From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mark Watts Subject: Re: aacraid does not work on dual opteron box - 2.6.7-rc2 Date: Wed, 9 Jun 2004 12:50:25 +0100 Sender: linux-scsi-owner@vger.kernel.org Message-ID: <200406091250.25860.m.watts@eris.qinetiq.com> References: <20040609083142.GB23062@szafa> Mime-Version: 1.0 Content-Type: Text/Plain; charset=US-ASCII Content-Transfer-Encoding: 7BIT Return-path: Received: from mail.eris.qinetiq.com ([128.98.1.1]:61029 "HELO mail.eris.qinetiq.com") by vger.kernel.org with SMTP id S265740AbUFILx1 convert rfc822-to-8bit (ORCPT ); Wed, 9 Jun 2004 07:53:27 -0400 In-Reply-To: <20040609083142.GB23062@szafa> Content-Disposition: inline List-Id: linux-scsi@vger.kernel.org To: linux-kernel@vger.kernel.org Cc: Sergiusz Pawlowicz , linux-scsi@vger.kernel.org -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 > Hello linux friends, > sorry for bothering you, but current aacraid still does not > work properly on my fresh dual opteron box & Adaptec 2120S > RAID controler. It hungs always after modprobing sd_mod and > disk access try. > Not sure if this helps but I'm running a Dual Opteron 248 with 2 (two) Adaptec AAR-2410SA cards in PCI-X slots on a Tyan S2885 board. # uname -a Linux localhost 2.6.3-7mdk-p3-smp-64GB #1 SMP Wed Mar 17 15:34:39 CET 2004 i686 unknown unknown GNU/Linux Red Hat/Adaptec aacraid driver (1.1.2-lk1 Mar 17 2004) AAC0: kernel 4.1.4 build 5934 AAC0: monitor 4.1.4 build 5934 AAC0: bios 4.1.0 build 5934 AAC0: serial ba7127fafaf001 scsi0 : aacraid Vendor: ADAPTEC Model: AAR-2410SA RAID5 Rev: V1.0 Type: Direct-Access ANSI SCSI revision: 02 AAC1: kernel 4.1.4 build 5934 AAC1: monitor 4.1.4 build 5934 AAC1: bios 4.1.0 build 5934 AAC1: serial bab51afafaf001 scsi1 : aacraid Vendor: ADAPTEC Model: AAR-2410SA Mirro Rev: V1.0 Type: Direct-Access ANSI SCSI revision: 02 SCSI device sda: 216790272 512-byte hdwr sectors (110997 MB) sda: Write Protect is off sda: Mode Sense: 03 00 00 00 SCSI device sda: drive cache: write through /dev/scsi/host0/bus0/target0/lun0: p1 Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0 SCSI device sdb: 72263424 512-byte hdwr sectors (36999 MB) sdb: Write Protect is off sdb: Mode Sense: 03 00 00 00 SCSI device sdb: drive cache: write through /dev/scsi/host1/bus0/target0/lun0: p1 p2 < p5 p6 > Attached scsi removable disk sdb at scsi1, channel 0, id 0, lun 0 AAC0 is a 4x36GB raid5 array with WD Raptor SATA drives AAC1 is a 2x36GB raid1 mirror with the same drives - From lsmod: sd_mod 18592 6 aacraid 45248 4 scsi_mod 121552 2 sd_mod,aacraid # uptime 13:55:38 up 22 days, 21:47, 1 user, load average: 0.00, 0.00, 0.00 This is a Mandrake 10.0 Official system. Mark. - -- Mark Watts Senior Systems Engineer QinetiQ Trusted Information Management Trusted Solutions and Services group GPG Public Key ID: 455420ED -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.4 (GNU/Linux) iD8DBQFAxvmBBn4EFUVUIO0RAobNAJ9VrbE2/gBxonNEw0kOyAGgXaU0+gCgimxx gci7EWybhvIRmaStjcS5FLI= =LyFx -----END PGP SIGNATURE-----