self-deception." -- Mark Twain
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: 2.6.3 CONFIG_SCSI_AIC7 X X X Kconfig bug
2004-03-11 12:46 ` Matthew Wilcox
@ 2004-03-11 12:53 ` Olaf Hering
2004-03-11 13:10 ` Matthew Wilcox
2004-03-11 15:42 ` rddunlap
1 sibling, 1 reply; 7+ messages in thread
From: Olaf Hering @ 2004-03-11 12:53 UTC (permalink / raw)
To: Matthew Wilcox; +Cc: Randy.Dunlap, linux-scsi, jejb, gibbs
On Thu, Mar 11, Matthew Wilcox wrote:
>
> config SCSI_SATA
> bool "Serial ATA (SATA) support"
> - depends on SCSI && EXPERIMENTAL
> + depends on EXPERIMENTAL
> help
> This driver family supports Serial ATA host controllers
> and devices.
> @@ -397,7 +397,7 @@ config SCSI_SATA
>
> config SCSI_SATA_SVW
> tristate "ServerWorks Frodo / Apple K2 SATA support (EXPERIMENTAL)"
> - depends on SCSI_SATA && PCI && EXPERIMENTAL
> + depends on SCSI_SATA && PCI && (X86 || PPC) && EXPERIMENTAL
how do you handle the SCSI=m here? sata remains =y. I havent tried to
load scsi_mod and sd_mod, is SCSI=m supposed to work for SATA?
--
USB is for mice, FireWire is for men!
sUse lINUX ag, nÜRNBERG
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: 2.6.3 CONFIG_SCSI_AIC7 X X X Kconfig bug
2004-03-11 12:53 ` Olaf Hering
@ 2004-03-11 13:10 ` Matthew Wilcox
2004-03-11 13:18 ` Olaf Hering
0 siblings, 1 reply; 7+ messages in thread
From: Matthew Wilcox @ 2004-03-11 13:10 UTC (permalink / raw)
To: Olaf Hering; +Cc: Matthew Wilcox, Randy.Dunlap, linux-scsi, jejb, gibbs
On Thu, Mar 11, 2004 at 01:53:33PM +0100, Olaf Hering wrote:
> On Thu, Mar 11, Matthew Wilcox wrote:
>
> >
> > config SCSI_SATA
> > bool "Serial ATA (SATA) support"
> > - depends on SCSI && EXPERIMENTAL
> > + depends on EXPERIMENTAL
> > help
> > This driver family supports Serial ATA host controllers
> > and devices.
> > @@ -397,7 +397,7 @@ config SCSI_SATA
> >
> > config SCSI_SATA_SVW
> > tristate "ServerWorks Frodo / Apple K2 SATA support (EXPERIMENTAL)"
> > - depends on SCSI_SATA && PCI && EXPERIMENTAL
> > + depends on SCSI_SATA && PCI && (X86 || PPC) && EXPERIMENTAL
>
> how do you handle the SCSI=m here? sata remains =y. I havent tried to
> load scsi_mod and sd_mod, is SCSI=m supposed to work for SATA?
Putting the 'depends on SCSI' attribute on the menu means it applies to
every item in the menu. So if SCSI=m, SCSI_SATA would also be constrained
to 'm' or 'n'.
--
"Next the statesmen will invent cheap lies, putting the blame upon
the nation that is attacked, and every man will be glad of those
conscience-soothing falsities, and will diligently study them, and refuse
to examine any refutations of them; and thus he will by and by convince
himself that the war is just, and will thank God for the better sleep
he enjoys after this process of grotesque self-deception." -- Mark Twain
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: 2.6.3 CONFIG_SCSI_AIC7 X X X Kconfig bug
2004-03-11 13:10 ` Matthew Wilcox
@ 2004-03-11 13:18 ` Olaf Hering
2004-03-11 13:32 ` Matthew Wilcox
0 siblings, 1 reply; 7+ messages in thread
From: Olaf Hering @ 2004-03-11 13:18 UTC (permalink / raw)
To: Matthew Wilcox; +Cc: Randy.Dunlap, linux-scsi, jejb, gibbs
On Thu, Mar 11, Matthew Wilcox wrote:
> On Thu, Mar 11, 2004 at 01:53:33PM +0100, Olaf Hering wrote:
> > On Thu, Mar 11, Matthew Wilcox wrote:
> >
> > >
> > > config SCSI_SATA
> > > bool "Serial ATA (SATA) support"
> > > - depends on SCSI && EXPERIMENTAL
> > > + depends on EXPERIMENTAL
> > > help
> > > This driver family supports Serial ATA host controllers
> > > and devices.
> > > @@ -397,7 +397,7 @@ config SCSI_SATA
> > >
> > > config SCSI_SATA_SVW
> > > tristate "ServerWorks Frodo / Apple K2 SATA support (EXPERIMENTAL)"
> > > - depends on SCSI_SATA && PCI && EXPERIMENTAL
> > > + depends on SCSI_SATA && PCI && (X86 || PPC) && EXPERIMENTAL
> >
> > how do you handle the SCSI=m here? sata remains =y. I havent tried to
> > load scsi_mod and sd_mod, is SCSI=m supposed to work for SATA?
>
> Putting the 'depends on SCSI' attribute on the menu means it applies to
> every item in the menu. So if SCSI=m, SCSI_SATA would also be constrained
> to 'm' or 'n'.
even with 'bool' instead ot 'tristate'?
--
USB is for mice, FireWire is for men!
sUse lINUX ag, nÜRNBERG
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: 2.6.3 CONFIG_SCSI_AIC7 X X X Kconfig bug
2004-03-11 13:18 ` Olaf Hering
@ 2004-03-11 13:32 ` Matthew Wilcox
0 siblings, 0 replies; 7+ messages in thread
From: Matthew Wilcox @ 2004-03-11 13:32 UTC (permalink / raw)
To: Olaf Hering; +Cc: Matthew Wilcox, Randy.Dunlap, linux-scsi, jejb, gibbs
On Thu, Mar 11, 2004 at 02:18:11PM +0100, Olaf Hering wrote:
> On Thu, Mar 11, Matthew Wilcox wrote:
> > On Thu, Mar 11, 2004 at 01:53:33PM +0100, Olaf Hering wrote:
> > > On Thu, Mar 11, Matthew Wilcox wrote:
> > > > config SCSI_SATA
> > > > bool "Serial ATA (SATA) support"
> > > > - depends on SCSI && EXPERIMENTAL
> > > > + depends on EXPERIMENTAL
> > > > config SCSI_SATA_SVW
> > > > tristate "ServerWorks Frodo / Apple K2 SATA support (EXPERIMENTAL)"
> > > > - depends on SCSI_SATA && PCI && EXPERIMENTAL
> > > > + depends on SCSI_SATA && PCI && (X86 || PPC) && EXPERIMENTAL
> > >
> > > how do you handle the SCSI=m here? sata remains =y. I havent tried to
> > > load scsi_mod and sd_mod, is SCSI=m supposed to work for SATA?
> >
> > Putting the 'depends on SCSI' attribute on the menu means it applies to
> > every item in the menu. So if SCSI=m, SCSI_SATA would also be constrained
> > to 'm' or 'n'.
>
> even with 'bool' instead ot 'tristate'?
Oh, good point. Actually, I think this patch fixes a bug in the current
Kconfiggery. Right now (and I just confirmed this):
SCSI=m
SCSI_SATA=y
SCSI_SATA_SVW can be Y/N/M
With my patch, SCSI_SATA_SVW inherits a dependency on SCSI as well as
SCSI_SATA and is thus constrained to be M/N (which would be correct).
--
"Next the statesmen will invent cheap lies, putting the blame upon
the nation that is attacked, and every man will be glad of those
conscience-soothing falsities, and will diligently study them, and refuse
to examine any refutations of them; and thus he will by and by convince
himself that the war is just, and will thank God for the better sleep
he enjoys after this process of grotesque self-deception." -- Mark Twain
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: 2.6.3 CONFIG_SCSI_AIC7 X X X Kconfig bug
2004-03-11 12:46 ` Matthew Wilcox
2004-03-11 12:53 ` Olaf Hering
@ 2004-03-11 15:42 ` rddunlap
1 sibling, 0 replies; 7+ messages in thread
From: rddunlap @ 2004-03-11 15:42 UTC (permalink / raw)
To: Matthew Wilcox; +Cc: linux-scsi, olh, james.bottomley, gibbs
On Thu, 11 Mar 2004 12:46:46 +0000 Matthew Wilcox wrote:
| On Mon, Mar 08, 2004 at 09:11:48PM -0800, Randy.Dunlap wrote:
| > On Mon, Feb 09, Randy.Dunlap wrote:
| > > description: make Adaptec AIC7xyx drivers depend on SCSI tristate
|
| This is unnecessary if you apply this patch which Christoph had some
| vague objections to but didn't comment on further when I asked him to
| go into detail:
|
|
|
| This patch corrects a couple of typos in drivers/scsi/Kconfig and
| makes the SCSI drivers menu depend on SCSI rather than on SCSI!=n.
| That has the effect of making every driver depend on SCSI, so we don't
| need the explicit dependency for every driver.
Good. James, please apply Willy's patch.
Christoph ??
--
~Randy
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2004-03-11 15:44 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-03-09 5:11 2.6.3 CONFIG_SCSI_AIC7 X X X Kconfig bug Randy.Dunlap
2004-03-11 12:46 ` Matthew Wilcox
2004-03-11 12:53 ` Olaf Hering
2004-03-11 13:10 ` Matthew Wilcox
2004-03-11 13:18 ` Olaf Hering
2004-03-11 13:32 ` Matthew Wilcox
2004-03-11 15:42 ` rddunlap
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox