From: Jan-Frode Myklebust <janfrode@parallab.uib.no>
To: linux-kernel@vger.kernel.org, linux-scsi@vger.kernel.org
Subject: LSI Logic FC HBA / mptscsih hang
Date: Wed, 14 Apr 2004 22:30:02 +0200 [thread overview]
Message-ID: <20040414203000.GA21276@ii.uib.no> (raw)
I just got a LSI Logic LSI7102XP-LC Single 2Gb/s Fibre Channel HBA,
and installed it in a IBM x330 (Dual Pentium III). Booting the redhat
kernel-2.4.21-4.EL and kernel-2.4.21-9.0.1.EL works fine, but the
smp-versions of the same kernels (kernel-smp-2.4.21-4.EL and
kernel-smp-2.4.21-9.0.1.EL) hangs every time after:
Loading mptbase.Fusion MPT base driver 2.05.05+
o module
Copyright (c) 1999-2002 LSI Logic Corporation
PCI: Enabling device 01:05.0 (0000 -> 0003)
mptbase: Initiating ioc0 bringup
ioc0: FC919X: Capabilities={Initiator,Target,LAN}
mptbase: Initiating ioc0 recovery
mptbase: Initiating ioc0 recovery
mptbase: Initiating ioc0 recovery
mptbase: 1 MPT adapter found, 1 installed.
Loading mptscsihFusion MPT SCSI Host driver 2.05.05+
.o module
scsi1 : ioc0: LSIFC919X, FwRev=01000000h, Ports=1, MaxQ=1023, IRQ=11
Starting timer : 0 0
blk: queue f752d618, I/O limit 4294967295Mb (mask 0xffffffffffffffff)
scsi : aborting command due to timeout : pid 25, scsi1, channel 0, id
0, lun 0 Inquiry 00 00 00 ff 00
mptscsih: OldAbort scheduling ABORT SCSI IO (sc=f752d400)
IOs outstanding = 1
mptscsih: Attempting ABORT SCSI IO! (mf=f74e0100:sc=f752d400)
SCSI host 1 abort (pid 25) timed out - resetting
SCSI bus is being reset for host 1 channel 0.
mptscsih: OldReset scheduling BUS_RESET (sc=f752d400)
IOs outstanding = 1
SCSI host 1 channel 0 reset (pid 25) timed out - trying harder
SCSI bus is being reset for host 1 channel 0.
mptscsih: OldReset scheduling BUS_RESET (sc=f752d400)
IOs outstanding = 1
SCSI host 1 reset (pid 25) timed out again -
probably an unrecoverable SCSI bus or device hang.
mptbase: Initiating ioc0 recovery
SCSI host 1 reset (pid 26) timed out again -
probably an unrecoverable SCSI bus or device hang.
[hangs forever..]
Any advice?
-jf
next reply other threads:[~2004-04-14 20:30 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-04-14 20:30 Jan-Frode Myklebust [this message]
-- strict thread matches above, loose matches on Subject: below --
2004-04-14 21:01 LSI Logic FC HBA / mptscsih hang Moore, Eric Dean
2004-04-14 21:16 ` Jan-Frode Myklebust
2004-04-17 15:45 ` Jan-Frode Myklebust
2004-04-19 14:01 ` Jan-Frode Myklebust
2004-04-19 14:53 Moore, Eric Dean
2004-04-19 15:07 ` Jan-Frode Myklebust
2004-04-19 15:18 ` Jan-Frode Myklebust
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20040414203000.GA21276@ii.uib.no \
--to=janfrode@parallab.uib.no \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox